General Dynamics Corporation
Metal Finisher #1, 1st Shift (2)
Location:
US-ME-Saco, Saco, ME
Job ID:
2026-35429 |
Type:
Full Time |
# of Openings:
2 |
Category:
Skilled Trades
Job Summary Hourly Rate:
$27.55
The Metal Finisher #1 sets up and operates metal finishing equipment such as vibrators, tumbling barrels, shakers, magnetic separators and phosphate coating processes. Inspects parts for rust and scale and is responsible for quality of the work done on all parts leaving the phosphate coating area on his respective shift. Follows established company directives, policies, military specifications, quality documents and manufacturing instructions.
Responsibilities
Collect samples of phosphate coating solutions weekly; daily analyze phosphate solution for total and free acid as described in appropriate work instruction; add appropriate chemicals, prepares and runs samples for salt spray and coating weight testing daily per work instructions.
Operate abrasive cleaning equipment such as grit blast machines; use abrasive sanding discs, belts, wheels (including buffing, polishing wheels) and compounds; use trichloroethylene vapor degreaser, acid descaler and caustic cleaning compounds; plug or mask parts as necessary to protect items from abrasive or coating processes; may mix various types or combinations of abrasives depending on size, design, and material in order to meet specified finish; add media as they wear down; determine when cycles may be stopped to additional parts.
Process designated items through a heat treat oven during phosphate coating cycles to prevent hydrogen embrittlement; maintain daily logs of items that are heat treated in compliance with company and government directives; may start up, shut off and adjust oven temperatures.
Monitor condition of finishing media for glazed, loaded, or dull appearance; recondition media as necessary; use electrical hoist or manually lift trays, baskets, and racks containing parts to be finished; load and unload items from the various finishing processes.
Protect finished items from corrosion by applying oil or other rust inhibitors; use gauges during final sanding, buffing and polishing operations to ensure designated specifications; maintain cleanliness and serviceable condition of equipment by practicing good housekeeping policies. Physical capacity requirements: lift 35 lb. frequently and 50 lb. on occasion.
Qualifications
High school diploma or G.E.D. required.
No supervision required as to the mechanics of the job.
Must be capable of performing all tasks and duties of Metal Finisher #2 and #3.
May be required to enter and verify information into written forms or database(s) as appropriate.
Required to perform other duties as directed by supervision and follow detailed instructions.
Equal Employment Opportunity If you require assistance or an accommodation for a disability covered under the Americans with Disabilities Act, please email staffing@gd-ots.com or call: 727‑578‑8295. Please note this contact information is for those requesting a reasonable accommodation while applying for a job, because of a covered disability. General Dynamics Ordnance and Tactical Systems Equal Opportunity Employer / Individuals with Disabilities / Protected Veterans.
PI281236361
General Dynamics Ordnance and Tactical Systems is a global leader in the design, engineering and production of munitions, weapons, lightweight tactical vehicles, missile components and armament systems around the world.
#J-18808-Ljbffr
US-ME-Saco, Saco, ME
Job ID:
2026-35429 |
Type:
Full Time |
# of Openings:
2 |
Category:
Skilled Trades
Job Summary Hourly Rate:
$27.55
The Metal Finisher #1 sets up and operates metal finishing equipment such as vibrators, tumbling barrels, shakers, magnetic separators and phosphate coating processes. Inspects parts for rust and scale and is responsible for quality of the work done on all parts leaving the phosphate coating area on his respective shift. Follows established company directives, policies, military specifications, quality documents and manufacturing instructions.
Responsibilities
Collect samples of phosphate coating solutions weekly; daily analyze phosphate solution for total and free acid as described in appropriate work instruction; add appropriate chemicals, prepares and runs samples for salt spray and coating weight testing daily per work instructions.
Operate abrasive cleaning equipment such as grit blast machines; use abrasive sanding discs, belts, wheels (including buffing, polishing wheels) and compounds; use trichloroethylene vapor degreaser, acid descaler and caustic cleaning compounds; plug or mask parts as necessary to protect items from abrasive or coating processes; may mix various types or combinations of abrasives depending on size, design, and material in order to meet specified finish; add media as they wear down; determine when cycles may be stopped to additional parts.
Process designated items through a heat treat oven during phosphate coating cycles to prevent hydrogen embrittlement; maintain daily logs of items that are heat treated in compliance with company and government directives; may start up, shut off and adjust oven temperatures.
Monitor condition of finishing media for glazed, loaded, or dull appearance; recondition media as necessary; use electrical hoist or manually lift trays, baskets, and racks containing parts to be finished; load and unload items from the various finishing processes.
Protect finished items from corrosion by applying oil or other rust inhibitors; use gauges during final sanding, buffing and polishing operations to ensure designated specifications; maintain cleanliness and serviceable condition of equipment by practicing good housekeeping policies. Physical capacity requirements: lift 35 lb. frequently and 50 lb. on occasion.
Qualifications
High school diploma or G.E.D. required.
No supervision required as to the mechanics of the job.
Must be capable of performing all tasks and duties of Metal Finisher #2 and #3.
May be required to enter and verify information into written forms or database(s) as appropriate.
Required to perform other duties as directed by supervision and follow detailed instructions.
Equal Employment Opportunity If you require assistance or an accommodation for a disability covered under the Americans with Disabilities Act, please email staffing@gd-ots.com or call: 727‑578‑8295. Please note this contact information is for those requesting a reasonable accommodation while applying for a job, because of a covered disability. General Dynamics Ordnance and Tactical Systems Equal Opportunity Employer / Individuals with Disabilities / Protected Veterans.
PI281236361
General Dynamics Ordnance and Tactical Systems is a global leader in the design, engineering and production of munitions, weapons, lightweight tactical vehicles, missile components and armament systems around the world.
#J-18808-Ljbffr