RPMGlobal
Electrical Systems Integration Engineer
RPMGlobal, Allen Park, Michigan, United States, 48102
Job Summary
Our client in Allen Park, MI is looking for a Electrical Systems Integration Engineer. This is a contract position.
What You Will Do Vehicle Electrical Systems on-site support for DCV Prototype Launch including Systems Integration, Functional Testing, Key-Off-Load (KOL) Testing, Functional Anomaly Testing, KOL Anomaly Testing and Root Cause Analysis of Issues as well as internal customer vehicle issue resolutions and support tasks for System Integration Technical Design Reviews at specified milestones.
Support On-Site Plant EOL Launch Build Support and Root Cause Analysis
EOL Validation at DSC of all IVS released SW releases ahead of the Tooling Trial and Pilot Production Build Start and vehicle (s) procurement for the EOL validation
Ensure all EOL Validation supported software releases are tested and signed-off
Bus Queries on EOL Vehicles as needed to confirm SW pedigree and flash updated
Complete Functional / Functional Anomaly Testing on production launch vehicles before sign-off
Complete KOL / KOL Anomaly Testing on prototype and production launch to ensure a good sample to validate that there are no modules keeping the bus awake after Ignition Off
Support and facilitate closure of AIMs issues with 48 hours turnaround
Support and facilitate closure of JIRA / GIMT issues
Support Daily Build Walk Around and End of Shift meetings
Support resolution of DEMS/VoCF/R202 and PVP Drive Issues
Track and work with interfacing engineers to close out open Diagnostic Trouble Shooting Codes for their modules
Support interfacing engineers 5D / 8D to triage and root cause issues
Support PEC / FEC Systems PV DVPs assessed with test validation where needed and supply completion dates
Support any updated to the required to the Physical Schematics and conduct compatibility reviews and review updates with TS
Support any required Engineering Deviations and help to get approved and uploaded to FEDE
Support any Campaign Prevent Items reviewed with Systems Tech Specialist (TS) and updates made to PAAT and signed
Support Netcom to any updates to their published draft VSCS
Work with VE/VI team and EOL Engineer to put plan in place for EOL Software validation at DSC
PEC / FEC TDR with System TS Complete
What You Will Need Basics
BS Mechanical Engineering or Electrical Engineering (or equivalent)
5+ years experience in automotive electrical systems
5+ years of disciplined, team-based problem solving (6 Sigma preferred)
Understanding of GPDS deliverables and basic Ford Engineering tools (FEDE BOM / WERS / GPDS / Bill of Material / FMA / AIMS / 8Ds / FEDE DVP / Engineering Sign Off / DFMEA / Six Sigma)
Experience launching new vehicles and working with a Cross-functional Team
Experience with Vector CAN tools, (DET) Diagnostic Engineering Tool, Multimeter, Module Software flashing, CAN network troubleshooting, Bus Queries, Radmoon, CAN log and data collection, MyCanic Tool, Vehicle configuration (VSCS)
How You Will Be Successful
Envision the Future
Communicate Honestly and Broadly
Seek Technology and Business “First”
Embrace Diversity and Take Risks
What We Offer
Competitive Salary
Comprehensive Benefit Package
401(k) with matching contributions
Paid Time Off
Employee Discounts
Free training on all Altair products
Why Work with Us: Altair is a global technology company providing software and cloud solutions in the area of data analytics, product development, and high-performance computing (HPC). Altair enables organizations in nearly every industry to compete more effectively in a connected world, while creating a more sustainable future. With more than 3,000 engineers, scientists, and creative thinkers in 25 countries, we help solve our customer’s toughest challenges and deliver unparalleled service, helping the innovators innovate, drive better decisions, and turn today’s problems into tomorrow’s opportunities.
Our vision is to transform customer decision making with data analytics, simulation, and high-performance computing.
For more than 30 years, we have been helping our customers integrate electronics and controls with mechanical design to expand product value, develop AI, simulation and data-driven digital twins to drive better decisions, and deliver advanced HPC and cloud solutions to support unlimited idea exploration. To learn more, please visit
altair.com
Ready to go? #ONLYFORWARD
At our core we are explorers; adventures; pioneers. We are the brains behind some of the world’s most revolutionary innovations and are not only comfortable in new and unchartered waters, we dive headfirst. We are the original trailblazers that make the impossible possible, discovering new solutions to our customer’s toughest challenges.
Altair is an equal opportunity employer. Our backgrounds are diverse, and every member of our global team is critical to our success. Altair’s history demonstrates a belief that empowering each individual authentic voice reinforces a culture that thrives because of the uniqueness among our team.
#J-18808-Ljbffr
What You Will Do Vehicle Electrical Systems on-site support for DCV Prototype Launch including Systems Integration, Functional Testing, Key-Off-Load (KOL) Testing, Functional Anomaly Testing, KOL Anomaly Testing and Root Cause Analysis of Issues as well as internal customer vehicle issue resolutions and support tasks for System Integration Technical Design Reviews at specified milestones.
Support On-Site Plant EOL Launch Build Support and Root Cause Analysis
EOL Validation at DSC of all IVS released SW releases ahead of the Tooling Trial and Pilot Production Build Start and vehicle (s) procurement for the EOL validation
Ensure all EOL Validation supported software releases are tested and signed-off
Bus Queries on EOL Vehicles as needed to confirm SW pedigree and flash updated
Complete Functional / Functional Anomaly Testing on production launch vehicles before sign-off
Complete KOL / KOL Anomaly Testing on prototype and production launch to ensure a good sample to validate that there are no modules keeping the bus awake after Ignition Off
Support and facilitate closure of AIMs issues with 48 hours turnaround
Support and facilitate closure of JIRA / GIMT issues
Support Daily Build Walk Around and End of Shift meetings
Support resolution of DEMS/VoCF/R202 and PVP Drive Issues
Track and work with interfacing engineers to close out open Diagnostic Trouble Shooting Codes for their modules
Support interfacing engineers 5D / 8D to triage and root cause issues
Support PEC / FEC Systems PV DVPs assessed with test validation where needed and supply completion dates
Support any updated to the required to the Physical Schematics and conduct compatibility reviews and review updates with TS
Support any required Engineering Deviations and help to get approved and uploaded to FEDE
Support any Campaign Prevent Items reviewed with Systems Tech Specialist (TS) and updates made to PAAT and signed
Support Netcom to any updates to their published draft VSCS
Work with VE/VI team and EOL Engineer to put plan in place for EOL Software validation at DSC
PEC / FEC TDR with System TS Complete
What You Will Need Basics
BS Mechanical Engineering or Electrical Engineering (or equivalent)
5+ years experience in automotive electrical systems
5+ years of disciplined, team-based problem solving (6 Sigma preferred)
Understanding of GPDS deliverables and basic Ford Engineering tools (FEDE BOM / WERS / GPDS / Bill of Material / FMA / AIMS / 8Ds / FEDE DVP / Engineering Sign Off / DFMEA / Six Sigma)
Experience launching new vehicles and working with a Cross-functional Team
Experience with Vector CAN tools, (DET) Diagnostic Engineering Tool, Multimeter, Module Software flashing, CAN network troubleshooting, Bus Queries, Radmoon, CAN log and data collection, MyCanic Tool, Vehicle configuration (VSCS)
How You Will Be Successful
Envision the Future
Communicate Honestly and Broadly
Seek Technology and Business “First”
Embrace Diversity and Take Risks
What We Offer
Competitive Salary
Comprehensive Benefit Package
401(k) with matching contributions
Paid Time Off
Employee Discounts
Free training on all Altair products
Why Work with Us: Altair is a global technology company providing software and cloud solutions in the area of data analytics, product development, and high-performance computing (HPC). Altair enables organizations in nearly every industry to compete more effectively in a connected world, while creating a more sustainable future. With more than 3,000 engineers, scientists, and creative thinkers in 25 countries, we help solve our customer’s toughest challenges and deliver unparalleled service, helping the innovators innovate, drive better decisions, and turn today’s problems into tomorrow’s opportunities.
Our vision is to transform customer decision making with data analytics, simulation, and high-performance computing.
For more than 30 years, we have been helping our customers integrate electronics and controls with mechanical design to expand product value, develop AI, simulation and data-driven digital twins to drive better decisions, and deliver advanced HPC and cloud solutions to support unlimited idea exploration. To learn more, please visit
altair.com
Ready to go? #ONLYFORWARD
At our core we are explorers; adventures; pioneers. We are the brains behind some of the world’s most revolutionary innovations and are not only comfortable in new and unchartered waters, we dive headfirst. We are the original trailblazers that make the impossible possible, discovering new solutions to our customer’s toughest challenges.
Altair is an equal opportunity employer. Our backgrounds are diverse, and every member of our global team is critical to our success. Altair’s history demonstrates a belief that empowering each individual authentic voice reinforces a culture that thrives because of the uniqueness among our team.
#J-18808-Ljbffr