Og&e
We are hiring for either a Planner Staff or Planner Senior based on candidates' qualifications.
Responsible to plan and schedule resources needed for future and reactive work, to include required skills, materials, specialized equipment, and contract services. Gathers and analyzes information in order to maximize the efficiency of our maintenance resources and improve equipment reliability. Evaluates current procedures and recommends changes to improve the efficiency of planning and scheduling maintenance activities.
LEVEL OF RESPONSIBILITY
General responsibilities with standardized processes. Works under limited supervision. Resolves routine questions and problems. Refers the more complex issues to higher levels. Follows established procedures to accomplish requirements of job. Some latitude for deviation.
ESSENTIAL FUNCTIONS
Ensures proper functional location numbers are assigned.
Works with the Maintenance Engineer to develop and administer the Preventive Maintenance Plans.
Create requisitions as needed, in SAP, for materials, equipment, contract services, etc.
Work with Supply Chain to research, source and order parts, request services and to contribute to continuous improvement.
Identify needed resources including man power, tools, material and equipment.
Create appropriate scope of work and task lists.
Perform job site inspections to identify specific hazards, complicating factors and unexpected conditions associated with the location.
Create work orders from notifications after reviewing for completeness and clarity.
Responsible to promote a safety culture by modeling and coaching behaviors consistent with IIF (Incident and Injury Free).
Establish time and cost estimates.
Develop and maintain job packages for members to use in the execution of their work.
Acts as the plant contact for various contract services.
Maintain correct work order status in SAP.
Request Material Master set up for new materials.
Complete notifications when order is TECO’d.
Review completed work order for completeness and accuracy before changing status to Technically Complete (TECO).
Work with Maintenance Supervisors to determine available resources and carry-over work.
Maintain backlog of Available to Schedule (ATS) work orders for use in preparing weekly schedule.
Create and maintain SAP Master Data related to the maintenance process.
Create weekly schedule for maintenance crews.
All other duties as assigned.
REQUIREMENTS
Staff Qualifications:
High School Diploma/GED and 5 years work experience in a power plant, manufacturing, or process plant with technical, mechanical, or operational role (e.g., Instrument and Control Technician, Plant Mechanic, Auxiliary or Control Operator, or Plant Electrician); or
High School Diploma/GED and 7 years work experience in Material Handling and/or mechanical/technical experience to include 2 years in a mechanical/technical role within a commercial or industrial setting combined with demonstrated experience in procure to pay process.
Senior Qualifications:
High School Diploma/GED and 5 years directly related work experience (e.g., power plant or process plant) to include 2 years of Journey level technical/mechanical experience (e.g., Instrument and Control Technician, Plant Mechanic, Auxiliary or Control Operator, Plant Electrician).
3 years of Power Generation Planning work experience (e.g., Power Plant Crew, System, Outage).
WORKING CONDITIONS
Office environment and regular trips into shop or plant.
May be required to work non-standard work schedules for either planned or emergent work opportunities.
Requires travel within the company service territory to overnight stays.
May be required to wear PPE such as hard hat, safety glasses, flame retardant clothing, steel-toed boots, hearing protection, fall protection harness and/or respirator, as applicable.
May be exposed to extreme conditions and inclement weather.
PHYSICAL DEMANDS - LIFTING AND OTHER WEIGHT REQMTS General Requirements
Occasionally: Pushing
Occasionally: Climbing
Occasionally: Crouching
Occasionally: Reaching
Occasionally: Repetitive Motions
Frequently: Sitting
Lifting & Other Weight Requirements
Occasionally: Lifting up to 50 lbs
Occasionally: Carrying up to 50 lbs
SPECIAL SAFETY REQUIREMENTS
Member will not be required to drive in order to perform their job duties.
The operation, maintenance or oversight of critical services and infrastructure including but not limited to, electric utilities, power generation or distribution;
Repairing, maintaining or monitoring the performance or operation of any equipment, machinery or manufacturing process, the malfunction or disruption of which could result in injury or property damage;
Ability to adjust and adapt across varied working conditions and evolving business needs.
Computer skills with knowledge of MS-Office Suite (e.g., Word, Excel, PowerPoint, Outlook) and company software used for planning and reporting (e.g., SAP maintenance process).
Ability to leverage and make optimal use of both internal and external resources.
Ability to understand and comply with company policies and Standard Operating Procedures (SOPs).
Ability to troubleshoot and diagnosis problems, and resolve them effectively.
Ability to work independently and as part of a team.
Ability to understand systems and processes.
Ability to manage multiple projects and assignments as required by workload.
Ability to interact effectively, and professionally with team members, leaders, vendors, contractors, and others.
Demonstrated time-management skills to deliver results.
Ability to multi-task, prioritize and meet deadlines.
Ability to communicate effectively in speech and writing.
Demonstrated ability to lead in an IIF (Incident and Injury Free) culture.
HEALTH AND SAFETY (MEDICAL/DOT REQUIREMENTS)
Exams position specific – Consult Health & Safety
Job Specific Physical Assessment
This position is classified as a Safety-Sensitive Job under state law. Individuals in this position are subject to the terms and conditions set forth in OGE Energy Corp.’s Drug Testing Plan.
#J-18808-Ljbffr
Responsible to plan and schedule resources needed for future and reactive work, to include required skills, materials, specialized equipment, and contract services. Gathers and analyzes information in order to maximize the efficiency of our maintenance resources and improve equipment reliability. Evaluates current procedures and recommends changes to improve the efficiency of planning and scheduling maintenance activities.
LEVEL OF RESPONSIBILITY
General responsibilities with standardized processes. Works under limited supervision. Resolves routine questions and problems. Refers the more complex issues to higher levels. Follows established procedures to accomplish requirements of job. Some latitude for deviation.
ESSENTIAL FUNCTIONS
Ensures proper functional location numbers are assigned.
Works with the Maintenance Engineer to develop and administer the Preventive Maintenance Plans.
Create requisitions as needed, in SAP, for materials, equipment, contract services, etc.
Work with Supply Chain to research, source and order parts, request services and to contribute to continuous improvement.
Identify needed resources including man power, tools, material and equipment.
Create appropriate scope of work and task lists.
Perform job site inspections to identify specific hazards, complicating factors and unexpected conditions associated with the location.
Create work orders from notifications after reviewing for completeness and clarity.
Responsible to promote a safety culture by modeling and coaching behaviors consistent with IIF (Incident and Injury Free).
Establish time and cost estimates.
Develop and maintain job packages for members to use in the execution of their work.
Acts as the plant contact for various contract services.
Maintain correct work order status in SAP.
Request Material Master set up for new materials.
Complete notifications when order is TECO’d.
Review completed work order for completeness and accuracy before changing status to Technically Complete (TECO).
Work with Maintenance Supervisors to determine available resources and carry-over work.
Maintain backlog of Available to Schedule (ATS) work orders for use in preparing weekly schedule.
Create and maintain SAP Master Data related to the maintenance process.
Create weekly schedule for maintenance crews.
All other duties as assigned.
REQUIREMENTS
Staff Qualifications:
High School Diploma/GED and 5 years work experience in a power plant, manufacturing, or process plant with technical, mechanical, or operational role (e.g., Instrument and Control Technician, Plant Mechanic, Auxiliary or Control Operator, or Plant Electrician); or
High School Diploma/GED and 7 years work experience in Material Handling and/or mechanical/technical experience to include 2 years in a mechanical/technical role within a commercial or industrial setting combined with demonstrated experience in procure to pay process.
Senior Qualifications:
High School Diploma/GED and 5 years directly related work experience (e.g., power plant or process plant) to include 2 years of Journey level technical/mechanical experience (e.g., Instrument and Control Technician, Plant Mechanic, Auxiliary or Control Operator, Plant Electrician).
3 years of Power Generation Planning work experience (e.g., Power Plant Crew, System, Outage).
WORKING CONDITIONS
Office environment and regular trips into shop or plant.
May be required to work non-standard work schedules for either planned or emergent work opportunities.
Requires travel within the company service territory to overnight stays.
May be required to wear PPE such as hard hat, safety glasses, flame retardant clothing, steel-toed boots, hearing protection, fall protection harness and/or respirator, as applicable.
May be exposed to extreme conditions and inclement weather.
PHYSICAL DEMANDS - LIFTING AND OTHER WEIGHT REQMTS General Requirements
Occasionally: Pushing
Occasionally: Climbing
Occasionally: Crouching
Occasionally: Reaching
Occasionally: Repetitive Motions
Frequently: Sitting
Lifting & Other Weight Requirements
Occasionally: Lifting up to 50 lbs
Occasionally: Carrying up to 50 lbs
SPECIAL SAFETY REQUIREMENTS
Member will not be required to drive in order to perform their job duties.
The operation, maintenance or oversight of critical services and infrastructure including but not limited to, electric utilities, power generation or distribution;
Repairing, maintaining or monitoring the performance or operation of any equipment, machinery or manufacturing process, the malfunction or disruption of which could result in injury or property damage;
Ability to adjust and adapt across varied working conditions and evolving business needs.
Computer skills with knowledge of MS-Office Suite (e.g., Word, Excel, PowerPoint, Outlook) and company software used for planning and reporting (e.g., SAP maintenance process).
Ability to leverage and make optimal use of both internal and external resources.
Ability to understand and comply with company policies and Standard Operating Procedures (SOPs).
Ability to troubleshoot and diagnosis problems, and resolve them effectively.
Ability to work independently and as part of a team.
Ability to understand systems and processes.
Ability to manage multiple projects and assignments as required by workload.
Ability to interact effectively, and professionally with team members, leaders, vendors, contractors, and others.
Demonstrated time-management skills to deliver results.
Ability to multi-task, prioritize and meet deadlines.
Ability to communicate effectively in speech and writing.
Demonstrated ability to lead in an IIF (Incident and Injury Free) culture.
HEALTH AND SAFETY (MEDICAL/DOT REQUIREMENTS)
Exams position specific – Consult Health & Safety
Job Specific Physical Assessment
This position is classified as a Safety-Sensitive Job under state law. Individuals in this position are subject to the terms and conditions set forth in OGE Energy Corp.’s Drug Testing Plan.
#J-18808-Ljbffr