Kent Express Employment Professionals
CNC Machine Operator III
Day Shift: Monday - Friday 6:00 am to 2:30 pm
Machine Operators operate computer‑controlled machines to perform one or more machine functions required to produce customer orders. Skilled Machine Operators are critical to our success, and the reliability and accuracy of our operators is essential.
Essential Functions
Sets up and operates automated CNC Vertical and horizontal machines
Accurately locates/identifies the X, Y, Z axis on Vertical and Horizontal machines
Uses indicators to verify flatness and straightness of fixturing and tooling
Performs daily point checks on assigned machines and reports concerns to supervisor; may initiate maintenance requests if appropriate
Meets departmental/company goals and objectives promptly (i.e.: efficiencies, scrap control, time motion and setup time reductions)
Accurately interprets product blueprints, drawings, sketches, set up sheets and other work instructions
Uses scales, calipers, micrometers, and height gauges to determine that the part is being machined to the proper specifications
Completes complex rework on machined parts as required; repairs fixtures as needed
Removes and replaces dull cutting tools; following designated safety protocol and instructions
Mounts, installs, aligns, and secures tools, attachments, fixtures, and workpieces on machines, using hand tools and precision measuring instruments
Listens to machines during operation to detect irregular sounds (i.e. dull cutting tools or excessive vibration); adjusts machines to compensate for problems and notifies lead or supervisory personnel as appropriate
Adjusts machine feed and speed, changes cutting tools, or adjusts machine controls when automatic programming is faulty or if machines malfunction
Stops machines to remove finished workpieces or to change tooling, setup, or workpiece placement according to required machining sequences
Lifts workpieces to machines manually or with hoists or cranes
Transfers programs from servers to computer numerical control (CNC) modules, using computer network links
Enters control instructions into machine control units to start operation
Troubleshoots production issues and program edits
Monitors and adjusts/controls coolant systems as needed
Sets up future jobs, performs inspections or part checks, cleans work area, or performs other duties while machines are operating
May assist in training new operators
May deburr machined parts as required for work in process
May operate forklift (on-site certification required if applicable)
Follows all safety policies and procedures; consistently utilizes all required personal protective equipment (PPE)
Communicates verbally (English) and follows verbal and written instructions
Performs other tasks and/or assignments as required
Regular attendance on-site at the workplace is required
Required Education and Work Experience
High School diploma or GED equivalent is required
Vocational training/certification in machining is preferred
A minimum of three (3) years experience in a manufacturing role utilizing complex multi‑axis machining centers is required; relevant apprenticeship or vocational training in a machine shop, manufacturing technology, or similar program may be considered in combination with paid work experience
Other Required Skills and Abilities
Experience reading & accurately interpreting shop blueprints, sketches, and other technical information/instructions is required
Demonstrated basic math skills (add, subtract, multiply, divide, fraction conversions)
Experience using mics, calipers, height gauges, and other precision measuring equipment is required
Experience using indicators to verify flatness and straightness of tooling and fixturing
Experience troubleshooting production issues and program edits
A history of consistent employment without unexplained or significant gaps or frequent job changes is expected
Completion of assigned internal training for Level III Operators, and periodic retraining or recertification is required
Experience using cranes, forklifts, and similar heavy & oversized material handling equipment is preferred
Physical Demands and Work Environment To perform the essential functions of the role, employees must be able to perform the following activities with or without reasonable accommodations:
Regularly stand and walk throughout the facility, stand for long periods to perform job duties
Regularly lift, carry (short distances), and push/pull up to 100 pounds using peer assistance and/or other lifting & material‑handling equipment
Occasionally reaches overhead and reaches out or down to perform duties
Frequently climb steps, stairs, or ladders
Occasionally bend, crawl, stoop, squat, or kneel
Frequently uses hand or fingers to manually inspect parts, tighten hardware & fixtures, and operate machine and material handling controls
Accurately distinguish colors to respond to sensors, indicators, and color‑variable dashboards
Visual acuity to interpret readings on gauges and other measuring devices
Working Conditions Work is performed in a manufacturing shop environment where working conditions may vary significantly; the employee will be exposed to:
Excessive noise (hearing protection required)
Dust, smoke, mist, fumes/vapors (regularly)
Extreme temperatures (occasionally)
Hazardous equipment including forklifts, hand tools, cranes or other lifting devices, and other equipment used in a machine shop environment (continually)
The use of PPE, including hearing protection, eye and hand protection, and use of safety footwear is required. This position is classified as safety‑sensitive. This position must meet ITAR (International Traffic in Arms Regulations) compliance; therefore, qualified candidates must meet the definition of a U.S. Person (per EAR Part 772 and ITAR 120.15):
An individual who is granted U.S. citizenship, or
An individual who is granted U.S. permanent residence (i.e., a "Green Card" holder), or
An individual who is granted status as a "protected person"
#KWA
#J-18808-Ljbffr
Essential Functions
Sets up and operates automated CNC Vertical and horizontal machines
Accurately locates/identifies the X, Y, Z axis on Vertical and Horizontal machines
Uses indicators to verify flatness and straightness of fixturing and tooling
Performs daily point checks on assigned machines and reports concerns to supervisor; may initiate maintenance requests if appropriate
Meets departmental/company goals and objectives promptly (i.e.: efficiencies, scrap control, time motion and setup time reductions)
Accurately interprets product blueprints, drawings, sketches, set up sheets and other work instructions
Uses scales, calipers, micrometers, and height gauges to determine that the part is being machined to the proper specifications
Completes complex rework on machined parts as required; repairs fixtures as needed
Removes and replaces dull cutting tools; following designated safety protocol and instructions
Mounts, installs, aligns, and secures tools, attachments, fixtures, and workpieces on machines, using hand tools and precision measuring instruments
Listens to machines during operation to detect irregular sounds (i.e. dull cutting tools or excessive vibration); adjusts machines to compensate for problems and notifies lead or supervisory personnel as appropriate
Adjusts machine feed and speed, changes cutting tools, or adjusts machine controls when automatic programming is faulty or if machines malfunction
Stops machines to remove finished workpieces or to change tooling, setup, or workpiece placement according to required machining sequences
Lifts workpieces to machines manually or with hoists or cranes
Transfers programs from servers to computer numerical control (CNC) modules, using computer network links
Enters control instructions into machine control units to start operation
Troubleshoots production issues and program edits
Monitors and adjusts/controls coolant systems as needed
Sets up future jobs, performs inspections or part checks, cleans work area, or performs other duties while machines are operating
May assist in training new operators
May deburr machined parts as required for work in process
May operate forklift (on-site certification required if applicable)
Follows all safety policies and procedures; consistently utilizes all required personal protective equipment (PPE)
Communicates verbally (English) and follows verbal and written instructions
Performs other tasks and/or assignments as required
Regular attendance on-site at the workplace is required
Required Education and Work Experience
High School diploma or GED equivalent is required
Vocational training/certification in machining is preferred
A minimum of three (3) years experience in a manufacturing role utilizing complex multi‑axis machining centers is required; relevant apprenticeship or vocational training in a machine shop, manufacturing technology, or similar program may be considered in combination with paid work experience
Other Required Skills and Abilities
Experience reading & accurately interpreting shop blueprints, sketches, and other technical information/instructions is required
Demonstrated basic math skills (add, subtract, multiply, divide, fraction conversions)
Experience using mics, calipers, height gauges, and other precision measuring equipment is required
Experience using indicators to verify flatness and straightness of tooling and fixturing
Experience troubleshooting production issues and program edits
A history of consistent employment without unexplained or significant gaps or frequent job changes is expected
Completion of assigned internal training for Level III Operators, and periodic retraining or recertification is required
Experience using cranes, forklifts, and similar heavy & oversized material handling equipment is preferred
Physical Demands and Work Environment To perform the essential functions of the role, employees must be able to perform the following activities with or without reasonable accommodations:
Regularly stand and walk throughout the facility, stand for long periods to perform job duties
Regularly lift, carry (short distances), and push/pull up to 100 pounds using peer assistance and/or other lifting & material‑handling equipment
Occasionally reaches overhead and reaches out or down to perform duties
Frequently climb steps, stairs, or ladders
Occasionally bend, crawl, stoop, squat, or kneel
Frequently uses hand or fingers to manually inspect parts, tighten hardware & fixtures, and operate machine and material handling controls
Accurately distinguish colors to respond to sensors, indicators, and color‑variable dashboards
Visual acuity to interpret readings on gauges and other measuring devices
Working Conditions Work is performed in a manufacturing shop environment where working conditions may vary significantly; the employee will be exposed to:
Excessive noise (hearing protection required)
Dust, smoke, mist, fumes/vapors (regularly)
Extreme temperatures (occasionally)
Hazardous equipment including forklifts, hand tools, cranes or other lifting devices, and other equipment used in a machine shop environment (continually)
The use of PPE, including hearing protection, eye and hand protection, and use of safety footwear is required. This position is classified as safety‑sensitive. This position must meet ITAR (International Traffic in Arms Regulations) compliance; therefore, qualified candidates must meet the definition of a U.S. Person (per EAR Part 772 and ITAR 120.15):
An individual who is granted U.S. citizenship, or
An individual who is granted U.S. permanent residence (i.e., a "Green Card" holder), or
An individual who is granted status as a "protected person"
#KWA
#J-18808-Ljbffr