Valid8 Financial, Inc.
Operate machinery to supply the Foaming station with correct and properly roll formed metal to maintain continuous quality production of insulated metal panels.
Essential Functions
Understand and demonstrate:
Panel and profile identification
Verification of scheduled production run against the BOM
QC standards of the Foaming station
Startup and shut down procedures
Changeover procedures
Manual/remote control vs. automatic operations
Care and cleaning of equipment
Change over procedures, tooling and guide setup
Equipment adjustments to correct product defects
Parameter entry and screen navigation
Containment and double belt setup
Mix head calibration and rebuilding
Pour bar cleaning and assembly procedures
Side tape selection and application
Bond enhancer setup and operation
Coil splicing procedure
Proper chemical handling
Chemical room pump operations and offloading procedures
Use of tape measure
Math using US standard and metric system
Inventory procedures.
Effectively communicate with other stations.
Continually monitor the product throughout the production run and ensure Quality and Product Compliance Requirements are met.
Notify QC and Foreman of any product issues immediately.
Continually monitor production equipment.
Notify Maintenance and Foreman of any equipment issues immediately.
Ensure area is organized and clean.
Complete and maintain forklift certification.
Complete training by Lead Operator/Foreman/Supervisor.
Complies with all safety and company policies and procedures.
Performs other related duties as assigned.
Knowledge, Skills, and Abilities
Know how to run machines, load packaging onto machine.
Know how to perform routine maintenance tasks.
Knowledge of safety rules, correct machine operation, common sense.
Ability to add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions, and decimals.
Education and Experience
Must have mathematic proficiency to include arithmetic (addition, subtraction, multiplication, and division), as well as adding and subtracting fractions.
Must have the ability to accurately use a tape measure.
Must be proficient with the metric measurement system.
Must have a high level of attention to detail.
Physical Requirements
Ability to work up to 12 hours per day. Hours, days and shifts depend on the production schedule, and are not guaranteed.
Ability to sit, stand, walk, bend, climb stairs, crouch, lean, reach, twist, and other physical movements for extended periods of time.
Ability to work in conditions typical of a manufacturing environment as indicated below under “Working Environment”.
Ability to wear prescribed personal protective equipment and appropriate clothing.
Ability to lift 50 lbs.
Ability to read, write, type, and verbally communicate fluently in English.
Must be able to effectively use a computer, monitor, keyboard, mouse, and commonly used software to complete necessary functions assigned.
Must have finger dexterity, visual acuity, discernment of sounds, color, and texture.Must be able to use tools, equipment, machinery, etc.
Must be reliable and dependable.
Must have the physical and mental ability to drive a standard forklift successfully. AWIP will certify.
Benefits of Working with Us:
We offer a professional but family-oriented culture. Our benefits package is comprehensive, including medical(80% of plan premiums covered) dental, and vision with no waiting period to enroll! 401k with up to 4% matching, life, and AD&D insurance, disability insurance, shopping discount program, employee assistance program, and Quarterly Bonus Program for all employees!
About Us:
Headquartered in Vacaville, California, All Weather Insulated Panels (AWIP), has three state-of-the-art continuous-line manufacturing facilities including Vacaville, California, East Stroudsburg, Pennsylvania, and Little Rock, Arkansas. AWIP is an innovator in the design, construction, and advancement of insulated metal panels and is strategically positioned to meet the growing energy, environmental and economic challenges facing the North American building industry. AWIP provides its customers with a broad line of insulated wall and roof panels and a full range of complementary trims, accessories, and engineering services.
While performing the duties of this job, the employee is regularly exposed to work near moving mechanical parts, dusty conditions, high noise environments, chemicals used in the process, and extreme temperatures. The facility is an industrial manufacturing plant.
AWIP is a drug-free workplace. This is a safety-sensitive position. #J-18808-Ljbffr
Essential Functions
Understand and demonstrate:
Panel and profile identification
Verification of scheduled production run against the BOM
QC standards of the Foaming station
Startup and shut down procedures
Changeover procedures
Manual/remote control vs. automatic operations
Care and cleaning of equipment
Change over procedures, tooling and guide setup
Equipment adjustments to correct product defects
Parameter entry and screen navigation
Containment and double belt setup
Mix head calibration and rebuilding
Pour bar cleaning and assembly procedures
Side tape selection and application
Bond enhancer setup and operation
Coil splicing procedure
Proper chemical handling
Chemical room pump operations and offloading procedures
Use of tape measure
Math using US standard and metric system
Inventory procedures.
Effectively communicate with other stations.
Continually monitor the product throughout the production run and ensure Quality and Product Compliance Requirements are met.
Notify QC and Foreman of any product issues immediately.
Continually monitor production equipment.
Notify Maintenance and Foreman of any equipment issues immediately.
Ensure area is organized and clean.
Complete and maintain forklift certification.
Complete training by Lead Operator/Foreman/Supervisor.
Complies with all safety and company policies and procedures.
Performs other related duties as assigned.
Knowledge, Skills, and Abilities
Know how to run machines, load packaging onto machine.
Know how to perform routine maintenance tasks.
Knowledge of safety rules, correct machine operation, common sense.
Ability to add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions, and decimals.
Education and Experience
Must have mathematic proficiency to include arithmetic (addition, subtraction, multiplication, and division), as well as adding and subtracting fractions.
Must have the ability to accurately use a tape measure.
Must be proficient with the metric measurement system.
Must have a high level of attention to detail.
Physical Requirements
Ability to work up to 12 hours per day. Hours, days and shifts depend on the production schedule, and are not guaranteed.
Ability to sit, stand, walk, bend, climb stairs, crouch, lean, reach, twist, and other physical movements for extended periods of time.
Ability to work in conditions typical of a manufacturing environment as indicated below under “Working Environment”.
Ability to wear prescribed personal protective equipment and appropriate clothing.
Ability to lift 50 lbs.
Ability to read, write, type, and verbally communicate fluently in English.
Must be able to effectively use a computer, monitor, keyboard, mouse, and commonly used software to complete necessary functions assigned.
Must have finger dexterity, visual acuity, discernment of sounds, color, and texture.Must be able to use tools, equipment, machinery, etc.
Must be reliable and dependable.
Must have the physical and mental ability to drive a standard forklift successfully. AWIP will certify.
Benefits of Working with Us:
We offer a professional but family-oriented culture. Our benefits package is comprehensive, including medical(80% of plan premiums covered) dental, and vision with no waiting period to enroll! 401k with up to 4% matching, life, and AD&D insurance, disability insurance, shopping discount program, employee assistance program, and Quarterly Bonus Program for all employees!
About Us:
Headquartered in Vacaville, California, All Weather Insulated Panels (AWIP), has three state-of-the-art continuous-line manufacturing facilities including Vacaville, California, East Stroudsburg, Pennsylvania, and Little Rock, Arkansas. AWIP is an innovator in the design, construction, and advancement of insulated metal panels and is strategically positioned to meet the growing energy, environmental and economic challenges facing the North American building industry. AWIP provides its customers with a broad line of insulated wall and roof panels and a full range of complementary trims, accessories, and engineering services.
While performing the duties of this job, the employee is regularly exposed to work near moving mechanical parts, dusty conditions, high noise environments, chemicals used in the process, and extreme temperatures. The facility is an industrial manufacturing plant.
AWIP is a drug-free workplace. This is a safety-sensitive position. #J-18808-Ljbffr