Connexzia
Job Description:
JOB DESCRIPTION:
We have a Controls Engineer position open in Orlando, FL. This position is responsible for electrical/controls engineering on large-scale projects. Project requirements involve control system design from scratch (hardware/software/network), electrical panel design and power calculations, risk assessment, component selection and configuration, control system programming, and control system installation/commissioning.
Compensation info: The salary is around $125K base for 5 years of control system design experience. Salary would go up depending on years of experience.
RESPONSIBILITIES:
* Responsible for system design from blank sheet of paper to create concept of electrical/control components based on project requirements.
* Experience doing design via drafting software (AutoCAD preferred)
* Provide input, and system modification as needed, for system integration with other project disciplines
* Able to interface with facility design to optimize panel location minimizing voltage drop and designing a more efficient system hardware layout
* Manage vendor scope to verify safety, functionality, and all contract requirements are satisfied
* Ensures design complies with any local or government agency design/implementation codes in addition to client codes/standards
* Project technical risk assessment document generation and mitigation implementation
* Design and analysis for safety-critical parts within a control system
* Designing redundant mitigations in system to increase safety and reliability
* Designing systems with complex motion and integration from automated systems
* Develops documents of system configuration and design. Documents include Description of operation, Detailed control system design description, panel assembly drawings and schematics, termination drawings, network layout, system implementation/acceptance test plans, system routine maintenance/job plans
* Able to perform the following system design calculations/analysis: Short circuit protection, harmonics, noise reduction/cancellation, power consumption, load flow, short circuit protection, protective relay/circuit design, ground fault monitoring, safety system implementation (SIL/PL rating knowledge is preferred)
* Knowledge of ride system design for attractions involving guests is preferred
* Capable of working off shifts as needed during installation/commissioning to support project
QUALIFICATIONS:
* Must be organized, technically competent, have effective oral and written communications, experienced in working in a multi-disciplined environment and interfacing with engineers, designers, and drafters.
* Education Bachelors degree in electrical engineering. (Bachelors degrees in other disciplines may be acceptable if work experience is directly related to electrical engineering. Disciplines outside of the electrical/controls area will not be considered)
* Experience
* 5+ years of experience covering most responsibilities listed above. Preferred experience in ASTM standards, attractions industry, and safety engineering.
* Key Competencies
* Knowledge of contract documents and specifications. Ability to collect field data and accurately record findings.
* Ability to perform system design functions. Planning, Customer Focused, Timely Decision Making, Informing, Organizing, Priority Setting, Problem Solving.
* Experience working with hardware/software from one of the major industrial manufacturers (i.e. Allen-Bradly, Siemens, etc.).
* Experience with ethernet-based distributed remote I/O systems.
* Skills All employees are required to be proficient in the use of Microsoft Windows and Office environments
* TRAVEL: Ability to travel up to 30% worst case (10% worst case with last couple of years of projects).
* PHYSICAL DEMANDS OF POSITION: Seeing, color perception, hearing, listening, clear speech, dexterity in hands, driving, lifting, climbing, ability to mount and dismount equipment, pushing, and pulling.
* WORKING ENVIRONMENT/CONDITIONS: Expected to be on client location 5 days a week, Standard office environment, On-site office environment, and diverse industrial/construction environments. Frequent PC usage, copy machines, phones.
Required Skills:
- Analysis
- Mitigation
- Protection
- Codes
- Calculations
- Load
- Electrical Engineering
- Salary
- Risk Assessment
- Scratch
- Compensation
- Travel
- Reliability
- Government
- Components
- Commissioning
- AutoCAD
- Problem Solving
- Specifications
- Programming
- Integration
- Construction
- Windows
- Education
- Software
- Planning
- Maintenance
- Design
- Engineering
Salary Package:
$ 111,000.00 - 120,000.00 (US Dollar)
JOB DESCRIPTION:
We have a Controls Engineer position open in Orlando, FL. This position is responsible for electrical/controls engineering on large-scale projects. Project requirements involve control system design from scratch (hardware/software/network), electrical panel design and power calculations, risk assessment, component selection and configuration, control system programming, and control system installation/commissioning.
Compensation info: The salary is around $125K base for 5 years of control system design experience. Salary would go up depending on years of experience.
RESPONSIBILITIES:
* Responsible for system design from blank sheet of paper to create concept of electrical/control components based on project requirements.
* Experience doing design via drafting software (AutoCAD preferred)
* Provide input, and system modification as needed, for system integration with other project disciplines
* Able to interface with facility design to optimize panel location minimizing voltage drop and designing a more efficient system hardware layout
* Manage vendor scope to verify safety, functionality, and all contract requirements are satisfied
* Ensures design complies with any local or government agency design/implementation codes in addition to client codes/standards
* Project technical risk assessment document generation and mitigation implementation
* Design and analysis for safety-critical parts within a control system
* Designing redundant mitigations in system to increase safety and reliability
* Designing systems with complex motion and integration from automated systems
* Develops documents of system configuration and design. Documents include Description of operation, Detailed control system design description, panel assembly drawings and schematics, termination drawings, network layout, system implementation/acceptance test plans, system routine maintenance/job plans
* Able to perform the following system design calculations/analysis: Short circuit protection, harmonics, noise reduction/cancellation, power consumption, load flow, short circuit protection, protective relay/circuit design, ground fault monitoring, safety system implementation (SIL/PL rating knowledge is preferred)
* Knowledge of ride system design for attractions involving guests is preferred
* Capable of working off shifts as needed during installation/commissioning to support project
QUALIFICATIONS:
* Must be organized, technically competent, have effective oral and written communications, experienced in working in a multi-disciplined environment and interfacing with engineers, designers, and drafters.
* Education Bachelors degree in electrical engineering. (Bachelors degrees in other disciplines may be acceptable if work experience is directly related to electrical engineering. Disciplines outside of the electrical/controls area will not be considered)
* Experience
* 5+ years of experience covering most responsibilities listed above. Preferred experience in ASTM standards, attractions industry, and safety engineering.
* Key Competencies
* Knowledge of contract documents and specifications. Ability to collect field data and accurately record findings.
* Ability to perform system design functions. Planning, Customer Focused, Timely Decision Making, Informing, Organizing, Priority Setting, Problem Solving.
* Experience working with hardware/software from one of the major industrial manufacturers (i.e. Allen-Bradly, Siemens, etc.).
* Experience with ethernet-based distributed remote I/O systems.
* Skills All employees are required to be proficient in the use of Microsoft Windows and Office environments
* TRAVEL: Ability to travel up to 30% worst case (10% worst case with last couple of years of projects).
* PHYSICAL DEMANDS OF POSITION: Seeing, color perception, hearing, listening, clear speech, dexterity in hands, driving, lifting, climbing, ability to mount and dismount equipment, pushing, and pulling.
* WORKING ENVIRONMENT/CONDITIONS: Expected to be on client location 5 days a week, Standard office environment, On-site office environment, and diverse industrial/construction environments. Frequent PC usage, copy machines, phones.
Required Skills:
- Analysis
- Mitigation
- Protection
- Codes
- Calculations
- Load
- Electrical Engineering
- Salary
- Risk Assessment
- Scratch
- Compensation
- Travel
- Reliability
- Government
- Components
- Commissioning
- AutoCAD
- Problem Solving
- Specifications
- Programming
- Integration
- Construction
- Windows
- Education
- Software
- Planning
- Maintenance
- Design
- Engineering
Salary Package:
$ 111,000.00 - 120,000.00 (US Dollar)