TTM Technologies
About TTM
TTM Technologies, Inc. is a leading global manufacturer of technology products, including mission systems, radio frequency ("RF") components, RF microwave/microelectronic assemblies, and technologically advanced printed circuit boards ("PCB"s). TTM stands for time-to-market, representing how TTM's time‑critical, one‑stop design, engineering and manufacturing services enable customers to reduce the time required to develop new products and bring them to market.
Additional information can be found at www.ttm.com
Scope The Final Inspector is accountable for preparing items for the shipping process to aid in process inspection of product after completion of processes. This position requires attention to detail, good communication skills, and the ability to read and comprehend technical requirements of the traveler and blueprint. This role will aid in other final inspection functions to establish compliance with order specifications and conformity.
Duties and Responsibilities
Measure, cut, and seal bags in preparation for shipping completed boards
Read, comprehend, and interpret travelers and drawings provided to assess requirements and special instructions required for jobs.
Have basic comprehension of IPC and military requirements. Must know where to go to obtain customer specific specifications.
Inspect product under magnifying tool for opens, shorts, contamination, solder mask/legend issues, etc.
Compare size and location of holes to verify conformance to specifications when assisting for first‑article measurements.
Perform any rework operations (solder mask touch‑up, remove burrs/rough spots, rework damaged areas, cover exposed copper areas with solder mask, clean and/or polish surface mount pads) that can be done inside the final inspection department.
Stamp mark of approval or rejection, or initials, on product or traveler.
Log job in and out of ERP system with accurate counts of product.
Record data and complete scrap report forms.
Stack finished boards with separator sheets for transfer to next work station.
Essential Knowledge and Skills
Ability to read, write, and communicate in English
Ability to read and comprehend technical requirements of the traveler and blueprint
Ability to visually verify fine detail work
Lift up to 40 pounds.
Ability to work in a face‑pace environment and have strong attention to details and able to switch between different circuit board programs.
Must be able to handle interruptions to work flow as necessary to accommodate engineering requests.
Great attention to detail
Ability to look at screen/scope for long periods of time
Education and Experience Education
High School diploma or equivalent preferred
Required Experience
Strong communication skills
Demonstrated experience in a role requiring technical aptitude
Preferred Experience
3+ years of manufacturing experience
Experience within the aerospace industry or AS9100 and OFAC helpful
Printed circuit board and quality experience a plus
Compensation and Benefits TTM offers a variety of health and well‑being benefit programs. Benefit options include medical, dental, vision, 401(k), flexible spending and health savings accounts, accident benefits, life insurance, disability benefits, paid vacation & holidays. Benefits are available on the 1st of the month following date of hire. For some positions, only PTO and holiday benefits are offered.
Compensation ranges for roles at TTM Technologies varies depending on a wide array of factors that are considered in making compensation decisions including but not limited to skill sets; experience and training; certifications; and other business and organizational needs. The disclosed range estimate has not been adjusted for the applicable geographic differential associated with the location at which the position may be filled. At TTM Technologies, it is not typical for an individual to be hired at or near the top of the range for their role and compensation decisions are dependent on each individual set of circumstances. A reasonable estimate of the current range is:
$48,524 - $76,699
Additional compensation: An annual or quarterly company bonus may apply based on position assignment. Positions hired for alternative shift may be eligible for a shift premium based on the assigned shift and location.
Export Statement Must comply with TTM Export Control Policies and Procedures and all applicable laws including ITAR, EAR and OFAC including but not limited to: a) being able to identify ITAR product on the manufacturing floor and understand that access to these products and related technical data is restricted to only US Citizens and US Permanent Residents; b) recognition of foreign persons visitors by badge differentiation; c) understand and follow authorization procedures for bringing foreign visitors into facilities (VAL); d) understand the Export and ITAR requirements for shipments leaving the US; e) manage vendor approvals for ITAR manufacturing and services.
All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, citizenship, disability or protected veteran status.
#J-18808-Ljbffr
Additional information can be found at www.ttm.com
Scope The Final Inspector is accountable for preparing items for the shipping process to aid in process inspection of product after completion of processes. This position requires attention to detail, good communication skills, and the ability to read and comprehend technical requirements of the traveler and blueprint. This role will aid in other final inspection functions to establish compliance with order specifications and conformity.
Duties and Responsibilities
Measure, cut, and seal bags in preparation for shipping completed boards
Read, comprehend, and interpret travelers and drawings provided to assess requirements and special instructions required for jobs.
Have basic comprehension of IPC and military requirements. Must know where to go to obtain customer specific specifications.
Inspect product under magnifying tool for opens, shorts, contamination, solder mask/legend issues, etc.
Compare size and location of holes to verify conformance to specifications when assisting for first‑article measurements.
Perform any rework operations (solder mask touch‑up, remove burrs/rough spots, rework damaged areas, cover exposed copper areas with solder mask, clean and/or polish surface mount pads) that can be done inside the final inspection department.
Stamp mark of approval or rejection, or initials, on product or traveler.
Log job in and out of ERP system with accurate counts of product.
Record data and complete scrap report forms.
Stack finished boards with separator sheets for transfer to next work station.
Essential Knowledge and Skills
Ability to read, write, and communicate in English
Ability to read and comprehend technical requirements of the traveler and blueprint
Ability to visually verify fine detail work
Lift up to 40 pounds.
Ability to work in a face‑pace environment and have strong attention to details and able to switch between different circuit board programs.
Must be able to handle interruptions to work flow as necessary to accommodate engineering requests.
Great attention to detail
Ability to look at screen/scope for long periods of time
Education and Experience Education
High School diploma or equivalent preferred
Required Experience
Strong communication skills
Demonstrated experience in a role requiring technical aptitude
Preferred Experience
3+ years of manufacturing experience
Experience within the aerospace industry or AS9100 and OFAC helpful
Printed circuit board and quality experience a plus
Compensation and Benefits TTM offers a variety of health and well‑being benefit programs. Benefit options include medical, dental, vision, 401(k), flexible spending and health savings accounts, accident benefits, life insurance, disability benefits, paid vacation & holidays. Benefits are available on the 1st of the month following date of hire. For some positions, only PTO and holiday benefits are offered.
Compensation ranges for roles at TTM Technologies varies depending on a wide array of factors that are considered in making compensation decisions including but not limited to skill sets; experience and training; certifications; and other business and organizational needs. The disclosed range estimate has not been adjusted for the applicable geographic differential associated with the location at which the position may be filled. At TTM Technologies, it is not typical for an individual to be hired at or near the top of the range for their role and compensation decisions are dependent on each individual set of circumstances. A reasonable estimate of the current range is:
$48,524 - $76,699
Additional compensation: An annual or quarterly company bonus may apply based on position assignment. Positions hired for alternative shift may be eligible for a shift premium based on the assigned shift and location.
Export Statement Must comply with TTM Export Control Policies and Procedures and all applicable laws including ITAR, EAR and OFAC including but not limited to: a) being able to identify ITAR product on the manufacturing floor and understand that access to these products and related technical data is restricted to only US Citizens and US Permanent Residents; b) recognition of foreign persons visitors by badge differentiation; c) understand and follow authorization procedures for bringing foreign visitors into facilities (VAL); d) understand the Export and ITAR requirements for shipments leaving the US; e) manage vendor approvals for ITAR manufacturing and services.
All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, citizenship, disability or protected veteran status.
#J-18808-Ljbffr