Axon Enterprise
Electrical Engineer II, Video Products - Sustaining (Onsite) Scottsdale, Arizona
Axon Enterprise, Scottsdale, Arizona, us, 85261
Location: Scottsdale, Arizona, United States
Join Axon and be a Force for Good. What You'll Do
Update in-market circuit designs to address component obsolescence, component changes, second-source requests, cost savings, and other post-launch design improvements for mass production electronics
Collaborate with cross functional engineering design teams, technology partners, and manufacturing teams to own electronics maintenance during the post launch lifecycle.
Execute bench verification and performance evaluation of components and circuits using laboratory tools such as oscilloscopes, spectrum analyzers, logic analyzers, power supplies, etc.
Perform debug, failure analysis, and rework of electronics systems, circuits, and components
Using OrCAD Schematic tools, improve or modify embedded high-density, high-speed mixed-signal electronic circuits that integrate a wide array of electronics: application processors, microcontrollers, image sensors, high- and low-speed data interfaces, high-speed memory, switch-mode and linear power supplies, batteries, audio subsystems, RF transceivers, discrete digital and analog components, PCBs and Flexible PCBs, and a lot more.
Team with PCB Design engineers to define, plan, implement, and inspect printed circuit board layout updates using Allegro or other layout tools
Test and evaluate basic RF performance of wireless circuitry (Cellular, Wifi, Bluetooth, GNSS, etc) in assigned in-market products
Map out test methods, perform system and component verification testing, and drive test plans for evaluating electronics design changes.
Assess and document design change outcomes, test results, and related information and present information to design teams and management.
Provide hardware support (sample preparation, documentation, debug) to the global regulatory compliance team for product certifications (FCC, IC, CE, PTCRB, etc)
Update, evaluate, and finalize Bill of Materials and other design documentation.
What You Bring
Bachelor's degree in Electrical Engineering or similar engineering discipline
Minimum 5 years of industry electronics design or electronics sustaining experience with mass-produced high-speed, high-density, portable, battery-powered devices, and/or low-power vehicular embedded electronics products.
Proficient with identifying and implementing alternate source electronic component solutions and/or circuit design changes necessary to address design improvement, obsolescence, supply chain easement, etc, of released mass production electronics.
Proficiency with general process of making design changes to Bills of Material (BOMs), schematics, layouts as needed for change requests.
Strong proficiency with basic discrete analog and digital circuit design (passive/active components, complex circuit analysis)
Demonstrated experience with component selection, circuit design, and verification testing in several of the following areas:
Power supplies (SMPS, LDO, other regulators), applications processors/microcontrollers, high speed memory subsystems (LPDDRx, eMMC), high- and low- speed communications interfaces (USB, Ethernet, I2C, SPI), audio components (digital and analog MEMs mics), RF subsystem components (Wifi, BT, LTE, GNSS), sensor systems, protection circuitry (ESD, voltage and current limiting components), SMT connectors, batteries and battery packs, PCBAs, Flex PCBAs, etc
Experience with High Speed circuit design and test (eg. USB3.x, Ethernet, RF, DDRx, etc)
Basic experience with RF integration and test (eg. Bluetooth, BLE, Wifi, GNSS, Cellular)
Strong hands‑on proficiency with electronics characterization, verification, debug, and failure analysis using laboratory tools: Oscilloscope, power supplies, multimeters, custom jigs, spectrum analyzer, etc
Schematic design proficiency using industry leading design tools, including BOM development. Experience with Cadence/OrCAD is desired.
Proficiency collaborating with PCB engineers to realize PCB design: layout inspection and optimization, and release to fabrication. Experience with Allegro Viewer a plus.
Experience with basic regulatory tests, test preparation, and debugging products to pass regulatory standards (FCC, CE, PTRCB, etc).
Proficiency creating test plans needed to verify EE component and circuit changes.
Independent contributor capable of working within cross-functional and geographically diverse engineering teams
Solid skills with documentation, analysis, and presentations tools, such as Word, Excel, PowerPoint
Benefits that Benefit You
Competitive salary and 401k with employer match
Discretionary paid time off
Paid parental leave for all
Fitness Programs
Emotional & Mental Wellness support
And more...
#LI-Onsite
Don't meet every single requirement? That's ok. At Axon, we Aim Far. We think big with a long-term view because we want to reinvent the world to be a safer, better place. We are also committed to building diverse teams that reflect the communities we serve.
Studies have shown that women and people of color are less likely to apply to jobs unless they check every box in the job description. If you’re excited about this role and our mission to Protect Life but your experience doesn’t align perfectly with every qualification listed here, we encourage you to apply anyways. You may be just the right candidate for this or other roles.
The above job description is not intended as, nor should it be construed as, exhaustive of all duties, responsibilities, skills, efforts, or working conditions associated with this job. The job description may change or be supplemented at any time in accordance with business needs and conditions.
Some roles may also require legal eligibility to work in a firearms environment.
Axon’s mission is to Protect Life and is committed to the well-being and safety of its employees as well as Axon’s impact on the environment. All Axon employees must be aware of and committed to the appropriate environmental, health, and safety regulations, policies, and procedures. Axon employees are empowered to report safety concerns as they arise and activities potentially impacting the environment.
We are an equal opportunity employer that promotes justice, advances equity, values diversity and fosters inclusion. We’re committed to hiring the best talent — regardless of race, creed, color, ancestry, religion, sex (including pregnancy), national origin, sexual orientation, age, citizenship status, marital status, disability, gender identity, genetic information, veteran status, or any other characteristic protected by applicable laws, regulations and ordinances — and empowering all of our employees so they can do their best work. If you have a disability or special need that requires assistance or accommodation during the application or the recruiting process, please email recruitingops@axon.com. Please note that this email address is for accommodation purposes only. Axon will not respond to inquiries for other purposes.
#J-18808-Ljbffr
Join Axon and be a Force for Good. What You'll Do
Update in-market circuit designs to address component obsolescence, component changes, second-source requests, cost savings, and other post-launch design improvements for mass production electronics
Collaborate with cross functional engineering design teams, technology partners, and manufacturing teams to own electronics maintenance during the post launch lifecycle.
Execute bench verification and performance evaluation of components and circuits using laboratory tools such as oscilloscopes, spectrum analyzers, logic analyzers, power supplies, etc.
Perform debug, failure analysis, and rework of electronics systems, circuits, and components
Using OrCAD Schematic tools, improve or modify embedded high-density, high-speed mixed-signal electronic circuits that integrate a wide array of electronics: application processors, microcontrollers, image sensors, high- and low-speed data interfaces, high-speed memory, switch-mode and linear power supplies, batteries, audio subsystems, RF transceivers, discrete digital and analog components, PCBs and Flexible PCBs, and a lot more.
Team with PCB Design engineers to define, plan, implement, and inspect printed circuit board layout updates using Allegro or other layout tools
Test and evaluate basic RF performance of wireless circuitry (Cellular, Wifi, Bluetooth, GNSS, etc) in assigned in-market products
Map out test methods, perform system and component verification testing, and drive test plans for evaluating electronics design changes.
Assess and document design change outcomes, test results, and related information and present information to design teams and management.
Provide hardware support (sample preparation, documentation, debug) to the global regulatory compliance team for product certifications (FCC, IC, CE, PTCRB, etc)
Update, evaluate, and finalize Bill of Materials and other design documentation.
What You Bring
Bachelor's degree in Electrical Engineering or similar engineering discipline
Minimum 5 years of industry electronics design or electronics sustaining experience with mass-produced high-speed, high-density, portable, battery-powered devices, and/or low-power vehicular embedded electronics products.
Proficient with identifying and implementing alternate source electronic component solutions and/or circuit design changes necessary to address design improvement, obsolescence, supply chain easement, etc, of released mass production electronics.
Proficiency with general process of making design changes to Bills of Material (BOMs), schematics, layouts as needed for change requests.
Strong proficiency with basic discrete analog and digital circuit design (passive/active components, complex circuit analysis)
Demonstrated experience with component selection, circuit design, and verification testing in several of the following areas:
Power supplies (SMPS, LDO, other regulators), applications processors/microcontrollers, high speed memory subsystems (LPDDRx, eMMC), high- and low- speed communications interfaces (USB, Ethernet, I2C, SPI), audio components (digital and analog MEMs mics), RF subsystem components (Wifi, BT, LTE, GNSS), sensor systems, protection circuitry (ESD, voltage and current limiting components), SMT connectors, batteries and battery packs, PCBAs, Flex PCBAs, etc
Experience with High Speed circuit design and test (eg. USB3.x, Ethernet, RF, DDRx, etc)
Basic experience with RF integration and test (eg. Bluetooth, BLE, Wifi, GNSS, Cellular)
Strong hands‑on proficiency with electronics characterization, verification, debug, and failure analysis using laboratory tools: Oscilloscope, power supplies, multimeters, custom jigs, spectrum analyzer, etc
Schematic design proficiency using industry leading design tools, including BOM development. Experience with Cadence/OrCAD is desired.
Proficiency collaborating with PCB engineers to realize PCB design: layout inspection and optimization, and release to fabrication. Experience with Allegro Viewer a plus.
Experience with basic regulatory tests, test preparation, and debugging products to pass regulatory standards (FCC, CE, PTRCB, etc).
Proficiency creating test plans needed to verify EE component and circuit changes.
Independent contributor capable of working within cross-functional and geographically diverse engineering teams
Solid skills with documentation, analysis, and presentations tools, such as Word, Excel, PowerPoint
Benefits that Benefit You
Competitive salary and 401k with employer match
Discretionary paid time off
Paid parental leave for all
Fitness Programs
Emotional & Mental Wellness support
And more...
#LI-Onsite
Don't meet every single requirement? That's ok. At Axon, we Aim Far. We think big with a long-term view because we want to reinvent the world to be a safer, better place. We are also committed to building diverse teams that reflect the communities we serve.
Studies have shown that women and people of color are less likely to apply to jobs unless they check every box in the job description. If you’re excited about this role and our mission to Protect Life but your experience doesn’t align perfectly with every qualification listed here, we encourage you to apply anyways. You may be just the right candidate for this or other roles.
The above job description is not intended as, nor should it be construed as, exhaustive of all duties, responsibilities, skills, efforts, or working conditions associated with this job. The job description may change or be supplemented at any time in accordance with business needs and conditions.
Some roles may also require legal eligibility to work in a firearms environment.
Axon’s mission is to Protect Life and is committed to the well-being and safety of its employees as well as Axon’s impact on the environment. All Axon employees must be aware of and committed to the appropriate environmental, health, and safety regulations, policies, and procedures. Axon employees are empowered to report safety concerns as they arise and activities potentially impacting the environment.
We are an equal opportunity employer that promotes justice, advances equity, values diversity and fosters inclusion. We’re committed to hiring the best talent — regardless of race, creed, color, ancestry, religion, sex (including pregnancy), national origin, sexual orientation, age, citizenship status, marital status, disability, gender identity, genetic information, veteran status, or any other characteristic protected by applicable laws, regulations and ordinances — and empowering all of our employees so they can do their best work. If you have a disability or special need that requires assistance or accommodation during the application or the recruiting process, please email recruitingops@axon.com. Please note that this email address is for accommodation purposes only. Axon will not respond to inquiries for other purposes.
#J-18808-Ljbffr