Real Time Consulting, LLC
Sr Advanced Manufacturing Engineer
Real Time Consulting, LLC, Minneapolis, Minnesota, United States, 55488
REAL TIME CONSULTING (An RTCo Company)-POSITION DESCRIPTION
JOB TITLE: Sr Advanced Manufacturing Engineer
ABOUT THE JOB: Be part of a team develops new or modifies processes, defines process equipment requirements and specifications, and reviews processing techniques and methods applied in the manufacture, fabrication, and evaluation of Ring Laser Gyroscopes.
In this position, you will influence the planning and designing of product manufacturing processes. You will determine the equipment and tools needed by the team to achieve manufacturing goals according to product specification for both existing and new processes. You will maximize efficiency by analyzing the layout of equipment, workflow, assembly methods, and work force utilization. Support daily production activities and drive producibility improvement projects for our existing products in a dynamic environment.
RESPONSIBILITIES:
Provide test and manufacturing support for Ring Laser Gyro (RLG) and Tactical Guidance Products (TGP) production. Perform yield and performance data analysis to monitor process capability, product health trends and drive yield improvements. Utilize CAMP, Lean, and Six-Sigma methodologies to govern engineering standard work practices. Investigate and resolve technical issues, facilitate issue identification and analysis. Develop improvements in product design and in the manufacturing and assembly processes for cost and cycle time reductions. Assist development of new products. Support knowledge for test equipment and preventative maintenance plans to maintain factory capacity and efficient product flow. Facilitate a self-driven work force culture to achieve RTY, BIQ, COPQ, and other SQDIC goals. Test products & software
REQUIRED SKILLS:
Bachelor's degree from an accredited institution in a technical discipline, such as Engineering, Physics, or Mathematics 5+ years Product or Process Engineering experience Experience in Manufacturing Products for Regulated Industries (ex. Aerospace, Medical, Automotive) Experience with Optics, Sensors, and/or Electronic Assemblies Product Assembly and Test experience Experience with Product Yield Management and Improvement. Experience with Programming and Troubleshooting Equipment with PLC Controllers Root Cause Corrective Action / Lean / Six Sigma experience Ability to Work in a Cleanroom Environment Ability to Balance Priorities in Daily Tasks and Strategic Projects Possessed a Hands-on Work Ethic; Takes Initiative and Ownership of Responsibilities and Actions Ability to Partner and Collaborate Well with Cross-functional Team Members Ability to Quickly and Accurately Identify Subtle Interrelationships and Patterns Among a Variety of Problems and Issues (Process and Data Correlation of Cause/Effect Across Value Stream) Ability to Convey Information with Clarity and Directness, Ensuring the Message is Understood Across Diverse Teams
ABOUT THE COMPANY: Real Time Consulting (RTC) exists to partner outstanding engineering talent to support our clients' success. Unsurpassed service is delivered to our clients by upholding responsibility, teamwork and quality. Our primary commitment is to help our clients. Since 1997, RTC has been protecting and enhancing lives with safe, reliable, innovative solutions, providing full life-cycle design, development and testing of EMBEDDED ENGINEERING SYSTEMS and SOFTWARE SOLUTIONS with Program Management and Consulting Services. Our employees average 20+ years of versatile and accomplished expertise to our clients, driving continuous innovation forward. Employee's innovative and analytical ideas are cultivated while maintaining the big picture vision in a fast-paced, changing environment. Our corporate values are to Uphold Responsibility, Support People, Promote Teamwork and Deliver Quality!
This position may require exposure to software, source code or technology that is subject to US export control laws and regulations (i.e., International Traffic in Arms Regulations or the Export Administration Regulations). To comply with these requirements, you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Departments of State or Commerce, as applicable.
RTCo is an Equal Opportunity Employer; employment with RTCo is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.
To qualify for all positions with Real Time Companies, applicants must be legally authorized to work in the United States and should not require now, or in the future, sponsorship for employment visa status. Please be aware that Real Time Companies does not sponsor employment-based visas. Additionally, certain positions with Real Time Companies that involve work with government entities may have more restrictive employment status requirements, such as U.S. citizenship, based on security clearance requirements or other governmental requirements. Real Time Companies is an Equal Opportunity Employer M/F/D/V.
ABOUT THE JOB: Be part of a team develops new or modifies processes, defines process equipment requirements and specifications, and reviews processing techniques and methods applied in the manufacture, fabrication, and evaluation of Ring Laser Gyroscopes.
In this position, you will influence the planning and designing of product manufacturing processes. You will determine the equipment and tools needed by the team to achieve manufacturing goals according to product specification for both existing and new processes. You will maximize efficiency by analyzing the layout of equipment, workflow, assembly methods, and work force utilization. Support daily production activities and drive producibility improvement projects for our existing products in a dynamic environment.
RESPONSIBILITIES:
Provide test and manufacturing support for Ring Laser Gyro (RLG) and Tactical Guidance Products (TGP) production. Perform yield and performance data analysis to monitor process capability, product health trends and drive yield improvements. Utilize CAMP, Lean, and Six-Sigma methodologies to govern engineering standard work practices. Investigate and resolve technical issues, facilitate issue identification and analysis. Develop improvements in product design and in the manufacturing and assembly processes for cost and cycle time reductions. Assist development of new products. Support knowledge for test equipment and preventative maintenance plans to maintain factory capacity and efficient product flow. Facilitate a self-driven work force culture to achieve RTY, BIQ, COPQ, and other SQDIC goals. Test products & software
REQUIRED SKILLS:
Bachelor's degree from an accredited institution in a technical discipline, such as Engineering, Physics, or Mathematics 5+ years Product or Process Engineering experience Experience in Manufacturing Products for Regulated Industries (ex. Aerospace, Medical, Automotive) Experience with Optics, Sensors, and/or Electronic Assemblies Product Assembly and Test experience Experience with Product Yield Management and Improvement. Experience with Programming and Troubleshooting Equipment with PLC Controllers Root Cause Corrective Action / Lean / Six Sigma experience Ability to Work in a Cleanroom Environment Ability to Balance Priorities in Daily Tasks and Strategic Projects Possessed a Hands-on Work Ethic; Takes Initiative and Ownership of Responsibilities and Actions Ability to Partner and Collaborate Well with Cross-functional Team Members Ability to Quickly and Accurately Identify Subtle Interrelationships and Patterns Among a Variety of Problems and Issues (Process and Data Correlation of Cause/Effect Across Value Stream) Ability to Convey Information with Clarity and Directness, Ensuring the Message is Understood Across Diverse Teams
ABOUT THE COMPANY: Real Time Consulting (RTC) exists to partner outstanding engineering talent to support our clients' success. Unsurpassed service is delivered to our clients by upholding responsibility, teamwork and quality. Our primary commitment is to help our clients. Since 1997, RTC has been protecting and enhancing lives with safe, reliable, innovative solutions, providing full life-cycle design, development and testing of EMBEDDED ENGINEERING SYSTEMS and SOFTWARE SOLUTIONS with Program Management and Consulting Services. Our employees average 20+ years of versatile and accomplished expertise to our clients, driving continuous innovation forward. Employee's innovative and analytical ideas are cultivated while maintaining the big picture vision in a fast-paced, changing environment. Our corporate values are to Uphold Responsibility, Support People, Promote Teamwork and Deliver Quality!
This position may require exposure to software, source code or technology that is subject to US export control laws and regulations (i.e., International Traffic in Arms Regulations or the Export Administration Regulations). To comply with these requirements, you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Departments of State or Commerce, as applicable.
RTCo is an Equal Opportunity Employer; employment with RTCo is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.
To qualify for all positions with Real Time Companies, applicants must be legally authorized to work in the United States and should not require now, or in the future, sponsorship for employment visa status. Please be aware that Real Time Companies does not sponsor employment-based visas. Additionally, certain positions with Real Time Companies that involve work with government entities may have more restrictive employment status requirements, such as U.S. citizenship, based on security clearance requirements or other governmental requirements. Real Time Companies is an Equal Opportunity Employer M/F/D/V.