Johnson, Mirmiran, and Thompson Inc.
Johnson, Mirmiran & Thompson is a dynamic, 100% employee-owned consulting firm of more than 2,400 professionals that provides a full range of multi-disciplined engineering, architecture, information technology, and related services to public agencies and private clients throughout the United States. JMT, is currently ranked #50 on Engineering News-Record’s list of the Top 500 Design Firms.
JMT is seeking a CEI Senior Inspector/Senior Engineer Intern for the West Palm Beach, Florida area. The successful candidate will be responsible for performing highly complex technical assignments in field surveying and construction layout, making, and checking engineering computations, inspecting construction work, and conducting field tests and is responsible for coordinating and managing the lower-level inspectors. They will also apply standard inspection procedures to ongoing activities during and after construction for structural quality, general safety and conformance to plans, specifications and codes. This position is not eligible for employer based sponsorship with the exception of the TN visa classification.
Essential Functions and Responsibilities
Review and interpret plans, site layouts, specifications and construction methods to ensure compliance to legal requirements and safety regulations
Performs routine tests on concrete, soils and other materials
Measure dimensions and verify level, alignment, and elevation of structures, fixtures, grades and/or pavement to ensure compliance to plans and codes
Coordinate and supervise project inspection activities to ensure contractor compliance of plans, contract documents, specifications and standards
Assign, schedule and maintain subordinate inspection staff throughout all phases of the project
Work on behalf of the Client to draft project correspondence, facilitate project meetings, and resolve construction related field issues
Gathers and maintains record documents
Makes field notes and computations
Interact with the general public, government agencies, contractors, sub-contractors, and other internal and external parties to respond to inquiries
Nonessential Functions and Responsibilities
Perform other related duties as assigned
Required Skills
Strong computer proficiency
Must successfully complete and pass JMT's Motor Vehicle screening
Required Experience
High school graduate or equivalent
Four (4) years of Construction Inspection Experience (CEI) experience in roadway or bridge construction
Client requested certifications
Active driver’s license
Experience Preferred
Associates or bachelor’s degree in Construction Management or Civil Engineering
Supervisory experience in construction management/inspection situations
Ability to act in an Owner’s Agent/Responsible in Charge role
Qualifications / Certifications
Must have the following as required by the scope of work for the intended assignment on the project at the time of NTP:
CTQP Final Estimates Level I
CTQP Concrete Field Technician Level I
CTQP Concrete Field Inspector Level II (Bridges)
CTQP Asphalt Roadway Level I
CTQP Asphalt Roadway Level II
CTQP Earthwork Construction Inspection Level I
CTQP Earthwork Construction Inspection Level II
CTQP Pile Driving Inspection
CTQP Drilled Shaft Inspection
Required for inspection of all drilled shafts including miscellaneous structures such as sign structures, lighting structures, and traffic signal structure foundations
FDOT Intermediate MOT
IMSA Traffic Signal Inspector Level I
Nuclear Radiation Safety
Florida Stormwater, Erosion, and Sedimentation Control Training and Certification Program for Inspectors and Contractors
Recommended when the scope of the project includes concrete pavement, grinding concrete pavement, or concrete pavement slab replacement. Courses are available from the Transportation Curriculum Coordination Council (TC3).
PCC Paving Inspection (TC3CN004-15-T1)
Diamond Grinding and Grooving (TC3MN009-15-T1)
Curing, Sawing and Joint Sealing (TC3CN032-16-T1)
Abilities / Responsibilities
Ability to: Communicate effectively in English (verbally and in writing)
Responsible for: Performing highly complex technical assignments in field surveying and construction layout, marking, and checking engineering computations, inspecting construction work, and conducting field tests
Responsible for: Coordinating and managing the lower level inspectors
Responsible for: Performing work under the general supervision of the Project Administrator
Working Conditions
Work is performed in the field. Ability to extensively perform bending, kneeling, standing, shoveling, and lifting and carrying objects weighing up to 25 lbs as needed. Work may be conducted outside in heat/cold, wet/humid, and dry/arid conditions.
Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status or any other characteristic protected by state or federal law.
#LI-JP2
JMT is seeking a CEI Senior Inspector/Senior Engineer Intern for the West Palm Beach, Florida area. The successful candidate will be responsible for performing highly complex technical assignments in field surveying and construction layout, making, and checking engineering computations, inspecting construction work, and conducting field tests and is responsible for coordinating and managing the lower-level inspectors. They will also apply standard inspection procedures to ongoing activities during and after construction for structural quality, general safety and conformance to plans, specifications and codes. This position is not eligible for employer based sponsorship with the exception of the TN visa classification.
Essential Functions and Responsibilities
Review and interpret plans, site layouts, specifications and construction methods to ensure compliance to legal requirements and safety regulations
Performs routine tests on concrete, soils and other materials
Measure dimensions and verify level, alignment, and elevation of structures, fixtures, grades and/or pavement to ensure compliance to plans and codes
Coordinate and supervise project inspection activities to ensure contractor compliance of plans, contract documents, specifications and standards
Assign, schedule and maintain subordinate inspection staff throughout all phases of the project
Work on behalf of the Client to draft project correspondence, facilitate project meetings, and resolve construction related field issues
Gathers and maintains record documents
Makes field notes and computations
Interact with the general public, government agencies, contractors, sub-contractors, and other internal and external parties to respond to inquiries
Nonessential Functions and Responsibilities
Perform other related duties as assigned
Required Skills
Strong computer proficiency
Must successfully complete and pass JMT's Motor Vehicle screening
Required Experience
High school graduate or equivalent
Four (4) years of Construction Inspection Experience (CEI) experience in roadway or bridge construction
Client requested certifications
Active driver’s license
Experience Preferred
Associates or bachelor’s degree in Construction Management or Civil Engineering
Supervisory experience in construction management/inspection situations
Ability to act in an Owner’s Agent/Responsible in Charge role
Qualifications / Certifications
Must have the following as required by the scope of work for the intended assignment on the project at the time of NTP:
CTQP Final Estimates Level I
CTQP Concrete Field Technician Level I
CTQP Concrete Field Inspector Level II (Bridges)
CTQP Asphalt Roadway Level I
CTQP Asphalt Roadway Level II
CTQP Earthwork Construction Inspection Level I
CTQP Earthwork Construction Inspection Level II
CTQP Pile Driving Inspection
CTQP Drilled Shaft Inspection
Required for inspection of all drilled shafts including miscellaneous structures such as sign structures, lighting structures, and traffic signal structure foundations
FDOT Intermediate MOT
IMSA Traffic Signal Inspector Level I
Nuclear Radiation Safety
Florida Stormwater, Erosion, and Sedimentation Control Training and Certification Program for Inspectors and Contractors
Recommended when the scope of the project includes concrete pavement, grinding concrete pavement, or concrete pavement slab replacement. Courses are available from the Transportation Curriculum Coordination Council (TC3).
PCC Paving Inspection (TC3CN004-15-T1)
Diamond Grinding and Grooving (TC3MN009-15-T1)
Curing, Sawing and Joint Sealing (TC3CN032-16-T1)
Abilities / Responsibilities
Ability to: Communicate effectively in English (verbally and in writing)
Responsible for: Performing highly complex technical assignments in field surveying and construction layout, marking, and checking engineering computations, inspecting construction work, and conducting field tests
Responsible for: Coordinating and managing the lower level inspectors
Responsible for: Performing work under the general supervision of the Project Administrator
Working Conditions
Work is performed in the field. Ability to extensively perform bending, kneeling, standing, shoveling, and lifting and carrying objects weighing up to 25 lbs as needed. Work may be conducted outside in heat/cold, wet/humid, and dry/arid conditions.
Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status or any other characteristic protected by state or federal law.
#LI-JP2