Aerotek
Maintenance Mechanic
We are seeking a highly skilled Welder/Fabricator
Maintenance Technician to support our facility's operational readiness by performing a wide range of welding, fabrication, mechanical, electrical, and general maintenance tasks. This role is responsible for fabricating metal components, troubleshooting and repairing equipment, and supporting the overall upkeep of systems, facilities, and utilities. Responsibilities
Perform welding(sanitary welding preferred) and fabrication on parts, structural components, and production equipment (MIG, TIG, Stick preferred). Conduct preventive maintenance inspections, calibrations, and service on machinery, pumps, motors, HVAC systems, and facility infrastructure. Rebuild and clean production equipment including pumps, mixers, and other mechanical systems. Perform minor electrical tasks such as installing outlets, switches, lights, and basic troubleshooting. Execute plumbing work including copper pipe installation, threading, soldering, and fixture repairs. Accurately enter and close work orders in the CMMS (Computerized Maintenance Management System); input equipment and PM data. Maintain compliance with all FDA, SQF, OSHA, and company policies and safety regulations. Complete maintenance documentation and equipment logbooks thoroughly and accurately. Maintain a clean and organized work area; follow all SOPs and safety procedures. Operate forklifts, scissor lifts, and floor cleaning equipment as needed. Work independently or collaboratively depending on task complexity; perform other duties as assigned by the Supervisor. Essential Skills
Experience with welding using MIG, TIG, and stick.(Sanitary welding experience preferred) Proficient in troubleshooting, preventive maintenance, and repair work on production equipment and HVAC systems. Ability to document work through CMMS. Experience with electrical and plumbing tasks. Additional Skills & Qualifications
Vocational/technical training in mechanical, electrical, or plumbing trades preferred. 2+ years of hands-on maintenance experience in an industrial or manufacturing environment. Experience with pumps, mixers, motors, and basic electrical work. Proficiency in plumbing tasks and tools, including copper lines, ProPress, and threading. Knowledge of welding and HVAC systems; experience in lean manufacturing a plus. Familiarity with CMMS and preventive maintenance procedures. Basic computer skills required. Proficient in the use of hand & power tools. Ability to handle physical workload and lift up to 50lbs. Why Work Here?
Our organization offers a dynamic and collaborative work environment where your skills and expertise will be highly valued. We are committed to providing opportunities for professional growth and development. Join a team that prioritizes safety, innovation, and quality in all aspects of its operations. Work Environment
The employee occasionally works near moving mechanical parts, precarious places and is occasionally exposed to risk of electrical shock. The noise level in the work environment is usually moderate to loud. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Job Type & Location
This is a Contract to Hire position based out of Carteret, New Jersey. Pay and Benefits
The pay range for this position is $30.00 - $35.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: Medical, dental & vision
Critical Illness, Accident, and Hospital
401(k) Retirement Plan
Pre-tax and Roth post-tax contributions available
Life Insurance (Voluntary Life & AD&D for the employee and dependents)
Short and long-term disability
Health Spending Account (HSA)
Transportation benefits
Employee Assistance Program
Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type
This is a fully onsite position in Carteret,NJ. Application Deadline
This position is anticipated to close on Aug 21, 2025.
We are seeking a highly skilled Welder/Fabricator
Maintenance Technician to support our facility's operational readiness by performing a wide range of welding, fabrication, mechanical, electrical, and general maintenance tasks. This role is responsible for fabricating metal components, troubleshooting and repairing equipment, and supporting the overall upkeep of systems, facilities, and utilities. Responsibilities
Perform welding(sanitary welding preferred) and fabrication on parts, structural components, and production equipment (MIG, TIG, Stick preferred). Conduct preventive maintenance inspections, calibrations, and service on machinery, pumps, motors, HVAC systems, and facility infrastructure. Rebuild and clean production equipment including pumps, mixers, and other mechanical systems. Perform minor electrical tasks such as installing outlets, switches, lights, and basic troubleshooting. Execute plumbing work including copper pipe installation, threading, soldering, and fixture repairs. Accurately enter and close work orders in the CMMS (Computerized Maintenance Management System); input equipment and PM data. Maintain compliance with all FDA, SQF, OSHA, and company policies and safety regulations. Complete maintenance documentation and equipment logbooks thoroughly and accurately. Maintain a clean and organized work area; follow all SOPs and safety procedures. Operate forklifts, scissor lifts, and floor cleaning equipment as needed. Work independently or collaboratively depending on task complexity; perform other duties as assigned by the Supervisor. Essential Skills
Experience with welding using MIG, TIG, and stick.(Sanitary welding experience preferred) Proficient in troubleshooting, preventive maintenance, and repair work on production equipment and HVAC systems. Ability to document work through CMMS. Experience with electrical and plumbing tasks. Additional Skills & Qualifications
Vocational/technical training in mechanical, electrical, or plumbing trades preferred. 2+ years of hands-on maintenance experience in an industrial or manufacturing environment. Experience with pumps, mixers, motors, and basic electrical work. Proficiency in plumbing tasks and tools, including copper lines, ProPress, and threading. Knowledge of welding and HVAC systems; experience in lean manufacturing a plus. Familiarity with CMMS and preventive maintenance procedures. Basic computer skills required. Proficient in the use of hand & power tools. Ability to handle physical workload and lift up to 50lbs. Why Work Here?
Our organization offers a dynamic and collaborative work environment where your skills and expertise will be highly valued. We are committed to providing opportunities for professional growth and development. Join a team that prioritizes safety, innovation, and quality in all aspects of its operations. Work Environment
The employee occasionally works near moving mechanical parts, precarious places and is occasionally exposed to risk of electrical shock. The noise level in the work environment is usually moderate to loud. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Job Type & Location
This is a Contract to Hire position based out of Carteret, New Jersey. Pay and Benefits
The pay range for this position is $30.00 - $35.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: Medical, dental & vision
Critical Illness, Accident, and Hospital
401(k) Retirement Plan
Pre-tax and Roth post-tax contributions available
Life Insurance (Voluntary Life & AD&D for the employee and dependents)
Short and long-term disability
Health Spending Account (HSA)
Transportation benefits
Employee Assistance Program
Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type
This is a fully onsite position in Carteret,NJ. Application Deadline
This position is anticipated to close on Aug 21, 2025.