Abacus
Description:
Responsible for performing engineering assignments of a complex nature requiring application of engineering skills. Assignments involve planning and organizing projects and the application of highly specialized knowledge in carrying out the work. Provides technical support to lower level professionals. Typically requires 8 plus years of experience and a B.S. in Engineering. Professional Engineering certification strongly preferred. Enable Skills-Based Hiring No Furlough Notification ll NextEra Energy Contingent Workforce Program (CWP) assignments are eligible for worker furlough. Typical furlough schedules coincide with select national holidays, but may be subject to change. Suppliers will be notified by the CWP of those workers impacted and the applicable furlough dates prior to each furlough period. Worker Building Location JB - Juno Beach Office - 0000103492 Will driving be required as part of position duties/work? Yes Driving Record Validation For all positions indicating driving requirements, supplier must hold validation of non-restricted current driver''s license and demonstrate the following: no alcohol/drug related driving offenses within the previous five years and/or the license is not currently suspended or restricted related to hours of driving or reason for driving. Additional Job Details Position:
Hitachi Network Manager Energy Management System EMS (Owner's Representative)
Work on behalf of one of the world's largest renewable energy developer and builder as Hitachi Network Manager Energy Management System (EMS) Engineer ensuring reliable, secure, and efficient operation of transmission-level SCADA and EMS applications during commissioning.
Location: Remote with frequent trips to Juni Beach Fl.
Position Specific Description Experience in related Hitachi Network Manager Energy Management System EMS and Supervisory Control and Data Acquisition (SCADA) in energy projects. Excellent project management, communication, analytical and problem-solving skills. 1+ Years' experience with Hitachi Network Manager Energy Management System EMS, experience with renewable SCADA system and commissioning of SCADA in Power Plants is preferred.
Job Overview This position is responsible for the overall management of the team and assigned projects, to ensure compliance within required budgetary, scheduling, and safety goals. Employees in this role coordinate and manage construction work performed by contractors and/or vendors at the project site. Employees in this role manage the engineering, procurement and construction oversight-activities necessary to develop, license/permit, erect, start-up, and commence commercial operations.
Job Duties & Responsibilities • Works collaboratively with resources in various disciplines to determine project priorities and work plans • Meets corporate objectives with limited project management, scheduling and estimating resources • Manages department resources to provide effective early-stage project development support • Ensures projects are efficiently, effectively and safely implemented in accordance with department procedures and policies • Configure, maintain, and troubleshoot Hitachi Network Manager EMS applications and real-time databases. • Manage SCADA/telemetry integration (RTUs, ICCP links) and ensure data quality for real-time operations. • Support network model build and maintenance, including topology processing and connectivity validation. • Perform SE/CA/OPF tuning and validation to ensure system reliability and compliance. • Develop and maintain operator displays and PSE (Power System Explorer) visualization tools. • Execute system upgrades, patches, and failover testing in high-availability environments. • Ensure compliance with NERC CIP and internal cybersecurity standards. • Performs other job-related duties as assigned Preferred Qualifications • Bachelor's degree in Engineering, Computer Science, or related field. • 1+ years of experience with EMS platforms (Hitachi Network Manager EMS preferred; Client e-terra or Siemens Spectrum experience acceptable). • Strong understanding of power system operations, SCADA, and EMS applications (SE, CA, OPF). • Hands-on experience with network modeling, telemetry mapping, and database management. • Familiarity with ICCP/TASE.2, RTU protocols (DNP3, IEC 60870-5), and EMS front-end processors. • Knowledge of cybersecurity practices and compliance frameworks (e.g., NERC CIP). • Proficiency in scripting (PowerShell, Python) for automation and bulk data management. • knowledge of process control commissioning and troubleshooting. • Ability to understand electrical schematics and drawings. • Review drawings packages and OEM specifications versus installed equipment to confirm it meets design and manufacturer standards. • Ability to understand SCADA and communication schematics and drawings. • Knowledge of automation protocols (Modbus, DNP3, CAN, OPC, EtherNet/IP and others) • Third party firm management • Schedule and planning understanding • Strong analytical skills, problem-solving • Interface with other projects stakeholder as required Physical Requirements / Working Environment Ability to lift up to 20 pounds frequently on a daily basis. Standing on Will Per Diem and Mob/De-Mob expense types be available for this requisition? No If Per Diem is available, please indicate the maximum amount: n If Nuclear Business Unit: On-Boarding Note Nuclear workers requiring unescorted badge access will follow onsite in-processing procedures. All others will be required to complete Non-Nuclear pre-assignment screenings through their staffing supplier. Please contact CWP with any questions: cwp@nexteraenergy.com or 561-694-4761. Will the selected worker require unescorted badge access into Nuclear protected areas? No Is NERC CIP unescorted physical or cyber access required for this assignment? No Which NERC access is needed? N/ Is Federal Energy Regulatory Commission access required? No Shift Type Standard Shift (8-5) Hours per Day 8 Hours per Week 40 Total Hours 2,096.00 Attachment 1:
Job Description - Power Electronics/Inverter Engineer Position: We are seeking a highly skilled Power Electronics/Inverter engineer Subject Matter Expert (SME) to join our utility-scale renewable energy team. This role is critical to ensuring successful commissioning, testing, and operational readiness of utility-scale inverter systems for solar, battery energy storage (BESS), and hybrid renewable energy projects. The ideal candidate will combine deep technical expertise in power electronics with hands-on commissioning experience and strong project management capabilities. Come to work on behalf of one of the world's largest renewable energy developer and builder as Power Electronics/Inverter engineer ensuring reliable, secure, and efficient operation of transmission-level SCADA and inverter applications during commissioning.
Location: Remote with frequent trips to Juno Beach Fl.
Job Duties & Responsibilities • Lead factory integration testing (FIT) for utility-scale inverters (1MW+ capacity) ensuring comprehensive pre-deployment validation • Execute and support site acceptance testing (SAT) including functional, performance, and grid compliance testing protocols • Perform comprehensive commissioning of inverter control systems and power electronics components • Manage inverter startup sequencing and initial energization procedures following safety protocols • Diagnose inverter faults and failures using proprietary OEM software tools and advanced diagnostic techniques • Coordinate and witness all required Power Purchase Agreement (PPA), Large Generator Interconnection Agreement (LGIA), and Original Equipment Manufacturer (OEM) testing until passing criteria are met prior to Commercial Operation Date (COD) • Develop and execute comprehensive test plans for grid compliance, performance validation, and safety verification • Ensure all testing meets utility standards, regulatory requirements, and NextEra Energy specifications • Document test results and provide detailed technical reports for regulatory and commercial stakeholders • Collaborate closely with SCADA teams to analyze inverter control systems and communication protocols • Review, create, and optimize inverter parameter models for various project types including commercial, industrial, and generation facilities • Support remote connectivity and monitoring system integration Provide technical expertise for SCADA HMI development and data point configuration • Develop and manage deployment procedures, quality control protocols, and warranty management processes • Proactively identify potential technical issues and implement corrective actions to prevent project delays • Coordinate with multiple stakeholders including OEMs, contractors, utilities, and internal teams • Manage project timelines and ensure deliverable quality meets NextEra Energy standards • Connect remotely to inverter software systems for diagnostics, parameter adjustments, and performance optimization • Provide remote technical support during commissioning and operational phases • Develop and maintain remote access protocols and cybersecurity compliance procedures
Preferred Qualifications • Bachelor's degree in Electrical Engineering, Power Systems Engineering, or related technical field • 1+ years of experience in power electronics and utility-scale inverter systems • Experience with advanced inverter functions (volt-var control, frequency response, grid forming) • Strong understanding of power system operations, SCADA, and EMS applications (SE, CA, OPF). • Hands-on experience with network, telemetry mapping, and database management. • Familiarity with ICCP/TASE.2, RTU protocols. • Knowledge of cybersecurity practices and compliance frameworks (e.g., NERC CIP). • knowledge of process control commissioning and troubleshooting. • Ability to understand electrical schematics and drawings. • Review drawings packages and OEM specifications versus installed equipment to confirm it meets design and manufacturer standards. • Ability to understand SCADA and communication schematics and drawings. • Knowledge of automation protocols (Modbus, DNP3, CAN, OPC, EtherNet/IP and others) • Third party firm management • Schedule and planning understanding • Strong analytical skills, problem-solving • Interface with other projects stakeholder.
Physical Requirements / Working Environment Ability to lift up to 20 pounds frequently on a daily basis. Standing on feet for extended periods of time. Ability to work at desk position in front of a computer monitor for extensive periods of time. Ability to operate a motor vehicle for purposes of commuting between 2 working locations. Ability to travel as required.
Attachment 2: Job Description - PLC Programmer SCADA Subject Matter Expert (SME)
Position: NextEra Energy is seeking an experienced PLC Programmer SCADA Subject Matter Expert (SME) to support our rapidly expanding Battery Energy Storage System (BESS) and renewable energy portfolio. This role will provide expert-level PLC programming and SCADA integration support for utility-scale projects, ensuring seamless commissioning and operational excellence.
Key Responsibilities
PLC Programming & Development Expert-level PLC programming for BESS and solar projects using Schneider M340/M580 platforms Develop, modify, and optimize control logic for utility-scale energy storage systems Create and maintain standardized PLC code libraries and templates Implement advanced control algorithms for hybrid PV-BESS operations SCADA Integration & Communications
Configure and troubleshoot Modbus communications between PLCs, inverters, and SCADA systems Integrate PLCs with Ignition HMI platforms and historian systems Establish robust communication protocols for real-time monitoring and control Support OPC server configuration and data exchange protocols Testing & Commissioning Support
Lead Factory Acceptance Testing (FAT) and Site Acceptance Testing (SAT) procedures Perform comprehensive PLC code validation and system integration testing Support commissioning teams with on-site troubleshooting and system optimization Execute Power Purchase Agreement (PPA) and Large Generator Interconnection Agreement (LGIA) testing requirements Technical Leadership & Collaboration
Serve as technical SME for PLC programming standards and best practices Coordinate with SCADA leads, project managers, and vendor teams Provide technical guidance for control system architecture decisions Documentation & Standards
Develop and maintain PLC programming documentation and procedures Create detailed Functional Requirements Documents (FRDs) for control systems Establish coding standards and version control protocols Support regulatory compliance documentation (NERC CIP, cybersecurity
Location:
Remote with frequent trips.
Preferred Qualifications
Bachelor's degree in electrical engineering, Computer Engineering, or related field 5+ years of experience in PLC programming, preferably Schneider Electric platforms Expert knowledge of Modbus, DNP3, and industrial communication protocols Experience with Ignition SCADA platform and HMI development Strong understanding of power systems and utility-scale energy project Proven experience in utility-scale renewable energy or power generation projects Knowledge of BESS control systems, inverters, and energy storage technologies Familiarity with grid interconnection requirements and utility standards Experience with FAT/SAT testing procedures and commissioning protocols Full accountability for PPA, LGIA, and OEM testing completion Ability to travel up to 25% for project commissioning support Strong analytical and troubleshooting skills Excellent communication and documentation abilities NERC CIP cybersecurity awareness preferred
Physical Requirements / Working Environment
Ability to lift up to 20 pounds frequently on a daily basis. Standing on feet for extended periods of time. Ability to work at desk position in front of a computer monitor for extensive periods of time. Ability to operate a motor vehicle for purposes of commuting between 2 working locations. Ability to travel as required.
Location: Remote with frequent trips to Juni Beach Fl.
Position Specific Description Experience in related Hitachi Network Manager Energy Management System EMS and Supervisory Control and Data Acquisition (SCADA) in energy projects. Excellent project management, communication, analytical and problem-solving skills. 1+ Years' experience with Hitachi Network Manager Energy Management System EMS, experience with renewable SCADA system and commissioning of SCADA in Power Plants is preferred.
Job Overview This position is responsible for the overall management of the team and assigned projects, to ensure compliance within required budgetary, scheduling, and safety goals. Employees in this role coordinate and manage construction work performed by contractors and/or vendors at the project site. Employees in this role manage the engineering, procurement and construction oversight-activities necessary to develop, license/permit, erect, start-up, and commence commercial operations.
Job Duties & Responsibilities • Works collaboratively with resources in various disciplines to determine project priorities and work plans • Meets corporate objectives with limited project management, scheduling and estimating resources • Manages department resources to provide effective early-stage project development support • Ensures projects are efficiently, effectively and safely implemented in accordance with department procedures and policies • Configure, maintain, and troubleshoot Hitachi Network Manager EMS applications and real-time databases. • Manage SCADA/telemetry integration (RTUs, ICCP links) and ensure data quality for real-time operations. • Support network model build and maintenance, including topology processing and connectivity validation. • Perform SE/CA/OPF tuning and validation to ensure system reliability and compliance. • Develop and maintain operator displays and PSE (Power System Explorer) visualization tools. • Execute system upgrades, patches, and failover testing in high-availability environments. • Ensure compliance with NERC CIP and internal cybersecurity standards. • Performs other job-related duties as assigned Preferred Qualifications • Bachelor's degree in Engineering, Computer Science, or related field. • 1+ years of experience with EMS platforms (Hitachi Network Manager EMS preferred; Client e-terra or Siemens Spectrum experience acceptable). • Strong understanding of power system operations, SCADA, and EMS applications (SE, CA, OPF). • Hands-on experience with network modeling, telemetry mapping, and database management. • Familiarity with ICCP/TASE.2, RTU protocols (DNP3, IEC 60870-5), and EMS front-end processors. • Knowledge of cybersecurity practices and compliance frameworks (e.g., NERC CIP). • Proficiency in scripting (PowerShell, Python) for automation and bulk data management. • knowledge of process control commissioning and troubleshooting. • Ability to understand electrical schematics and drawings. • Review drawings packages and OEM specifications versus installed equipment to confirm it meets design and manufacturer standards. • Ability to understand SCADA and communication schematics and drawings. • Knowledge of automation protocols (Modbus, DNP3, CAN, OPC, EtherNet/IP and others) • Third party firm management • Schedule and planning understanding • Strong analytical skills, problem-solving • Interface with other projects stakeholder as required Physical Requirements / Working Environment Ability to lift up to 20 pounds frequently on a daily basis. Standing on Will Per Diem and Mob/De-Mob expense types be available for this requisition? No If Per Diem is available, please indicate the maximum amount: n If Nuclear Business Unit: On-Boarding Note Nuclear workers requiring unescorted badge access will follow onsite in-processing procedures. All others will be required to complete Non-Nuclear pre-assignment screenings through their staffing supplier. Please contact CWP with any questions: cwp@nexteraenergy.com or 561-694-4761. Will the selected worker require unescorted badge access into Nuclear protected areas? No Is NERC CIP unescorted physical or cyber access required for this assignment? No Which NERC access is needed? N/ Is Federal Energy Regulatory Commission access required? No Shift Type Standard Shift (8-5) Hours per Day 8 Hours per Week 40 Total Hours 2,096.00 Attachment 1:
Job Description - Power Electronics/Inverter Engineer Position: We are seeking a highly skilled Power Electronics/Inverter engineer Subject Matter Expert (SME) to join our utility-scale renewable energy team. This role is critical to ensuring successful commissioning, testing, and operational readiness of utility-scale inverter systems for solar, battery energy storage (BESS), and hybrid renewable energy projects. The ideal candidate will combine deep technical expertise in power electronics with hands-on commissioning experience and strong project management capabilities. Come to work on behalf of one of the world's largest renewable energy developer and builder as Power Electronics/Inverter engineer ensuring reliable, secure, and efficient operation of transmission-level SCADA and inverter applications during commissioning.
Location: Remote with frequent trips to Juno Beach Fl.
Job Duties & Responsibilities • Lead factory integration testing (FIT) for utility-scale inverters (1MW+ capacity) ensuring comprehensive pre-deployment validation • Execute and support site acceptance testing (SAT) including functional, performance, and grid compliance testing protocols • Perform comprehensive commissioning of inverter control systems and power electronics components • Manage inverter startup sequencing and initial energization procedures following safety protocols • Diagnose inverter faults and failures using proprietary OEM software tools and advanced diagnostic techniques • Coordinate and witness all required Power Purchase Agreement (PPA), Large Generator Interconnection Agreement (LGIA), and Original Equipment Manufacturer (OEM) testing until passing criteria are met prior to Commercial Operation Date (COD) • Develop and execute comprehensive test plans for grid compliance, performance validation, and safety verification • Ensure all testing meets utility standards, regulatory requirements, and NextEra Energy specifications • Document test results and provide detailed technical reports for regulatory and commercial stakeholders • Collaborate closely with SCADA teams to analyze inverter control systems and communication protocols • Review, create, and optimize inverter parameter models for various project types including commercial, industrial, and generation facilities • Support remote connectivity and monitoring system integration Provide technical expertise for SCADA HMI development and data point configuration • Develop and manage deployment procedures, quality control protocols, and warranty management processes • Proactively identify potential technical issues and implement corrective actions to prevent project delays • Coordinate with multiple stakeholders including OEMs, contractors, utilities, and internal teams • Manage project timelines and ensure deliverable quality meets NextEra Energy standards • Connect remotely to inverter software systems for diagnostics, parameter adjustments, and performance optimization • Provide remote technical support during commissioning and operational phases • Develop and maintain remote access protocols and cybersecurity compliance procedures
Preferred Qualifications • Bachelor's degree in Electrical Engineering, Power Systems Engineering, or related technical field • 1+ years of experience in power electronics and utility-scale inverter systems • Experience with advanced inverter functions (volt-var control, frequency response, grid forming) • Strong understanding of power system operations, SCADA, and EMS applications (SE, CA, OPF). • Hands-on experience with network, telemetry mapping, and database management. • Familiarity with ICCP/TASE.2, RTU protocols. • Knowledge of cybersecurity practices and compliance frameworks (e.g., NERC CIP). • knowledge of process control commissioning and troubleshooting. • Ability to understand electrical schematics and drawings. • Review drawings packages and OEM specifications versus installed equipment to confirm it meets design and manufacturer standards. • Ability to understand SCADA and communication schematics and drawings. • Knowledge of automation protocols (Modbus, DNP3, CAN, OPC, EtherNet/IP and others) • Third party firm management • Schedule and planning understanding • Strong analytical skills, problem-solving • Interface with other projects stakeholder.
Physical Requirements / Working Environment Ability to lift up to 20 pounds frequently on a daily basis. Standing on feet for extended periods of time. Ability to work at desk position in front of a computer monitor for extensive periods of time. Ability to operate a motor vehicle for purposes of commuting between 2 working locations. Ability to travel as required.
Attachment 2: Job Description - PLC Programmer SCADA Subject Matter Expert (SME)
Position: NextEra Energy is seeking an experienced PLC Programmer SCADA Subject Matter Expert (SME) to support our rapidly expanding Battery Energy Storage System (BESS) and renewable energy portfolio. This role will provide expert-level PLC programming and SCADA integration support for utility-scale projects, ensuring seamless commissioning and operational excellence.
Key Responsibilities
PLC Programming & Development Expert-level PLC programming for BESS and solar projects using Schneider M340/M580 platforms Develop, modify, and optimize control logic for utility-scale energy storage systems Create and maintain standardized PLC code libraries and templates Implement advanced control algorithms for hybrid PV-BESS operations SCADA Integration & Communications
Configure and troubleshoot Modbus communications between PLCs, inverters, and SCADA systems Integrate PLCs with Ignition HMI platforms and historian systems Establish robust communication protocols for real-time monitoring and control Support OPC server configuration and data exchange protocols Testing & Commissioning Support
Lead Factory Acceptance Testing (FAT) and Site Acceptance Testing (SAT) procedures Perform comprehensive PLC code validation and system integration testing Support commissioning teams with on-site troubleshooting and system optimization Execute Power Purchase Agreement (PPA) and Large Generator Interconnection Agreement (LGIA) testing requirements Technical Leadership & Collaboration
Serve as technical SME for PLC programming standards and best practices Coordinate with SCADA leads, project managers, and vendor teams Provide technical guidance for control system architecture decisions Documentation & Standards
Develop and maintain PLC programming documentation and procedures Create detailed Functional Requirements Documents (FRDs) for control systems Establish coding standards and version control protocols Support regulatory compliance documentation (NERC CIP, cybersecurity
Location:
Remote with frequent trips.
Preferred Qualifications
Bachelor's degree in electrical engineering, Computer Engineering, or related field 5+ years of experience in PLC programming, preferably Schneider Electric platforms Expert knowledge of Modbus, DNP3, and industrial communication protocols Experience with Ignition SCADA platform and HMI development Strong understanding of power systems and utility-scale energy project Proven experience in utility-scale renewable energy or power generation projects Knowledge of BESS control systems, inverters, and energy storage technologies Familiarity with grid interconnection requirements and utility standards Experience with FAT/SAT testing procedures and commissioning protocols Full accountability for PPA, LGIA, and OEM testing completion Ability to travel up to 25% for project commissioning support Strong analytical and troubleshooting skills Excellent communication and documentation abilities NERC CIP cybersecurity awareness preferred
Physical Requirements / Working Environment
Ability to lift up to 20 pounds frequently on a daily basis. Standing on feet for extended periods of time. Ability to work at desk position in front of a computer monitor for extensive periods of time. Ability to operate a motor vehicle for purposes of commuting between 2 working locations. Ability to travel as required.