WSP in the U.S.
Senior Instrumentation and Controls (I&C) Engineer
WSP in the U.S., Houston, Texas, United States, 77246
Senior Instrumentation and Controls (I&C) Engineer
Our team is seeking an energetic and responsive Senior Instrumentation and Controls (I&C) Engineer for our multidisciplinary Process Infrastructure and Design team based in Tempe, Arizona, South Jordan, Utah or Houston, Texas on a full-time basis. The team will work with a diverse set of global clients and projects in Environmental Infrastructure facilities, Oil & Gas, surface and underground mine infrastructure including dewatering, material handling, fueling and lubrication, maintenance shops, pumping stations, industrial facilities, water and wastewater industries, landfills and contaminated soil sites.
Location : Depending on candidate preference, this individual can work in our Tempe, AZ, South Jordan, UT or Houston, TX offices.
Your Impact
Development of a variety of I&C design documents such as design drawings, technical specifications and design basis calculations with a high level of competence and minimal oversight.
Demonstrate clear and prompt communication and foster leadership.
Work independently and collaborate in cross-discipline teams to meet project goals.
Compliance with codes and standards, governing regulations, industry practices, and internal procedures.
Develop and perform quality reviews for detailed engineering documents and technical specifications.
Mentor junior team members in technical excellence and career growth.
Review instrument and control systems vendor drawings and interface with suppliers, clients, other engineering disciplines, and detailers/designers.
Participate in the development and design review of piping and instrumentation diagrams (P&IDs).
Prepare and review control deliverables such as Control Narratives, Cause and Effect diagrams, System Architecture Diagrams, Instrument Location Layouts, Installation Details, Wiring & Interconnection Diagrams, PLC Layouts, and Loop Drawings.
Prepare and review instrument datasheets, I/O lists, instrument index, instrument selection, hazardous area classification.
Provide configuration of and develop programming for controls equipment, including PLCs, HMIs, DCS Systems, SCADA, etc.
Participate in client and project review meetings.
Prepare technical bid evaluations and attend FAT.
Collaborate with project management/engineering discipline to develop project budgets, schedules, scoping documents, design criteria and deliverables lists.
Promote engineering professionalism and maintain positive relationships internally and externally.
Who You Are Required Qualifications
Bachelor of Science Degree in Electrical Engineering (or related field) from ABET accredited program.
5 - 7+ years of relevant experience.
Advanced knowledge of Instrumentation Engineering is essential.
Advanced knowledge of applicable design standards governing corresponding design work, such as API, NFPA, ISA, PIP, IEC, IEEE, ISO, NACE, NESC.
Strong written and verbal communication and people management skills.
Proficient in SPI (Intools), AutoCAD, and other instrumentation design tools.
Strong understanding of control systems (PLC, DCS) and industrial networking protocols.
Demonstrate advanced ability to work with others in supplying information and seeking assistance as necessary.
A team player attitude and ability to work on multiple projects.
Must pass background check.
Desired Qualifications
Professional Engineer (PE) registration, or the ability to secure this registration within twelve (12) months of hire is a plus.
Master of Science Degree in Electrical Engineering (or related field) from ABET accredited program.
An up-to-date NCEES record.
Design-Build project execution experience.
Lead the design and specification of field instrumentation, control valves, and analyzers for oil & gas, mining, heavy industries, water industries and process facilities.
AutoCAD, Revit, and other design program competence.
About WSP WSP USA is the U.S. operating company of WSP, one of the world’s leading engineering and professional services firms. We are engineers, planners, technical experts, strategic advisors and construction management professionals. WSP USA designs lasting solutions in the buildings, transportation, energy, water and environment markets. With more than 15,000 employees in over 300 offices across the U.S., we partner with our clients to help communities prosper.
WSP provides a flexible and agile workplace model while meeting client needs. Employees are afforded a comprehensive suite of benefits including medical, dental, vision, disability, life, and retirement savings. WSP supports career growth and development. The selected candidate must be authorized to work in the United States.
WSP USA (and all of its U.S. companies) is an Equal Opportunity Employer Race/Age/Color/Religion/Sex/Sexual Orientation/Gender Identity/National Origin/Disability or Protected Veteran Status.
NOTICE TO THIRD PARTY AGENCIES: WSP does not accept unsolicited resumes from recruiters, employment agencies, or other staffing services. Unsolicited resumes will become the property of WSP.
#J-18808-Ljbffr
Location : Depending on candidate preference, this individual can work in our Tempe, AZ, South Jordan, UT or Houston, TX offices.
Your Impact
Development of a variety of I&C design documents such as design drawings, technical specifications and design basis calculations with a high level of competence and minimal oversight.
Demonstrate clear and prompt communication and foster leadership.
Work independently and collaborate in cross-discipline teams to meet project goals.
Compliance with codes and standards, governing regulations, industry practices, and internal procedures.
Develop and perform quality reviews for detailed engineering documents and technical specifications.
Mentor junior team members in technical excellence and career growth.
Review instrument and control systems vendor drawings and interface with suppliers, clients, other engineering disciplines, and detailers/designers.
Participate in the development and design review of piping and instrumentation diagrams (P&IDs).
Prepare and review control deliverables such as Control Narratives, Cause and Effect diagrams, System Architecture Diagrams, Instrument Location Layouts, Installation Details, Wiring & Interconnection Diagrams, PLC Layouts, and Loop Drawings.
Prepare and review instrument datasheets, I/O lists, instrument index, instrument selection, hazardous area classification.
Provide configuration of and develop programming for controls equipment, including PLCs, HMIs, DCS Systems, SCADA, etc.
Participate in client and project review meetings.
Prepare technical bid evaluations and attend FAT.
Collaborate with project management/engineering discipline to develop project budgets, schedules, scoping documents, design criteria and deliverables lists.
Promote engineering professionalism and maintain positive relationships internally and externally.
Who You Are Required Qualifications
Bachelor of Science Degree in Electrical Engineering (or related field) from ABET accredited program.
5 - 7+ years of relevant experience.
Advanced knowledge of Instrumentation Engineering is essential.
Advanced knowledge of applicable design standards governing corresponding design work, such as API, NFPA, ISA, PIP, IEC, IEEE, ISO, NACE, NESC.
Strong written and verbal communication and people management skills.
Proficient in SPI (Intools), AutoCAD, and other instrumentation design tools.
Strong understanding of control systems (PLC, DCS) and industrial networking protocols.
Demonstrate advanced ability to work with others in supplying information and seeking assistance as necessary.
A team player attitude and ability to work on multiple projects.
Must pass background check.
Desired Qualifications
Professional Engineer (PE) registration, or the ability to secure this registration within twelve (12) months of hire is a plus.
Master of Science Degree in Electrical Engineering (or related field) from ABET accredited program.
An up-to-date NCEES record.
Design-Build project execution experience.
Lead the design and specification of field instrumentation, control valves, and analyzers for oil & gas, mining, heavy industries, water industries and process facilities.
AutoCAD, Revit, and other design program competence.
About WSP WSP USA is the U.S. operating company of WSP, one of the world’s leading engineering and professional services firms. We are engineers, planners, technical experts, strategic advisors and construction management professionals. WSP USA designs lasting solutions in the buildings, transportation, energy, water and environment markets. With more than 15,000 employees in over 300 offices across the U.S., we partner with our clients to help communities prosper.
WSP provides a flexible and agile workplace model while meeting client needs. Employees are afforded a comprehensive suite of benefits including medical, dental, vision, disability, life, and retirement savings. WSP supports career growth and development. The selected candidate must be authorized to work in the United States.
WSP USA (and all of its U.S. companies) is an Equal Opportunity Employer Race/Age/Color/Religion/Sex/Sexual Orientation/Gender Identity/National Origin/Disability or Protected Veteran Status.
NOTICE TO THIRD PARTY AGENCIES: WSP does not accept unsolicited resumes from recruiters, employment agencies, or other staffing services. Unsolicited resumes will become the property of WSP.
#J-18808-Ljbffr