Hensel Phelps Construction Co.
Lead Quality Control Engineer - Structural Steel, Reinforced Concrete, and Civil
Hensel Phelps Construction Co., Irvine, California, United States, 92713
Lead Quality Control Engineer - Structural Steel, Reinforced Concrete, and Civil Paving
Job Category : QUALITY CONTROL Requisition Number : LEADQ010772 Posted: October 10, 2025 Full-Time Locations
Showing 1 location SoCal Office, 18850 Von Karman Ave., STE 100, Irvine, CA 92612, USA Employment Offer Contingent Upon Successful Completion of the Following: Verification of Work Authorization and Employment Eligibility Substance Abuse Screening Physical Exam (if applicable) Background Checks for Badging/Security Clearances (if applicable) About Hensel Phelps: Founded in 1937, Hensel Phelps specializes in building development, construction and facility services in markets ranging from aviation to government, commercial, transportation, critical facilities, healthcare and transportation. Ranked #1 in aviation and #6 overall general contractor in 2024 by BD+C, Hensel Phelps is one of the largest employee-owned general contractors in the country. Driven to deliver EXCELLENCE in all we do and supported by our core values of Ownership, Integrity, Builder, Diversity and Community, Hensel Phelps brings our clients' visions to life with a comprehensive approach that begins with innovative planning and extends throughout the life of the property. The Hensel Phelps Way is built on four pillars: People, Process, Partnership and Technology. Position Description:
The Quality Control Specialist for Structural Steel, Reinforced Concrete, and Civil Paving is responsible for ensuring that the highest standards of quality and code compliance are upheld throughout all phases of Structural Steel, Reinforced Concrete, and Civil Paving system implementation on the project. This role requires daily on-site engagement, including pre-inspections, verification of installation and testing, and thorough documentation to ensure compliance with contract documents, specifications, and applicable codes and standards. The Quality Control Specialist will represent Hensel Phelps and our trade partners in coordination with the owner's inspection staff and Authorities Having Jurisdiction. The role includes scheduling and conducting inspections, resolving issues, and verifying corrective actions through field verification and proper documentation. Involved in all phases from startup to final turnover, while maintaining detailed daily reports submitted to the Quality Control Manager. The role also supports the implementation of the six-step quality and safety process, participates in preparatory meetings, coordinates third-party inspections, and audits trade partner quality procedures. This position plays a critical role in maintaining quality standards, supporting issue resolution, and ensuring successful project delivery. Position Qualifications:
Preferred: A 4-year degree in civil or structural engineering, architecture or construction management, or similar experience in a related position. Minimum of 5 years field experience in Quality Control, installation, and inspection of Structural Steel, Reinforced Concrete, and Civil Paving systems. Preferred Certifications: AWS Certified Welding Inspector (CWI) ICC S1 Structural Steel and Bolting ICC S2 Structural Welding ICC Category 49 Reinforced Concrete Special Inspector ACI Concrete Field-Testing Technician — Grade I ICC EC Soils Other relevant certifications related to Structural Steel, Reinforced Concrete, and Civil Paving systems Must be technically experienced and capable of understanding specifications, standards, and code requirements related to Structural Steel, Reinforced Concrete, and Civil Paving disciplines. Valid Driver’s License. Computer software - Microsoft Office Suite, specifically Excel based templates, Prolog, Primavera and AutoCAD. Interface daily with Structural Steel, Reinforced Concrete, and Civil Paving trade partners, the owner’s inspection staff, and applicable Authorities Having Jurisdiction (AHJs) to ensure all work complies with project documents, specifications, and codes. Conduct daily on-site pre-inspections of Structural Steel, Reinforced Concrete, and Civil Paving work scopes to verify installation and testing requirements are met in accordance with project specifications, quality standards, and codes through to completion. Collaborate with trade partners to actively participate in issue resolution, ensuring timely identification, communication, and closure of field-related challenges to maintain project schedule and quality standards. Proactively identify field issues related to Structural Steel, Reinforced Concrete, and Civil Paving systems and track all deficiencies noted by AHJs. Verify corrective actions with field verification and maintain thorough documentation of issue resolution and compliance. Participate in all phases of system implementation, including startup, material verification, full installation, system testing, and inspection processes. Ensure work aligns with contract documents, project specifications, and codes. Provide daily reports to the Quality Control Manager detailing inspection activities, issue tracking and resolution status, coordination with trade partners and AHJs, and overall contract compliance. Support and participate in shop fabrication and inspection visits to ensure fabrication aligns with project specifications and codes prior to installation. Participate in the start-up and implementation of the six-step quality control/safety process, including site-specific quality program elements. Lead weekly QC meetings and trade partner foreman meetings as directed by the QC Manager. Assist with the development of preparatory meeting agendas and participate in preparatory meetings prior to feature work. Review and maintain the project quality process log (QPL). Interface directly with owner's quality assurance and management on quality-related issues. Review and participate in all initial and follow-up inspection reports, and close-in inspection results. Be fully aware of the contract, plans, specifications and applicable codes. Receive trade partner test and inspection requests and produce a coordinated test and inspection schedule. Document and submit a daily quality control report for the scope of work. Audit the trade partner quality control procedures and report chronic problems to upper management. Participate in the selection process for outside testing contractors and verify adherence to standards and documentation. Coordinate third-party testing agency activities and schedule source inspections. Physical Work Classification & Demands: Moderate Work. Exerting up to 50 pounds of force occasionally, and/or up to 25 pounds of force frequently, and/or 10 pounds of force constantly to move objects. • The individual in this position will periodically walk, kneel, sit, crouch, reach, stoop, read/see, speak, push, pull, lift, stand, and finger/type. The frequency of each action varies by workflow and office activity. • Walking - The person in this position needs to occasionally move about inside the office to access file cabinets, office machinery, boxes, cabinets, etc. • Constantly operates a computer and other office machinery, such as a calculator, copy machine, phone, computer, and computer printer. • The person in this position frequently communicates with employees and external stakeholders regarding a variety of topics related to office administration. • Constantly computes, analyzes, and conceptualizes mathematical calculations and formulas. • The person in this position regularly sits in a stationary position in front of a computer screen. • Constantly reads written communications and views mail submissions. Will also need to read blueprints and take/verify field measurements. • Climbing – Ascending or descending ladders, stairs, scaffolding and ramps at various heights. • Balancing – Ability to maintain body equilibrium to prevent falling and to walk, stand or crouch. • Stooping – Bending the body downward and forward by the spine at the waist. • Visual acuity and ability to operate a vehicle as certified and appropriate. • Occasionally exposed to high and low temperatures • Frequently exposed to noisy environments and outdoor elements such as precipitation and wind. Compensation Range (Southern California Only) Salary range: $150,000.00 - $300,000.00 Hensel Phelps provides generous benefits for our salaried employees. This position is eligible for company paid medical insurance, life insurance, accidental death & dismemberment, long-term disability, 401(K) retirement plan, health savings account (HSA) (HSA not available in Hawaii), and our employee assistance program (EAP). It also is eligible for employee paid enrollment in vision and dental insurance. Hensel Phelps also believes in the importance of taking time to recharge. As a result, salaried employees are eligible for paid time off beginning upon hire. Salaried positions (project engineers and above) participate in an annual bonus plan, subject to company and employee performance. Salaried employees (this is all salaried employees) are also eligible for a company cell phone or cell phone allowance in accordance with company policy. Further, salaried employees (project engineers and above) also receive either a vehicle or vehicle allowance in accordance with Hensel Phelps’ policies. Based on position location, a cost of living adjustment (COLA) may also be included (subject to periodic review and adjustment). Equal Opportunity and Affirmative Action Employer: Hensel Phelps is an equal opportunity employer. Hensel Phelps is committed to engaging in affirmative action to increase employment opportunities for protected veterans and individuals with disabilities. Hensel Phelps shall not discriminate against any employee or applicant for employment on the basis of race, color, religion, sex, age, national origin, sexual orientation, gender identity and expression, domestic partner status, pregnancy, disability, citizenship, genetic information, protected veteran status, or any other characteristic protected by federal, state, or local law. The contractor will not discharge or in any manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor’s legal duty to furnish information. 41 CFR 60-1.35(c) #LI-DA1 Qualifications
Skills Experience Licenses & Certifications Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws.For further information, please review the Know Your Rights notice from the Department of Labor.
#J-18808-Ljbffr
Job Category : QUALITY CONTROL Requisition Number : LEADQ010772 Posted: October 10, 2025 Full-Time Locations
Showing 1 location SoCal Office, 18850 Von Karman Ave., STE 100, Irvine, CA 92612, USA Employment Offer Contingent Upon Successful Completion of the Following: Verification of Work Authorization and Employment Eligibility Substance Abuse Screening Physical Exam (if applicable) Background Checks for Badging/Security Clearances (if applicable) About Hensel Phelps: Founded in 1937, Hensel Phelps specializes in building development, construction and facility services in markets ranging from aviation to government, commercial, transportation, critical facilities, healthcare and transportation. Ranked #1 in aviation and #6 overall general contractor in 2024 by BD+C, Hensel Phelps is one of the largest employee-owned general contractors in the country. Driven to deliver EXCELLENCE in all we do and supported by our core values of Ownership, Integrity, Builder, Diversity and Community, Hensel Phelps brings our clients' visions to life with a comprehensive approach that begins with innovative planning and extends throughout the life of the property. The Hensel Phelps Way is built on four pillars: People, Process, Partnership and Technology. Position Description:
The Quality Control Specialist for Structural Steel, Reinforced Concrete, and Civil Paving is responsible for ensuring that the highest standards of quality and code compliance are upheld throughout all phases of Structural Steel, Reinforced Concrete, and Civil Paving system implementation on the project. This role requires daily on-site engagement, including pre-inspections, verification of installation and testing, and thorough documentation to ensure compliance with contract documents, specifications, and applicable codes and standards. The Quality Control Specialist will represent Hensel Phelps and our trade partners in coordination with the owner's inspection staff and Authorities Having Jurisdiction. The role includes scheduling and conducting inspections, resolving issues, and verifying corrective actions through field verification and proper documentation. Involved in all phases from startup to final turnover, while maintaining detailed daily reports submitted to the Quality Control Manager. The role also supports the implementation of the six-step quality and safety process, participates in preparatory meetings, coordinates third-party inspections, and audits trade partner quality procedures. This position plays a critical role in maintaining quality standards, supporting issue resolution, and ensuring successful project delivery. Position Qualifications:
Preferred: A 4-year degree in civil or structural engineering, architecture or construction management, or similar experience in a related position. Minimum of 5 years field experience in Quality Control, installation, and inspection of Structural Steel, Reinforced Concrete, and Civil Paving systems. Preferred Certifications: AWS Certified Welding Inspector (CWI) ICC S1 Structural Steel and Bolting ICC S2 Structural Welding ICC Category 49 Reinforced Concrete Special Inspector ACI Concrete Field-Testing Technician — Grade I ICC EC Soils Other relevant certifications related to Structural Steel, Reinforced Concrete, and Civil Paving systems Must be technically experienced and capable of understanding specifications, standards, and code requirements related to Structural Steel, Reinforced Concrete, and Civil Paving disciplines. Valid Driver’s License. Computer software - Microsoft Office Suite, specifically Excel based templates, Prolog, Primavera and AutoCAD. Interface daily with Structural Steel, Reinforced Concrete, and Civil Paving trade partners, the owner’s inspection staff, and applicable Authorities Having Jurisdiction (AHJs) to ensure all work complies with project documents, specifications, and codes. Conduct daily on-site pre-inspections of Structural Steel, Reinforced Concrete, and Civil Paving work scopes to verify installation and testing requirements are met in accordance with project specifications, quality standards, and codes through to completion. Collaborate with trade partners to actively participate in issue resolution, ensuring timely identification, communication, and closure of field-related challenges to maintain project schedule and quality standards. Proactively identify field issues related to Structural Steel, Reinforced Concrete, and Civil Paving systems and track all deficiencies noted by AHJs. Verify corrective actions with field verification and maintain thorough documentation of issue resolution and compliance. Participate in all phases of system implementation, including startup, material verification, full installation, system testing, and inspection processes. Ensure work aligns with contract documents, project specifications, and codes. Provide daily reports to the Quality Control Manager detailing inspection activities, issue tracking and resolution status, coordination with trade partners and AHJs, and overall contract compliance. Support and participate in shop fabrication and inspection visits to ensure fabrication aligns with project specifications and codes prior to installation. Participate in the start-up and implementation of the six-step quality control/safety process, including site-specific quality program elements. Lead weekly QC meetings and trade partner foreman meetings as directed by the QC Manager. Assist with the development of preparatory meeting agendas and participate in preparatory meetings prior to feature work. Review and maintain the project quality process log (QPL). Interface directly with owner's quality assurance and management on quality-related issues. Review and participate in all initial and follow-up inspection reports, and close-in inspection results. Be fully aware of the contract, plans, specifications and applicable codes. Receive trade partner test and inspection requests and produce a coordinated test and inspection schedule. Document and submit a daily quality control report for the scope of work. Audit the trade partner quality control procedures and report chronic problems to upper management. Participate in the selection process for outside testing contractors and verify adherence to standards and documentation. Coordinate third-party testing agency activities and schedule source inspections. Physical Work Classification & Demands: Moderate Work. Exerting up to 50 pounds of force occasionally, and/or up to 25 pounds of force frequently, and/or 10 pounds of force constantly to move objects. • The individual in this position will periodically walk, kneel, sit, crouch, reach, stoop, read/see, speak, push, pull, lift, stand, and finger/type. The frequency of each action varies by workflow and office activity. • Walking - The person in this position needs to occasionally move about inside the office to access file cabinets, office machinery, boxes, cabinets, etc. • Constantly operates a computer and other office machinery, such as a calculator, copy machine, phone, computer, and computer printer. • The person in this position frequently communicates with employees and external stakeholders regarding a variety of topics related to office administration. • Constantly computes, analyzes, and conceptualizes mathematical calculations and formulas. • The person in this position regularly sits in a stationary position in front of a computer screen. • Constantly reads written communications and views mail submissions. Will also need to read blueprints and take/verify field measurements. • Climbing – Ascending or descending ladders, stairs, scaffolding and ramps at various heights. • Balancing – Ability to maintain body equilibrium to prevent falling and to walk, stand or crouch. • Stooping – Bending the body downward and forward by the spine at the waist. • Visual acuity and ability to operate a vehicle as certified and appropriate. • Occasionally exposed to high and low temperatures • Frequently exposed to noisy environments and outdoor elements such as precipitation and wind. Compensation Range (Southern California Only) Salary range: $150,000.00 - $300,000.00 Hensel Phelps provides generous benefits for our salaried employees. This position is eligible for company paid medical insurance, life insurance, accidental death & dismemberment, long-term disability, 401(K) retirement plan, health savings account (HSA) (HSA not available in Hawaii), and our employee assistance program (EAP). It also is eligible for employee paid enrollment in vision and dental insurance. Hensel Phelps also believes in the importance of taking time to recharge. As a result, salaried employees are eligible for paid time off beginning upon hire. Salaried positions (project engineers and above) participate in an annual bonus plan, subject to company and employee performance. Salaried employees (this is all salaried employees) are also eligible for a company cell phone or cell phone allowance in accordance with company policy. Further, salaried employees (project engineers and above) also receive either a vehicle or vehicle allowance in accordance with Hensel Phelps’ policies. Based on position location, a cost of living adjustment (COLA) may also be included (subject to periodic review and adjustment). Equal Opportunity and Affirmative Action Employer: Hensel Phelps is an equal opportunity employer. Hensel Phelps is committed to engaging in affirmative action to increase employment opportunities for protected veterans and individuals with disabilities. Hensel Phelps shall not discriminate against any employee or applicant for employment on the basis of race, color, religion, sex, age, national origin, sexual orientation, gender identity and expression, domestic partner status, pregnancy, disability, citizenship, genetic information, protected veteran status, or any other characteristic protected by federal, state, or local law. The contractor will not discharge or in any manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor’s legal duty to furnish information. 41 CFR 60-1.35(c) #LI-DA1 Qualifications
Skills Experience Licenses & Certifications Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws.For further information, please review the Know Your Rights notice from the Department of Labor.
#J-18808-Ljbffr