Energy Jobline ZR
Quality Inspector 3 weekend in Newington
Energy Jobline ZR, Newington, Connecticut, us, 06111
Energy Jobline is the largest and fastest growing global Energy Job Board and Energy Hub. We have an audience reach of over 7 million energy professionals, 400,000+ monthly advertised global energy and engineering jobs, and work with the leading energy companies worldwide.
We focus on the Oil & Gas, Renewables, Engineering, Power, and Nuclear markets as well as emerging technologies in EV, Battery, and Fusion. We are committed to ensuring that we offer the most exciting career opportunities from around the world for our jobseekers.
Quality Inspector 3 – Non-exempt Hanwha Aerospace USA has long been recognized as a leader in the development and supply of flight critical Aerospace/Defense components and assemblies. Operating out of four state-of-the-art facilities located in Connecticut, Hanwha Aerospace USA offers growth and career development opportunities to enrich your talents.
We looking for an Aerospace Inspector to perform 1st piece, in-process and final inspection on aircraft engine components for compliance with engineering drawings, customer requirements and company specifications before or after manufacturing processes. This will also include performing inspection procedures including checking dimensions of related surfaces, holes, etc., as well as assessment of finish and detection of undesirable nonconformances. They will be required to approve items within specifications and recommend disposition of items not meeting standards. They will be responsible for verifying identification of part and supplier (internal or outside supplier).
Ability to visually, dimensionally and final inspect major rotating components such as disks, shafts, air seals drums, and hubs. Work with shop personnel to assist operators in setting up gages, and performing in-process inspections. Knowledge of calibrated tooling and equipment as well as CMM experience is critical. Extensive knowledge of FAA requirements with regards to inspection criteria is also essential.
Location: Newington, CT Reports to:
Quality Supervisor/Manager Essential Duties & Responsibilities Reasonable accommodations may be made to enable individuals with disabilities to perform.
Obtains blueprints and company specification sheet for the item and particular order.
Must be capable of reviewing internal operation sheets against customer blueprints.
Determines inspection procedure to ensure complete verification of specifications and dimensions.
Obtains necessary fixtures, gauges, and indicators to check parts for compliance with specifications, within prescribed tolerances.
Completes certain assurance checklists during the process. Performs dimensional checks of parts while in the machine when necessary.
Rejects unacceptable items, documents nonconformance, and moves part to quality clinic.
Completes required company paperwork on machined parts inspection activity.
Ability to read and understand work instructions such as Op Sheets, Engine Manuals, Customer Purchase Order Requirements, etc.
Ability use measuring instruments such as a micrometer, caliper, swing gage, etc.
Accurate documentation of all inspections (Ex: Receiving, In-Process, Final) and ability to work with operators to ensure all requirements are met.
Communicates with co-workers, colleagues and Supervisors to receive instructions and/or guidance and coordinate activities.
Organize and maintain inspection department, gaging methods, etc.
Work independently and efficiently to meet customer requirements.
Willingness to work with shop personnel to induct incoming parts and aid in the expeditious shipment of critical parts
Ability to read and comprehend instructions, short correspondence, and memos. Adaptability to different inspection methods
Adhere to standards of safety and housekeeping as established
Performs other related duties or responsibilities as requested or required, whether or not specifically mentioned in this job description.
Participate in training as required
5-10% Domestic Travel required
Requirements
Must be a “US Person” as defined by US Government and able to work without restriction with ITAR related data.
High school diploma or general education degree (GED) required
5+ years experience as an aerospace part inspector; or equivalent combination of education and experience.
CMM experience with PC-DMIS
Ability to use measuring instruments such as a micrometer, caliper, swing gage, etc.
Knowledge of blueprint reading and machinery limitations.
Ability to read and comprehend simple instructions, short correspondence, and memos.
Must have visual acuity enough to be able to read machine dials, gages, Op sheets and precision measuring equipment.
Must be able to read, write, understand, and speak English at a functional level
AAP Statement Hanwha Aerospace USA, is an Equal Opportunity Employer. We conform to all the laws, statutes, and regulations concerning equal employment opportunities and affirmative action. We strongly encourage women, minorities, individuals with disabilities, and veterans to apply to all of our job openings. All qualified applicants will receive consideration for employment without regard to , , , , , , age, status, Genetic Information & Testing, Family & Medical Leave, , and or Expression, protected veteran status, or any other characteristic protected by law. We prohibit Retaliation against individuals who bring forth any complaint, orally or in writing, to the employer or the government, or against any individuals who assist or participate in the investigation of any complaint or otherwise oppose discrimination.
*Subject to change with or without notice*
Fri-SUn 5a-5p
If you are interested in applying for this job please press the Apply Button and follow the application process. Energy Jobline wishes you the very best of luck in your next career move.
#J-18808-Ljbffr
We focus on the Oil & Gas, Renewables, Engineering, Power, and Nuclear markets as well as emerging technologies in EV, Battery, and Fusion. We are committed to ensuring that we offer the most exciting career opportunities from around the world for our jobseekers.
Quality Inspector 3 – Non-exempt Hanwha Aerospace USA has long been recognized as a leader in the development and supply of flight critical Aerospace/Defense components and assemblies. Operating out of four state-of-the-art facilities located in Connecticut, Hanwha Aerospace USA offers growth and career development opportunities to enrich your talents.
We looking for an Aerospace Inspector to perform 1st piece, in-process and final inspection on aircraft engine components for compliance with engineering drawings, customer requirements and company specifications before or after manufacturing processes. This will also include performing inspection procedures including checking dimensions of related surfaces, holes, etc., as well as assessment of finish and detection of undesirable nonconformances. They will be required to approve items within specifications and recommend disposition of items not meeting standards. They will be responsible for verifying identification of part and supplier (internal or outside supplier).
Ability to visually, dimensionally and final inspect major rotating components such as disks, shafts, air seals drums, and hubs. Work with shop personnel to assist operators in setting up gages, and performing in-process inspections. Knowledge of calibrated tooling and equipment as well as CMM experience is critical. Extensive knowledge of FAA requirements with regards to inspection criteria is also essential.
Location: Newington, CT Reports to:
Quality Supervisor/Manager Essential Duties & Responsibilities Reasonable accommodations may be made to enable individuals with disabilities to perform.
Obtains blueprints and company specification sheet for the item and particular order.
Must be capable of reviewing internal operation sheets against customer blueprints.
Determines inspection procedure to ensure complete verification of specifications and dimensions.
Obtains necessary fixtures, gauges, and indicators to check parts for compliance with specifications, within prescribed tolerances.
Completes certain assurance checklists during the process. Performs dimensional checks of parts while in the machine when necessary.
Rejects unacceptable items, documents nonconformance, and moves part to quality clinic.
Completes required company paperwork on machined parts inspection activity.
Ability to read and understand work instructions such as Op Sheets, Engine Manuals, Customer Purchase Order Requirements, etc.
Ability use measuring instruments such as a micrometer, caliper, swing gage, etc.
Accurate documentation of all inspections (Ex: Receiving, In-Process, Final) and ability to work with operators to ensure all requirements are met.
Communicates with co-workers, colleagues and Supervisors to receive instructions and/or guidance and coordinate activities.
Organize and maintain inspection department, gaging methods, etc.
Work independently and efficiently to meet customer requirements.
Willingness to work with shop personnel to induct incoming parts and aid in the expeditious shipment of critical parts
Ability to read and comprehend instructions, short correspondence, and memos. Adaptability to different inspection methods
Adhere to standards of safety and housekeeping as established
Performs other related duties or responsibilities as requested or required, whether or not specifically mentioned in this job description.
Participate in training as required
5-10% Domestic Travel required
Requirements
Must be a “US Person” as defined by US Government and able to work without restriction with ITAR related data.
High school diploma or general education degree (GED) required
5+ years experience as an aerospace part inspector; or equivalent combination of education and experience.
CMM experience with PC-DMIS
Ability to use measuring instruments such as a micrometer, caliper, swing gage, etc.
Knowledge of blueprint reading and machinery limitations.
Ability to read and comprehend simple instructions, short correspondence, and memos.
Must have visual acuity enough to be able to read machine dials, gages, Op sheets and precision measuring equipment.
Must be able to read, write, understand, and speak English at a functional level
AAP Statement Hanwha Aerospace USA, is an Equal Opportunity Employer. We conform to all the laws, statutes, and regulations concerning equal employment opportunities and affirmative action. We strongly encourage women, minorities, individuals with disabilities, and veterans to apply to all of our job openings. All qualified applicants will receive consideration for employment without regard to , , , , , , age, status, Genetic Information & Testing, Family & Medical Leave, , and or Expression, protected veteran status, or any other characteristic protected by law. We prohibit Retaliation against individuals who bring forth any complaint, orally or in writing, to the employer or the government, or against any individuals who assist or participate in the investigation of any complaint or otherwise oppose discrimination.
*Subject to change with or without notice*
Fri-SUn 5a-5p
If you are interested in applying for this job please press the Apply Button and follow the application process. Energy Jobline wishes you the very best of luck in your next career move.
#J-18808-Ljbffr