Cts Technology Solutions, Inc.
We are seeking Mid-Level Liaison Engineers to support the Portland, Oregon site. We are looking for a proactive individual who can make prompt engineering decisions and who want to go beyond their desk and into the factory for hands on engineering. This position requires excellent communication and collaboration skills as the candidate will be partnering closely with production personnel. The candidate will be the engineering representative on the factory floor transforming design into reality.
Responsibilities
Analyzes, conducts root cause analysis and develops dispositions for production non-conformances.
Applies knowledge of Company design principles to assess and resolve product/process issues through the product lifecycle.
Applies engineering principles to research technical, operational and quality issues in support of executing final engineering solutions.
Identifies documents, analyzes reported problems and communicates deviations that could impact design intent and safety; recommends and manages resolution.
Develops and implements product/process improvements.
Supports Integrated Product Teams (IPT) and participates in design reviews.
Represents the engineering community from initial build through the production and post-production environment.
Ensures supplier and build partner compliance with Company standards.
Develops customer correspondence for continued safe operation and maintenance of equipment.
Participates in on-site disabled product repair teams, accident investigation and support teams.
Analyzes damage repair or structural modification to determine appropriate jacking and shoring, prevent collateral damage and assure a safe work environment.
Designs interim structural repairs and conducts static strength analysis.
Develops non-destructive test procedures, tools and standards.
This position is fully onsite.
Shift: This position is for multiple shifts and may require off shift, weekend, and travel assignments. The candidate may periodically be assigned to first, second, or third shift as well as weekend or daily overtime.
Requirements Basic Qualifications (Required Skills/Experience):
Bachelor's or Masters of Science Degree from an ABET OR ABET equivalent accredited course of study in Engineering
5 or more years of experience in structures, systems, design, or production engineering (Mid- Level).
2+ years of experience in prior Materiel Review Board
Preferred Qualifications (Desired Skills/Experience):
Liaison engineers that have experience across the following, will be looked for:
Understanding for materials
Material types - steel, aluminum, titanium - strength/capabilities
Material forms – bar stock, forgings, castings and reactions to machining
Post machining processing
Understanding machining and machining limitations
Geometry and sequencing for material removal (multiple pass, speed and feed of cutter)
Machine practices – machining, broaching, honing, etc
Load path analysis for complex, integrated shapes – thin walls, undercuts, mismatches
Surface condition and prep – discoloration, burns, drill/cutter breaks (FOD)
Understanding of machined part dimensions and tolerance (GD&T)
GD&T – True position, parallel surface, bonus tolerance, etc - used heavily (GD&T training 77100 Course – minimum)
Interpret drawing datums, surfaces, profiles for tolerancing
Examples - requirements between gear/shaft fit up into housings, fit up of housing sections (base and cover)
Spatial Analyzer analysis/modeling of discrepant conditions
Metrology - methods, limitations, and interpretation
Understanding of gears/shafts and gear interaction
Gear table understanding
Details - Teeth/spline profiles, runout, measurement over wires
Install – gear patterns, gear engagement, bearing/shaft fit
Understanding of material processing
Heat treat, induction hardening, stress relief
Shot and glass peening, abrasive blast cleaning, etching
Plating – cad, chrome, Zi-Ni
Finishing – anodize, passivate, primer and paint sequence
Understanding functional test requirements
Diagnosing impacts to operation and performance at the airplane level
Range of FT acceptance – RPM, Torque, gaps/clearance
Understanding of general repair for machined parts
-M bushings, heli-coils, and inserts on oversized bores and holes
Blending on machined materials, re-processing, re-finishing requirements
Corrosion protection post processing rework - seal and primer requirements
Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 5 or more years' related work experience or an equivalent combination of technical education and experience (e.g. PhD, Master+3 years' related work experience). In the USA, ABET accreditation is the preferred, although not required, accreditation standard.
CTS Pays For Referrals!
Refer a friend or colleague to join our team and enjoy fantastic rewards through our referral program. Contact us today to learn more!!
Discover Our Benefits
At CTS, we offer a comprehensive benefits package to support our employees, including:
Comprehensive healthcare coverage
Paid time off
Retirement savings plans
Learn more about our benefits!
#J-18808-Ljbffr
Responsibilities
Analyzes, conducts root cause analysis and develops dispositions for production non-conformances.
Applies knowledge of Company design principles to assess and resolve product/process issues through the product lifecycle.
Applies engineering principles to research technical, operational and quality issues in support of executing final engineering solutions.
Identifies documents, analyzes reported problems and communicates deviations that could impact design intent and safety; recommends and manages resolution.
Develops and implements product/process improvements.
Supports Integrated Product Teams (IPT) and participates in design reviews.
Represents the engineering community from initial build through the production and post-production environment.
Ensures supplier and build partner compliance with Company standards.
Develops customer correspondence for continued safe operation and maintenance of equipment.
Participates in on-site disabled product repair teams, accident investigation and support teams.
Analyzes damage repair or structural modification to determine appropriate jacking and shoring, prevent collateral damage and assure a safe work environment.
Designs interim structural repairs and conducts static strength analysis.
Develops non-destructive test procedures, tools and standards.
This position is fully onsite.
Shift: This position is for multiple shifts and may require off shift, weekend, and travel assignments. The candidate may periodically be assigned to first, second, or third shift as well as weekend or daily overtime.
Requirements Basic Qualifications (Required Skills/Experience):
Bachelor's or Masters of Science Degree from an ABET OR ABET equivalent accredited course of study in Engineering
5 or more years of experience in structures, systems, design, or production engineering (Mid- Level).
2+ years of experience in prior Materiel Review Board
Preferred Qualifications (Desired Skills/Experience):
Liaison engineers that have experience across the following, will be looked for:
Understanding for materials
Material types - steel, aluminum, titanium - strength/capabilities
Material forms – bar stock, forgings, castings and reactions to machining
Post machining processing
Understanding machining and machining limitations
Geometry and sequencing for material removal (multiple pass, speed and feed of cutter)
Machine practices – machining, broaching, honing, etc
Load path analysis for complex, integrated shapes – thin walls, undercuts, mismatches
Surface condition and prep – discoloration, burns, drill/cutter breaks (FOD)
Understanding of machined part dimensions and tolerance (GD&T)
GD&T – True position, parallel surface, bonus tolerance, etc - used heavily (GD&T training 77100 Course – minimum)
Interpret drawing datums, surfaces, profiles for tolerancing
Examples - requirements between gear/shaft fit up into housings, fit up of housing sections (base and cover)
Spatial Analyzer analysis/modeling of discrepant conditions
Metrology - methods, limitations, and interpretation
Understanding of gears/shafts and gear interaction
Gear table understanding
Details - Teeth/spline profiles, runout, measurement over wires
Install – gear patterns, gear engagement, bearing/shaft fit
Understanding of material processing
Heat treat, induction hardening, stress relief
Shot and glass peening, abrasive blast cleaning, etching
Plating – cad, chrome, Zi-Ni
Finishing – anodize, passivate, primer and paint sequence
Understanding functional test requirements
Diagnosing impacts to operation and performance at the airplane level
Range of FT acceptance – RPM, Torque, gaps/clearance
Understanding of general repair for machined parts
-M bushings, heli-coils, and inserts on oversized bores and holes
Blending on machined materials, re-processing, re-finishing requirements
Corrosion protection post processing rework - seal and primer requirements
Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g. Bachelor) and typically 5 or more years' related work experience or an equivalent combination of technical education and experience (e.g. PhD, Master+3 years' related work experience). In the USA, ABET accreditation is the preferred, although not required, accreditation standard.
CTS Pays For Referrals!
Refer a friend or colleague to join our team and enjoy fantastic rewards through our referral program. Contact us today to learn more!!
Discover Our Benefits
At CTS, we offer a comprehensive benefits package to support our employees, including:
Comprehensive healthcare coverage
Paid time off
Retirement savings plans
Learn more about our benefits!
#J-18808-Ljbffr