Sundt Construction
Job Summary
Basic Job Functions. Position is required to assist in the inspection, acceptance, and/or rejection of work performed in a particular discipline in compliance with applicable codes and/or specifications as dictated by quality programs and/or contract documents and specifications.
Structural Inspection Experience level must fall within the erection of structural steel. Must be able to work in elevated areas. Must have knowledge of AISC, AWS D1.1, and AWS D1.6 Codes. Must have knowledge of bolt up inspection including bolt lot verifications using Skidmore-Wilhelm. Additionally, must have knowledge of architectural, insulation and lagging, grout and concrete placement, Epoxy anchor installation inspection. Must have CWI (Certified Welding Inspector) certification.
Electrical and Instrumentation Inspection Experience must fall in the installation of electrical and instrumentation components, including interconnecting wiring, cables, and tubing. Must be knowledgeable of ICEA, IEEE, ISA, NEC, NEMA, NESC, and NFPA Codes and standards.
Mechanical Inspection Experience level must fall in the setting and alignment of static and rotating equipment, equipment skids, coolers, tanks, and interconnecting process piping fabrication and installation. Must be able to use measuring tools such as micrometers, calipers, transits, etc. and be able to set up dial indicators and laser alignment devices.
Piping Inspection Experience level must fall in pipe installation inspection, including welding, supports, instrumentation, etc. Must have CWI (Certified Welding Inspector) certification.
Key Responsibilities
Assists material handling personnel with required material storage and PM requirements as needed.
Communicates with others regarding inspection results and recommends corrective procedures.
Participates in activities to support the company’s strategic planning efforts.
Participates in the preparation of Quality control ITP.
Performs control measuring and tests equipment.
Verifies the installation of the systems, components and equipment in accordance with the assigned discipline.
Minimum Job Requirements
1+ year construction practices
1+ year in quality control inspection discipline
HS Degree Required
Proficient use of all Microsoft Office Suite programs
Physical Requirements
Ability to wear personal protective equipment is required (including but not limited to steel toed shoes, gloves, safety glasses, hearing protection, hardhat, vest, etc.)
May reach above shoulder heights and below the waist on a frequent basis
May stoop, kneel, or bend, on an occasional basis
May use telephone, computer system, email, or other electronic devices on a limited basis to communicate with internal and external customers or vendors
Must be able to comply with all safety standards and procedures
Occasionally will climb stairs, ladders, etc.
Required to use hands to grasp, lift, handle, carry or feel objects on a frequent basis
Will interact with people frequently during a shift/work day
Will lift, push or pull objects on an occasional basis
Will sit, stand or walk short distances for up to the entire duration of a shift/work day.
Safety Level Safety-Sensitive
About Us As a 100% employee-owned contractor, when you work at Sundt, you’re not just hiring on at a company, you’re joining a culture. Because everyone at Sundt is part owner, you’ll join a team of people who are deeply invested in their work. From apprentices to managers, we’re passionate about the details and deliberate in everything we do.
At Sundt we focus on building long-term prosperity for our clients, communities and employee-owners. We offer competitive pay, industry-leading benefits including a 401k and employee stock ownership plan, incentive programs for craft and administrative employees as well as training that focuses on your personal and professional growth. We’re driven by skill, grit and purpose. Join us as we strive to be the most skilled builder in America.
Equal Opportunity Employer Statement Sundt is committed to the equal treatment of all employees, and/or applicants for employment, and prohibits discrimination based on race, religion, sex (including pregnancy), sexual orientation, gender identity, color, age, disability, national origin, covered veteran status, genetic information; or any other classification protected by applicable Federal, state, or local laws.
Benefits
Market Competitive Salary (paid weekly)
Bonus Eligibility based on company, group, and individual performance
Employee Stock Ownership Plan & 401K
Industry Leading Health Coverage Starting Your First Day
Flexible Time Off (FTO)
Medical, Health Savings, and Wellness credits
Flexible Spending Accounts
Employee Assistance Program
Workplace Wellness Programs
Mental Health Program
Life and Disability Insurance
Employee-Owner Perks
Educational Assistance
Sundt Foundation - Charitable Employee-Owner's program
Seniority Level
Entry level
Employment Type
Full-time
Job Function
Quality Assurance
Construction
Referrals increase your chances of interviewing at Sundt Construction by 2x
#J-18808-Ljbffr
Structural Inspection Experience level must fall within the erection of structural steel. Must be able to work in elevated areas. Must have knowledge of AISC, AWS D1.1, and AWS D1.6 Codes. Must have knowledge of bolt up inspection including bolt lot verifications using Skidmore-Wilhelm. Additionally, must have knowledge of architectural, insulation and lagging, grout and concrete placement, Epoxy anchor installation inspection. Must have CWI (Certified Welding Inspector) certification.
Electrical and Instrumentation Inspection Experience must fall in the installation of electrical and instrumentation components, including interconnecting wiring, cables, and tubing. Must be knowledgeable of ICEA, IEEE, ISA, NEC, NEMA, NESC, and NFPA Codes and standards.
Mechanical Inspection Experience level must fall in the setting and alignment of static and rotating equipment, equipment skids, coolers, tanks, and interconnecting process piping fabrication and installation. Must be able to use measuring tools such as micrometers, calipers, transits, etc. and be able to set up dial indicators and laser alignment devices.
Piping Inspection Experience level must fall in pipe installation inspection, including welding, supports, instrumentation, etc. Must have CWI (Certified Welding Inspector) certification.
Key Responsibilities
Assists material handling personnel with required material storage and PM requirements as needed.
Communicates with others regarding inspection results and recommends corrective procedures.
Participates in activities to support the company’s strategic planning efforts.
Participates in the preparation of Quality control ITP.
Performs control measuring and tests equipment.
Verifies the installation of the systems, components and equipment in accordance with the assigned discipline.
Minimum Job Requirements
1+ year construction practices
1+ year in quality control inspection discipline
HS Degree Required
Proficient use of all Microsoft Office Suite programs
Physical Requirements
Ability to wear personal protective equipment is required (including but not limited to steel toed shoes, gloves, safety glasses, hearing protection, hardhat, vest, etc.)
May reach above shoulder heights and below the waist on a frequent basis
May stoop, kneel, or bend, on an occasional basis
May use telephone, computer system, email, or other electronic devices on a limited basis to communicate with internal and external customers or vendors
Must be able to comply with all safety standards and procedures
Occasionally will climb stairs, ladders, etc.
Required to use hands to grasp, lift, handle, carry or feel objects on a frequent basis
Will interact with people frequently during a shift/work day
Will lift, push or pull objects on an occasional basis
Will sit, stand or walk short distances for up to the entire duration of a shift/work day.
Safety Level Safety-Sensitive
About Us As a 100% employee-owned contractor, when you work at Sundt, you’re not just hiring on at a company, you’re joining a culture. Because everyone at Sundt is part owner, you’ll join a team of people who are deeply invested in their work. From apprentices to managers, we’re passionate about the details and deliberate in everything we do.
At Sundt we focus on building long-term prosperity for our clients, communities and employee-owners. We offer competitive pay, industry-leading benefits including a 401k and employee stock ownership plan, incentive programs for craft and administrative employees as well as training that focuses on your personal and professional growth. We’re driven by skill, grit and purpose. Join us as we strive to be the most skilled builder in America.
Equal Opportunity Employer Statement Sundt is committed to the equal treatment of all employees, and/or applicants for employment, and prohibits discrimination based on race, religion, sex (including pregnancy), sexual orientation, gender identity, color, age, disability, national origin, covered veteran status, genetic information; or any other classification protected by applicable Federal, state, or local laws.
Benefits
Market Competitive Salary (paid weekly)
Bonus Eligibility based on company, group, and individual performance
Employee Stock Ownership Plan & 401K
Industry Leading Health Coverage Starting Your First Day
Flexible Time Off (FTO)
Medical, Health Savings, and Wellness credits
Flexible Spending Accounts
Employee Assistance Program
Workplace Wellness Programs
Mental Health Program
Life and Disability Insurance
Employee-Owner Perks
Educational Assistance
Sundt Foundation - Charitable Employee-Owner's program
Seniority Level
Entry level
Employment Type
Full-time
Job Function
Quality Assurance
Construction
Referrals increase your chances of interviewing at Sundt Construction by 2x
#J-18808-Ljbffr