USG
Join to apply for the
PLC, Automation, Controls Technician
role at
USG .
2 days ago – Be among the first 25 applicants.
Primary Function The incumbent provides advanced level experience and skillsets in the Technical Department of Otsego Paper LLC. The areas of responsibility include, but are not limited to, the setup, programming, diagnostics, and troubleshooting of the plant's PLC & DCS control systems to ensure proper and efficient utilization of equipment, materials and manpower – maximizing safety of personnel and reliability/performance of equipment.
Technical Department – PLC Technician – 3rd Shift The incumbent provides advanced level experience and skillsets in the Technical Department of Otsego Paper LLC. The areas of responsibility include, but are not limited to, the setup, programming, diagnostics, and troubleshooting of the plant's PLC & DCS control systems to ensure proper and efficient utilization of equipment, materials and manpower – maximizing safety of personnel and reliability/performance of equipment.
Basic Requirements
Must be able to perform this job safely.
Must be capable of carrying on-call phone and working weekends without assistance.
Advanced experience with industrial programming, instrumentation, and electrical trades.
Advanced computer skills (Microsoft Office suite, spreadsheets, data entry, etc.)
Maintain safe working conditions for department and ensure compliance with Plant Safety Programs.
Maintain well organized and accurate records relating to equipment maintenance, process efficiency, government agency reports, permits and material requisitions.
Can read, follow, and modify drawings for large, complex system P&ID’s, system loops, pneumatic/hydraulic schematics, electrical one‑lines, mass and energy balances, etc. without assistance.
Display advanced competencies in the following areas: communication, decision making/problem solving, energy, drive, ambition, job knowledge, leadership, managing conflict/negotiation, managing resources, and work quality.
Advanced experience with manufacturing instrumentation systems and control panels including adherence to NFPA codes.
Assist with management of all control systems in the mill: maintenance of all equipment, RPM program requirements, all inspections and SAR requirements.
Electrical Experience – Intermediate Level: wiring diagrams and schematics, residential voltage systems (115/230 V), industrial voltage systems (3 phase 480/2400 V), switchgear, circuit breakers, fusing, motor starters, heaters, pilot circuitry, pushbuttons, timers and devices, VFD setup, operation, maintenance, and troubleshooting.
Instrumentation Experience – Advanced Level: VDC and 4‑20 ma sensors and control devices for pressure, flow, temperature, position, voltage, current, strains, consistency, etc.; pneumatic control systems (valves/solenoids, positioners, pressures, flows, guides, etc.); hydraulic control systems; steam control systems; wiring diagrams and schematics.
Process Control Experience – Advanced Level: PLC setup, programming, and troubleshooting for Ladder Logic and Sequential Function Chart environments (Rockwell, Automation Direct); DCS/SCADA setup, programming, and troubleshooting in Function Block and Structured Text environments (Foxboro, Ignition); HMI setup, programming, and troubleshooting (Rockwell, Ignition, Foxboro); networking of IP devices and understanding of protocols (Ethernet‑IP, TCP/IP, Modbus TCP, etc.); PID control loops and tuning; experience with safety systems; integration with legacy systems; upgrades to existing; basic knowledge of codes.
Job Procedures And Requirements Reporting to the Technical Manager, the incumbent is highly experienced in industrial programming, instrumentation, and electrical trades. They must continually elicit a high standard of safety performance for themselves. The PLC Technician 3 must be proficient in all aspects of the mill control systems and instrumentation.
The incumbent is responsible for assisting with the development and maintenance of the control systems in the mill, powerhouse, and waste treatment. They must possess a high degree of technical aptitude and in‑depth knowledge of manufacturing process controls and instrumentation systems, stay abreast of new technologies, and work with the engineering group to plan and implement new capital projects within their area of expertise.
They must demonstrate a solid understanding of mill processes and how the control systems impact the process, be able to access all control systems, troubleshoot, and make programming changes without any oversight. The incumbent is capable of taking high‑level concepts from customers and implementing them within their respective area.
They must also be fully proficient and display an advanced level in troubleshooting equipment malfunctions, preventive maintenance work, and routine equipment repairs and overhauls with no oversight.
The incumbent will be a key stakeholder on teams for implementing repair and upgrade projects within their respective department, including planning, part specification, coordination, supervision, and successful implementation utilizing both in‑house and third‑party contractor resources.
Qualifications
Licensed Electrician in the State of Michigan preferred.
3‑5+ Years Industrial Controls and Instrumentation/Electrical Experience.
USG Safety Model Program, OSHA, FM Global, and Environmental compliance experience preferred.
USG RPM program experience preferred.
No significant performance/attendance infractions within the last 36 months.
Must be able to perform all tasks required in the subsequent positions.
Rate of pay may be adjusted based on the qualifications and experience of the candidate.
USG employees enjoy a number of benefit options for themselves and their families, including two medical insurance options, vision and dental coverage, a 401(k) investment plan with company match, a pension plan, and optional programs such as life insurance, accident insurance, legal insurance, and pet insurance.
USG also offers quarterly (hourly) / annual (salary) bonus potential for all employees based on performance metrics tied to safety, quality, and productivity. Employees receive paid time off and paid holidays.
Since 1902, Chicago‑based USG has been a leader in producing innovative, award‑winning products and systems to build everything from major commercial developments and residential housing to home improvements. USG's employees are committed to the highest levels of customer satisfaction and quality in everything we do. Our steadfast commitment to the company's core business values – innovation, quality, integrity, service, diversity, efficiency and safety – has helped us become the company we are today.
EOE including disability/veteran.
Headquartered in Chicago, we serve construction markets around the world with wall, ceiling, flooring, sheathing and roofing products that enable our customers to build the outstanding spaces where people live, work and play. Our network of plants, mines, quarries and other facilities includes 49 manufacturing locations and over 7,500 employees across North America.
Referrals increase your chances of interviewing at USG by 2x.
Get notified about new Control Technician jobs in Otsego, MN.
#J-18808-Ljbffr
PLC, Automation, Controls Technician
role at
USG .
2 days ago – Be among the first 25 applicants.
Primary Function The incumbent provides advanced level experience and skillsets in the Technical Department of Otsego Paper LLC. The areas of responsibility include, but are not limited to, the setup, programming, diagnostics, and troubleshooting of the plant's PLC & DCS control systems to ensure proper and efficient utilization of equipment, materials and manpower – maximizing safety of personnel and reliability/performance of equipment.
Technical Department – PLC Technician – 3rd Shift The incumbent provides advanced level experience and skillsets in the Technical Department of Otsego Paper LLC. The areas of responsibility include, but are not limited to, the setup, programming, diagnostics, and troubleshooting of the plant's PLC & DCS control systems to ensure proper and efficient utilization of equipment, materials and manpower – maximizing safety of personnel and reliability/performance of equipment.
Basic Requirements
Must be able to perform this job safely.
Must be capable of carrying on-call phone and working weekends without assistance.
Advanced experience with industrial programming, instrumentation, and electrical trades.
Advanced computer skills (Microsoft Office suite, spreadsheets, data entry, etc.)
Maintain safe working conditions for department and ensure compliance with Plant Safety Programs.
Maintain well organized and accurate records relating to equipment maintenance, process efficiency, government agency reports, permits and material requisitions.
Can read, follow, and modify drawings for large, complex system P&ID’s, system loops, pneumatic/hydraulic schematics, electrical one‑lines, mass and energy balances, etc. without assistance.
Display advanced competencies in the following areas: communication, decision making/problem solving, energy, drive, ambition, job knowledge, leadership, managing conflict/negotiation, managing resources, and work quality.
Advanced experience with manufacturing instrumentation systems and control panels including adherence to NFPA codes.
Assist with management of all control systems in the mill: maintenance of all equipment, RPM program requirements, all inspections and SAR requirements.
Electrical Experience – Intermediate Level: wiring diagrams and schematics, residential voltage systems (115/230 V), industrial voltage systems (3 phase 480/2400 V), switchgear, circuit breakers, fusing, motor starters, heaters, pilot circuitry, pushbuttons, timers and devices, VFD setup, operation, maintenance, and troubleshooting.
Instrumentation Experience – Advanced Level: VDC and 4‑20 ma sensors and control devices for pressure, flow, temperature, position, voltage, current, strains, consistency, etc.; pneumatic control systems (valves/solenoids, positioners, pressures, flows, guides, etc.); hydraulic control systems; steam control systems; wiring diagrams and schematics.
Process Control Experience – Advanced Level: PLC setup, programming, and troubleshooting for Ladder Logic and Sequential Function Chart environments (Rockwell, Automation Direct); DCS/SCADA setup, programming, and troubleshooting in Function Block and Structured Text environments (Foxboro, Ignition); HMI setup, programming, and troubleshooting (Rockwell, Ignition, Foxboro); networking of IP devices and understanding of protocols (Ethernet‑IP, TCP/IP, Modbus TCP, etc.); PID control loops and tuning; experience with safety systems; integration with legacy systems; upgrades to existing; basic knowledge of codes.
Job Procedures And Requirements Reporting to the Technical Manager, the incumbent is highly experienced in industrial programming, instrumentation, and electrical trades. They must continually elicit a high standard of safety performance for themselves. The PLC Technician 3 must be proficient in all aspects of the mill control systems and instrumentation.
The incumbent is responsible for assisting with the development and maintenance of the control systems in the mill, powerhouse, and waste treatment. They must possess a high degree of technical aptitude and in‑depth knowledge of manufacturing process controls and instrumentation systems, stay abreast of new technologies, and work with the engineering group to plan and implement new capital projects within their area of expertise.
They must demonstrate a solid understanding of mill processes and how the control systems impact the process, be able to access all control systems, troubleshoot, and make programming changes without any oversight. The incumbent is capable of taking high‑level concepts from customers and implementing them within their respective area.
They must also be fully proficient and display an advanced level in troubleshooting equipment malfunctions, preventive maintenance work, and routine equipment repairs and overhauls with no oversight.
The incumbent will be a key stakeholder on teams for implementing repair and upgrade projects within their respective department, including planning, part specification, coordination, supervision, and successful implementation utilizing both in‑house and third‑party contractor resources.
Qualifications
Licensed Electrician in the State of Michigan preferred.
3‑5+ Years Industrial Controls and Instrumentation/Electrical Experience.
USG Safety Model Program, OSHA, FM Global, and Environmental compliance experience preferred.
USG RPM program experience preferred.
No significant performance/attendance infractions within the last 36 months.
Must be able to perform all tasks required in the subsequent positions.
Rate of pay may be adjusted based on the qualifications and experience of the candidate.
USG employees enjoy a number of benefit options for themselves and their families, including two medical insurance options, vision and dental coverage, a 401(k) investment plan with company match, a pension plan, and optional programs such as life insurance, accident insurance, legal insurance, and pet insurance.
USG also offers quarterly (hourly) / annual (salary) bonus potential for all employees based on performance metrics tied to safety, quality, and productivity. Employees receive paid time off and paid holidays.
Since 1902, Chicago‑based USG has been a leader in producing innovative, award‑winning products and systems to build everything from major commercial developments and residential housing to home improvements. USG's employees are committed to the highest levels of customer satisfaction and quality in everything we do. Our steadfast commitment to the company's core business values – innovation, quality, integrity, service, diversity, efficiency and safety – has helped us become the company we are today.
EOE including disability/veteran.
Headquartered in Chicago, we serve construction markets around the world with wall, ceiling, flooring, sheathing and roofing products that enable our customers to build the outstanding spaces where people live, work and play. Our network of plants, mines, quarries and other facilities includes 49 manufacturing locations and over 7,500 employees across North America.
Referrals increase your chances of interviewing at USG by 2x.
Get notified about new Control Technician jobs in Otsego, MN.
#J-18808-Ljbffr