High Purity Silicon America Corp
Description
Job Summary The Finishing Operator works in a high production rate environment processing polysilicon final product while exhibiting a high level of commitment to maintaining company safety and quality standards.
Essential Duties/Responsibilities
Work inside of clean room environment requiring don and doff of dedicated clean room garments 6 times per day as well as PPE for cut / puncture protection
Size, sort, visually inspect, & weigh to 11-lbs small, sharp, rock-like pieces for defects within different customer specifications
Maintain product and operating supply inventories
Operation of static & in-motion weigh scales and bag sealers
Organize and maintain inspection paperwork
Ensure product tracking and traceability of all lot data groups of baskets through the inspection process
Keep work area clean throughout the day and before leaving shift
Maintain electronic records of seed/bridge production, including lot numbers, quantities and seed lengths using MS excel and Label Station.
Frequent changes of plastic sheeting and gloves for product protection
Additional Duties/Responsibilities
Inspect baskets and carts for defects
Move emptied carts and baskets to upstream areas
Operate label station
Perform seed and cut rod inspections
Perform clean room maintenance and cleaning
Evaluate the logistics of material flow through process areas to ensure operational efficiency
Move 50-lb baskets of P-Si between carts for sorting and staging product
Work around moving parts
Additional duties as assigned
Required Skills/Abilities
Ability to learn and perform repair tasks on equipment
Exceptional attention to detail
Understanding of how to use calipers, a tape measure, rulers, etc. for measuring and checking finished work
Data entry and retrieval from MS office (Word and Excel) and the use of computer software including DCS, AspenTech, LabelStation
Ability to work weekends and holidays as needed
Proficiency in basic math such as addition, subtraction, multiplication, division, percentage, and average calculations
Ability to work with 2 other operators in a 10 x 10-ft area while twisting & maneuvering around carts and tables
Requirements Education and Experience High School Diploma or equivalent; further education and certifications such as Chemical Operator, AIDT, ISO 9001 and/or 14001 are preferred
Physical Requirements
Ability to stand for the majority of an 8-hour shift
Ability to stand at approximately 4-ft height inspection tablePush / pull and maneuver approximately 230-lb carts through crowded spaces
Bend to Lift up to 50 lbs. from below the waist to approximate 4-ft height while twisting
Lift and twist while holding 11-lb bags during course of shift (up to approximately 180 bags)
Ability to retrieve product from floor level and reach elevated surfaces during cleaning
Expect to manually handle approximately 2000-lbs per day as inspection operator and 14,000 lbs per day as a label station operator
Inspect, weigh, and seal approximately 25-lb cylindrical P-Si rods while standing
Inspect, weight, and seal seed products weighing approximately 10-lbs in bundles of 16
#J-18808-Ljbffr
Job Summary The Finishing Operator works in a high production rate environment processing polysilicon final product while exhibiting a high level of commitment to maintaining company safety and quality standards.
Essential Duties/Responsibilities
Work inside of clean room environment requiring don and doff of dedicated clean room garments 6 times per day as well as PPE for cut / puncture protection
Size, sort, visually inspect, & weigh to 11-lbs small, sharp, rock-like pieces for defects within different customer specifications
Maintain product and operating supply inventories
Operation of static & in-motion weigh scales and bag sealers
Organize and maintain inspection paperwork
Ensure product tracking and traceability of all lot data groups of baskets through the inspection process
Keep work area clean throughout the day and before leaving shift
Maintain electronic records of seed/bridge production, including lot numbers, quantities and seed lengths using MS excel and Label Station.
Frequent changes of plastic sheeting and gloves for product protection
Additional Duties/Responsibilities
Inspect baskets and carts for defects
Move emptied carts and baskets to upstream areas
Operate label station
Perform seed and cut rod inspections
Perform clean room maintenance and cleaning
Evaluate the logistics of material flow through process areas to ensure operational efficiency
Move 50-lb baskets of P-Si between carts for sorting and staging product
Work around moving parts
Additional duties as assigned
Required Skills/Abilities
Ability to learn and perform repair tasks on equipment
Exceptional attention to detail
Understanding of how to use calipers, a tape measure, rulers, etc. for measuring and checking finished work
Data entry and retrieval from MS office (Word and Excel) and the use of computer software including DCS, AspenTech, LabelStation
Ability to work weekends and holidays as needed
Proficiency in basic math such as addition, subtraction, multiplication, division, percentage, and average calculations
Ability to work with 2 other operators in a 10 x 10-ft area while twisting & maneuvering around carts and tables
Requirements Education and Experience High School Diploma or equivalent; further education and certifications such as Chemical Operator, AIDT, ISO 9001 and/or 14001 are preferred
Physical Requirements
Ability to stand for the majority of an 8-hour shift
Ability to stand at approximately 4-ft height inspection tablePush / pull and maneuver approximately 230-lb carts through crowded spaces
Bend to Lift up to 50 lbs. from below the waist to approximate 4-ft height while twisting
Lift and twist while holding 11-lb bags during course of shift (up to approximately 180 bags)
Ability to retrieve product from floor level and reach elevated surfaces during cleaning
Expect to manually handle approximately 2000-lbs per day as inspection operator and 14,000 lbs per day as a label station operator
Inspect, weigh, and seal approximately 25-lb cylindrical P-Si rods while standing
Inspect, weight, and seal seed products weighing approximately 10-lbs in bundles of 16
#J-18808-Ljbffr