TEKsystems
Apply for the
Travel Cable Technician
role at
TEKsystems .
Job Summary We are accepting applications for Travel Technicians to work at various locations across the United States. This job is 100% travel and will consist of installing low voltage wiring and equipment such as IP cameras, Wireless Access Points, Routers, Switches, etc. Qualified candidates should expect to be on the road anywhere from 2 – 8 months at a time.
Self‑starter who can work well with a partner 6 days a week. The Travel Technician will be teamed up with a partner who will travel and work with them for the duration of the project. If you have someone in mind that you would want to travel with, we would consider them as well.
Responsibilities
Pull and terminate low voltage cable.
Install network equipment within commercial settings.
Follow instructions and code when pulling cable.
Run low voltage cabling in commercial buildings, including drilling concrete walls and limited conduit work.
Ensure all cables are neatly tied and bundled according to safety regulations.
Install cable support structures such as j-hooks, cable racks, and inner duct.
Conduct tests to ensure all newly installed cable systems and component devices are operational.
Troubleshoot issues with the cable network.
Perform any other duties not specifically stated herein, but which your supervisor may assign.
Adhere to all required project safety requirements as set forth by the client, their customers, or OSHA.
Skills low voltage, installation, wap, install, cctv, cable, cat5, cat6, Cabling, Cable installation, Cable puller, wireless access point, access control, punchdown, telecommunication, troubleshooting
Requirements
Experience as a Data Cable Technician.
Available for extensive travel nationwide.
Ability to prioritize tasks.
Able to lift and carry 50 pounds or more multiple times per shift.
Ability to work in cramped spaces.
Hours of project 7 pm - 7 am 5 days a week.
Ability and willingness to travel to Lowell, AR for new hire orientation.
100% travel of the USA.
Ability and willingness to operate a scissor lift and work at heights.
Able to fill out the work order and take care of the tools provided by the office to do the job.
Abide by PPE requirements. Company provides hard hat, vest, and safety glasses. Must provide your own steel‑toed boots.
Tools required by the technicians: hand tools, screwdrivers (both standard and Phillips), snips, punch down (impact), toner and probe, pliers, adjustable wrenches, joint pliers, and lineman pliers.
Valid driver's license with a clean driving record; no DUI or DWI in the last three years.
Benefits
Per‑Diem paid $125 a day for food and lodging (or alternatively lodging can be prepaid booked for you and in that case per diem is $45/day to cover food).
Company vehicle provided (traveling with a partner).
Pay & Benefits The pay range for this position is $19.00 - $22.00/hr.
Medical, dental & vision
Critical Illness, Accident, and Hospital
401(k) Retirement Plan – Pre‑tax and Roth post‑tax contributions available
Life Insurance (Voluntary Life &D for the employee and dependents)
Short and long‑term disabilityHealth Spending Account (HSA)
Transportation benefits
Employee Assistance Program
Time Off/Leave (PTO, Vacation or Sick Leave)
Employment Details Contract position based out of Dallas, TX. Workplace Type: Fully onsite position in Dallas, TX.
Application Deadline Application Deadline: Jan 12, 2026.
The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.
#J-18808-Ljbffr
Travel Cable Technician
role at
TEKsystems .
Job Summary We are accepting applications for Travel Technicians to work at various locations across the United States. This job is 100% travel and will consist of installing low voltage wiring and equipment such as IP cameras, Wireless Access Points, Routers, Switches, etc. Qualified candidates should expect to be on the road anywhere from 2 – 8 months at a time.
Self‑starter who can work well with a partner 6 days a week. The Travel Technician will be teamed up with a partner who will travel and work with them for the duration of the project. If you have someone in mind that you would want to travel with, we would consider them as well.
Responsibilities
Pull and terminate low voltage cable.
Install network equipment within commercial settings.
Follow instructions and code when pulling cable.
Run low voltage cabling in commercial buildings, including drilling concrete walls and limited conduit work.
Ensure all cables are neatly tied and bundled according to safety regulations.
Install cable support structures such as j-hooks, cable racks, and inner duct.
Conduct tests to ensure all newly installed cable systems and component devices are operational.
Troubleshoot issues with the cable network.
Perform any other duties not specifically stated herein, but which your supervisor may assign.
Adhere to all required project safety requirements as set forth by the client, their customers, or OSHA.
Skills low voltage, installation, wap, install, cctv, cable, cat5, cat6, Cabling, Cable installation, Cable puller, wireless access point, access control, punchdown, telecommunication, troubleshooting
Requirements
Experience as a Data Cable Technician.
Available for extensive travel nationwide.
Ability to prioritize tasks.
Able to lift and carry 50 pounds or more multiple times per shift.
Ability to work in cramped spaces.
Hours of project 7 pm - 7 am 5 days a week.
Ability and willingness to travel to Lowell, AR for new hire orientation.
100% travel of the USA.
Ability and willingness to operate a scissor lift and work at heights.
Able to fill out the work order and take care of the tools provided by the office to do the job.
Abide by PPE requirements. Company provides hard hat, vest, and safety glasses. Must provide your own steel‑toed boots.
Tools required by the technicians: hand tools, screwdrivers (both standard and Phillips), snips, punch down (impact), toner and probe, pliers, adjustable wrenches, joint pliers, and lineman pliers.
Valid driver's license with a clean driving record; no DUI or DWI in the last three years.
Benefits
Per‑Diem paid $125 a day for food and lodging (or alternatively lodging can be prepaid booked for you and in that case per diem is $45/day to cover food).
Company vehicle provided (traveling with a partner).
Pay & Benefits The pay range for this position is $19.00 - $22.00/hr.
Medical, dental & vision
Critical Illness, Accident, and Hospital
401(k) Retirement Plan – Pre‑tax and Roth post‑tax contributions available
Life Insurance (Voluntary Life &D for the employee and dependents)
Short and long‑term disabilityHealth Spending Account (HSA)
Transportation benefits
Employee Assistance Program
Time Off/Leave (PTO, Vacation or Sick Leave)
Employment Details Contract position based out of Dallas, TX. Workplace Type: Fully onsite position in Dallas, TX.
Application Deadline Application Deadline: Jan 12, 2026.
The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.
#J-18808-Ljbffr