Dover Corporation
Machinist I - 2nd Shift
Location: Skokie, IL, US
Onsite
Overview The Machinist will operate CNC lathes and mills in support of machining and other manufacturing process operations.
Primary Responsibilities/Essential Responsibilities
Machine operation involves loading and tending runs of parts, or performing one-step operations on individual parts
Positions and secures tools in holding device, machine tables, chuck, centers, and fixtures
Verifies conformance of machined work piece to specifications
Reads blueprints, job orders, tooling instructions, and standard charts for such specifications as dimensions, tolerances, and tooling instructions
Understand and perform to all quality regulations, standards and policies, including but not limited to ISO 9001:2015 and AAR M-1003. Follow work procedures and ensure highest level of quality
Indexes turret and adjusts positions of tools at each station in relation to work piece to assure clearance between moving parts and machining of specified dimensions and tolerances
Starts and observes machine operation to detect malfunctions or out-of-tolerance machining, and adjusts machine controls or control media as required
Pressure test parts according to drawing or work procedure.
Performs housekeeping duties including 5S, coolant replacement, and TPM
Must be able to perform simple inspection using calipers, micrometers, and other miscellaneous gauges
May participate in defining strategies to meet quality objectives and in system reviews within the team
Qualifications/Requirements
High school diploma or GED
3+ years direct CNC experience or formal CNC training from accredited program combined with 1+ years experience post training
Must be able to run CNC equipment in one cell, including:
Change jaws
Change tools/touch off
Lad program
Run first piece and make adjustments based on quality inspection
Desired Characteristics, Competence and Capabilities
Must possess proficient reading, writing, and computation skills
Must possess good manual dexterity and hand-eye coordination
Ability to work effectively in a fast-paced environment
Prior experience with multi‑axis CNC equipment highly desirable
Physical Demands and Environmental Conditions
While performing the duties of this job, the team member is continuously standing, repetitively grasping and repetitively using fine manipulation with the hands. The team member may be frequently required to walk, bend, squat, or twist as well as repetitively push or pull. The team member must be able to lift 10‑20 pounds frequently and up to 50 pounds occasionally with assistance
This position is performed in a manufacturing environment. Team members in this position may be exposed to loud operating machinery, cold temperatures, hot temperatures, chemicals and vapors. The team member may occasionally be required to work in an office environment
Bench‑type or floor‑mounted machines (e.g. drill presses, grinders, broaches, screw machines, manual and CNC mills and lathes, saws, shrink‑wrap machines, etc.) hand and power tools, measuring instruments, hoist, lifts, and lift trucks.
Work Arrangement Onsite
Pay Range $25.75 - $38.00
Benefits Benefits for this position include: a 401(k) savings plan with employer contributions; medical, dental and vision insurance; wellness programs; health savings account, health care and dependent care flexible spending accounts; company paid short‑term disability and long‑term disability; company paid employee basic life and AD&D insurance; supplemental employee and dependent life insurance; optional accident, hospital indemnity and critical illness insurance; adoption, surrogacy, and fertility benefits and assistance; commuter benefits; parental, military, jury duty, and bereavement leaves of absence; paid time off, including 10 paid holidays per calendar year; paid vacation days beginning at 120 hours annually; 40 paid sick leave hours annually or as provided under state and local paid sick leave laws; tuition assistance is available; business travel services; employee discounts; and an employee assistance program that includes company paid counseling sessions and legal services. Eligibility for benefits is governed by applicable plan documents and policies.
EEO Statement All qualified applicants will receive consideration for employment without discrimination on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, disability, age, genetic information, or any other factors prohibited by law.
Accommodation Statement Attention Applicants: If you are an individual with a disability and require a reasonable accommodation to complete any part of the application process, please let us know. Likewise, if you are limited in the ability to access or use this online application process and need an alternative method for applying, we will determine an alternate way for you to apply. Please contact opwaccommodations@acmecryo.com for assistance with an accommodation. Kindly specify Job Requisition Number / Job Title and Location in response.
Job Function Manufacturing & Operations
#J-18808-Ljbffr
Onsite
Overview The Machinist will operate CNC lathes and mills in support of machining and other manufacturing process operations.
Primary Responsibilities/Essential Responsibilities
Machine operation involves loading and tending runs of parts, or performing one-step operations on individual parts
Positions and secures tools in holding device, machine tables, chuck, centers, and fixtures
Verifies conformance of machined work piece to specifications
Reads blueprints, job orders, tooling instructions, and standard charts for such specifications as dimensions, tolerances, and tooling instructions
Understand and perform to all quality regulations, standards and policies, including but not limited to ISO 9001:2015 and AAR M-1003. Follow work procedures and ensure highest level of quality
Indexes turret and adjusts positions of tools at each station in relation to work piece to assure clearance between moving parts and machining of specified dimensions and tolerances
Starts and observes machine operation to detect malfunctions or out-of-tolerance machining, and adjusts machine controls or control media as required
Pressure test parts according to drawing or work procedure.
Performs housekeeping duties including 5S, coolant replacement, and TPM
Must be able to perform simple inspection using calipers, micrometers, and other miscellaneous gauges
May participate in defining strategies to meet quality objectives and in system reviews within the team
Qualifications/Requirements
High school diploma or GED
3+ years direct CNC experience or formal CNC training from accredited program combined with 1+ years experience post training
Must be able to run CNC equipment in one cell, including:
Change jaws
Change tools/touch off
Lad program
Run first piece and make adjustments based on quality inspection
Desired Characteristics, Competence and Capabilities
Must possess proficient reading, writing, and computation skills
Must possess good manual dexterity and hand-eye coordination
Ability to work effectively in a fast-paced environment
Prior experience with multi‑axis CNC equipment highly desirable
Physical Demands and Environmental Conditions
While performing the duties of this job, the team member is continuously standing, repetitively grasping and repetitively using fine manipulation with the hands. The team member may be frequently required to walk, bend, squat, or twist as well as repetitively push or pull. The team member must be able to lift 10‑20 pounds frequently and up to 50 pounds occasionally with assistance
This position is performed in a manufacturing environment. Team members in this position may be exposed to loud operating machinery, cold temperatures, hot temperatures, chemicals and vapors. The team member may occasionally be required to work in an office environment
Bench‑type or floor‑mounted machines (e.g. drill presses, grinders, broaches, screw machines, manual and CNC mills and lathes, saws, shrink‑wrap machines, etc.) hand and power tools, measuring instruments, hoist, lifts, and lift trucks.
Work Arrangement Onsite
Pay Range $25.75 - $38.00
Benefits Benefits for this position include: a 401(k) savings plan with employer contributions; medical, dental and vision insurance; wellness programs; health savings account, health care and dependent care flexible spending accounts; company paid short‑term disability and long‑term disability; company paid employee basic life and AD&D insurance; supplemental employee and dependent life insurance; optional accident, hospital indemnity and critical illness insurance; adoption, surrogacy, and fertility benefits and assistance; commuter benefits; parental, military, jury duty, and bereavement leaves of absence; paid time off, including 10 paid holidays per calendar year; paid vacation days beginning at 120 hours annually; 40 paid sick leave hours annually or as provided under state and local paid sick leave laws; tuition assistance is available; business travel services; employee discounts; and an employee assistance program that includes company paid counseling sessions and legal services. Eligibility for benefits is governed by applicable plan documents and policies.
EEO Statement All qualified applicants will receive consideration for employment without discrimination on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, disability, age, genetic information, or any other factors prohibited by law.
Accommodation Statement Attention Applicants: If you are an individual with a disability and require a reasonable accommodation to complete any part of the application process, please let us know. Likewise, if you are limited in the ability to access or use this online application process and need an alternative method for applying, we will determine an alternate way for you to apply. Please contact opwaccommodations@acmecryo.com for assistance with an accommodation. Kindly specify Job Requisition Number / Job Title and Location in response.
Job Function Manufacturing & Operations
#J-18808-Ljbffr