Careersinfood
Facilities Maintenance Technician - $36.39/hr - M-F 9am-5pm
Careersinfood, Traverse City, Michigan, United States, 49685
The Facilities Maintenance Technician for Materne North America is responsible for performing maintenance for the plant utility equipment, buildings and grounds, including preventive maintenance checks, repair work, and operating the utility equipment.
Job Responsibilities & Tasks Computer Work:
Completion of work orders and documenting reports in the CMMS
Document inventory check outs and create purchase requisitions in the CMMS
Login to automated reporting systems for air compressors and other utilities systems
Understand and operate equipment via HMI's for waste water, air compressors and incoming water
Refrigeration:
Perform equipment inspections
Check daily oil levels, temperatures, pressure and on equipment
Waste Water Treatment:
Maintain waste water treatment plant building and equipment including pumps, motors, valves, piping, floats, controls, flow meters, as well as chemical pumps and tanks (confined space entry is required)
Perform preventive maintenance on all equipment in WWTP
Clear paths for winter ground water samples
Maintain waste water rapid infiltration basins
Water Treatment:
Perform daily checks of well pressures, tanks, plumbing, and temperatures
Repair any leaks
Perform daily checks on equipment in the green sand iron removal building
Perform daily checks for water softener hardness and iron levels of the outgoing water
Change out water filters
Gather and record daily meter readings from water supply for the water softeners in the process and boiler feed system
Perform quarterly and annual sampling of the water supply
Install new water supply as needed to new processes
Maintain the chlorine injection system
Air supply system and air compressors:
Complete preventive and correct air compressor maintenance (both daily and annual)
Maintain Refrigerated air dryers and air filters
Interact with and maintain flow meters, computerized monitoring system, moisture monitor
Boilers, condensate, and steam systems:
Perform daily safety checks
Perform daily checks on water flow, meter readings, temperatures, pressures and boiler conditions
Maintain deaerator system including feed water pumps, suction strainers, and PRV and controls
Check and adjust to boiler, condensate, and water softener water analysis
Do preventive maintenance on floats, controls, condensate pumps, steam traps, and valves
Repair steam leaks on piping as necessary
Prepare for annual inspections by performing the shutting off, teardown, and cleaning of the boilers
Start-up and operate the natural gas boilers
Natural Gas and Nitrogen:
Complete weekly meter readings
Maintain piping after the meter
Perform equipment maintenance or replacement
Fire System:
Work with contractor on troubleshooting and repairs
Perform weekly churn testing on fire suppression pump and system
Assure the heater and the propane are maintained for emergency generator and exercise monthly
General Buildings and Grounds:
Complete building maintenance as requested
Perform roof maintenance as needed
Perform meter readings on plant electrical equipment
Complete electrical repairs and troubleshooting
Complete preventive and corrective maintenance on dock locks and levelers
Complete preventive and corrective maintenance on overhead doors and man doors
Fix floors and drains
Complete preventive and corrective maintenance on HVAC units, air handling equipment, and ducts
Maintain septic systems for the facility
Complete maintenance on the lighting throughout the facility
Complete preventive and corrective maintenance on battery chargers and associated equipment for changing stations
Repair warehouse racking
Key Performance Indicator (KPI)
Amount of work orders completed
Uptime of utilities equipment to support the production facility
Position Requirements EDUCATION:
High School Diploma
EXPERIENCE:
1-3 Years of previous facilities and utilities maintenance
Previous experience in the food industry is a plus
Experience with Microsoft Office Suite and CMMS
SKILLS:
Adequate organizational skills
Adequate communication skills
Ability to express priorities and needs in both written and verbal form
Must show a willingness to receive vendor supplied training for utilities technology to further education
Must have basic understanding of operating and maintaining utilities equipment
Formal education and training on maintaining utilities equipment a plus
Strong mechanical and/or electrical background
Strong troubleshooting ability
PHYSICAL & TRAVEL REQUIREMENTS:
Must be able to work a minimum of 8 hours per day and be on his/her feet for extended periods of time
#J-18808-Ljbffr
Job Responsibilities & Tasks Computer Work:
Completion of work orders and documenting reports in the CMMS
Document inventory check outs and create purchase requisitions in the CMMS
Login to automated reporting systems for air compressors and other utilities systems
Understand and operate equipment via HMI's for waste water, air compressors and incoming water
Refrigeration:
Perform equipment inspections
Check daily oil levels, temperatures, pressure and on equipment
Waste Water Treatment:
Maintain waste water treatment plant building and equipment including pumps, motors, valves, piping, floats, controls, flow meters, as well as chemical pumps and tanks (confined space entry is required)
Perform preventive maintenance on all equipment in WWTP
Clear paths for winter ground water samples
Maintain waste water rapid infiltration basins
Water Treatment:
Perform daily checks of well pressures, tanks, plumbing, and temperatures
Repair any leaks
Perform daily checks on equipment in the green sand iron removal building
Perform daily checks for water softener hardness and iron levels of the outgoing water
Change out water filters
Gather and record daily meter readings from water supply for the water softeners in the process and boiler feed system
Perform quarterly and annual sampling of the water supply
Install new water supply as needed to new processes
Maintain the chlorine injection system
Air supply system and air compressors:
Complete preventive and correct air compressor maintenance (both daily and annual)
Maintain Refrigerated air dryers and air filters
Interact with and maintain flow meters, computerized monitoring system, moisture monitor
Boilers, condensate, and steam systems:
Perform daily safety checks
Perform daily checks on water flow, meter readings, temperatures, pressures and boiler conditions
Maintain deaerator system including feed water pumps, suction strainers, and PRV and controls
Check and adjust to boiler, condensate, and water softener water analysis
Do preventive maintenance on floats, controls, condensate pumps, steam traps, and valves
Repair steam leaks on piping as necessary
Prepare for annual inspections by performing the shutting off, teardown, and cleaning of the boilers
Start-up and operate the natural gas boilers
Natural Gas and Nitrogen:
Complete weekly meter readings
Maintain piping after the meter
Perform equipment maintenance or replacement
Fire System:
Work with contractor on troubleshooting and repairs
Perform weekly churn testing on fire suppression pump and system
Assure the heater and the propane are maintained for emergency generator and exercise monthly
General Buildings and Grounds:
Complete building maintenance as requested
Perform roof maintenance as needed
Perform meter readings on plant electrical equipment
Complete electrical repairs and troubleshooting
Complete preventive and corrective maintenance on dock locks and levelers
Complete preventive and corrective maintenance on overhead doors and man doors
Fix floors and drains
Complete preventive and corrective maintenance on HVAC units, air handling equipment, and ducts
Maintain septic systems for the facility
Complete maintenance on the lighting throughout the facility
Complete preventive and corrective maintenance on battery chargers and associated equipment for changing stations
Repair warehouse racking
Key Performance Indicator (KPI)
Amount of work orders completed
Uptime of utilities equipment to support the production facility
Position Requirements EDUCATION:
High School Diploma
EXPERIENCE:
1-3 Years of previous facilities and utilities maintenance
Previous experience in the food industry is a plus
Experience with Microsoft Office Suite and CMMS
SKILLS:
Adequate organizational skills
Adequate communication skills
Ability to express priorities and needs in both written and verbal form
Must show a willingness to receive vendor supplied training for utilities technology to further education
Must have basic understanding of operating and maintaining utilities equipment
Formal education and training on maintaining utilities equipment a plus
Strong mechanical and/or electrical background
Strong troubleshooting ability
PHYSICAL & TRAVEL REQUIREMENTS:
Must be able to work a minimum of 8 hours per day and be on his/her feet for extended periods of time
#J-18808-Ljbffr