ValvTechnologies, LLC
BINGLE
Corporate Office
5904 Bingle
Houston, TX 77092, USA
To support ValvTechnologies welding production and inspections of all incoming and outgoing weldments and components. Also, to support ValvTechnologies inspection department in all upkeep of WQRs (welder qualification records) and PQRs (procedure qualification records) per applicable welding codes, standards and specifications. The inspector ensures production welds are performed per applicable WPS. He/she reviews and maintains welder continuity logs and ensures all welder and weld qualifications are current. Must maintain current CWI certification while employed at ValvTechnologies.
Job Responsibilities:
Test and inspect welds and cuts in accordance with established ValvTechnologies production and quality control guidelines
Strict technical specification and application/customer requirement compliance during production
Ensure welds are performed per all applicable welding procedures and requirements
Confirm that the materials to be worked on match the sales order document station provided by shop file, including parts identification and quantity of parts
Check order for accuracy and proper weld
Write sales order number and job number on parts if they are going out to vendor; if order is going to production, write sales order on pallet or bin
Housekeeping and thorough safety check of equipment required
Safety check of all gas equipment to be done each morning, with notification to Production Manager if any problems are found
Ensure all equipment, including gas cylinders/equipment, are properly stored and secured
May perform any other work-related functions as deemed necessary and appropriate by immediate supervisor
Complete all incoming and outgoing inspections of parts to the weld department
Assist Welding Manager with direction of welders and jobs in the weld shop
Handle all quality needs for welding QA, WO, dimensional checks etc.
Ensure weld maps are filled out correctly and all production components are hard-stamped using welder’s stencils
Basic Qualifications:
Must possess a current AWS CWI certification, or
Shall have previously held an AWS CWI certification with the ability to recertify within 60 days of employment
Desired/Preferred Qualifications:
Welding inspector shall be knowledgeable in ASME code standards such as B31.3, B31.1, Sec IX
Welding inspector shall be knowledgeable in structural welding codes such as AWS D1.1
Ability to interpret blueprints related to welding assemblies
Ability to use measuring tools such as dial calipers, height gauge, measuring tape, micrometers and ID & OD calipers
Knowledgeable in using Microsoft Office systems such as Excel and Word
Knowledgeable in other NDE methods such as RT, PT, UT and MT. Must be able to read and interpret RT films
Excellent written and verbal communication skills
Ability to work with product, manufacturing and production engineers to solve issues related to in-house production of parts related to welding
Serve as a workforce safety role model by consistently demonstrating safe work practices and behaviors; expect the same of others
Participate in the development and maintenance of a safe and healthy workplace
Comply with instructions given for your own safety and that of others by explicitly adhering to safe work practices and procedures; expect the same of others
Remain vigilant to and report any injury, hazard or illness immediately to supervisor or Safety Officer
Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.
#J-18808-Ljbffr
To support ValvTechnologies welding production and inspections of all incoming and outgoing weldments and components. Also, to support ValvTechnologies inspection department in all upkeep of WQRs (welder qualification records) and PQRs (procedure qualification records) per applicable welding codes, standards and specifications. The inspector ensures production welds are performed per applicable WPS. He/she reviews and maintains welder continuity logs and ensures all welder and weld qualifications are current. Must maintain current CWI certification while employed at ValvTechnologies.
Job Responsibilities:
Test and inspect welds and cuts in accordance with established ValvTechnologies production and quality control guidelines
Strict technical specification and application/customer requirement compliance during production
Ensure welds are performed per all applicable welding procedures and requirements
Confirm that the materials to be worked on match the sales order document station provided by shop file, including parts identification and quantity of parts
Check order for accuracy and proper weld
Write sales order number and job number on parts if they are going out to vendor; if order is going to production, write sales order on pallet or bin
Housekeeping and thorough safety check of equipment required
Safety check of all gas equipment to be done each morning, with notification to Production Manager if any problems are found
Ensure all equipment, including gas cylinders/equipment, are properly stored and secured
May perform any other work-related functions as deemed necessary and appropriate by immediate supervisor
Complete all incoming and outgoing inspections of parts to the weld department
Assist Welding Manager with direction of welders and jobs in the weld shop
Handle all quality needs for welding QA, WO, dimensional checks etc.
Ensure weld maps are filled out correctly and all production components are hard-stamped using welder’s stencils
Basic Qualifications:
Must possess a current AWS CWI certification, or
Shall have previously held an AWS CWI certification with the ability to recertify within 60 days of employment
Desired/Preferred Qualifications:
Welding inspector shall be knowledgeable in ASME code standards such as B31.3, B31.1, Sec IX
Welding inspector shall be knowledgeable in structural welding codes such as AWS D1.1
Ability to interpret blueprints related to welding assemblies
Ability to use measuring tools such as dial calipers, height gauge, measuring tape, micrometers and ID & OD calipers
Knowledgeable in using Microsoft Office systems such as Excel and Word
Knowledgeable in other NDE methods such as RT, PT, UT and MT. Must be able to read and interpret RT films
Excellent written and verbal communication skills
Ability to work with product, manufacturing and production engineers to solve issues related to in-house production of parts related to welding
Serve as a workforce safety role model by consistently demonstrating safe work practices and behaviors; expect the same of others
Participate in the development and maintenance of a safe and healthy workplace
Comply with instructions given for your own safety and that of others by explicitly adhering to safe work practices and procedures; expect the same of others
Remain vigilant to and report any injury, hazard or illness immediately to supervisor or Safety Officer
Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.
#J-18808-Ljbffr