ZipRecruiter
Job DescriptionJob Description
**Up to $4,500 sign-on bonusAttractive Relocation Bonus available for qualifying candidatesHighly competitive pay rates of up to $45 an hour based on skillsCutting-edge facility and impactful work
**
**Who We Want:
**Provide production support by performing setup, troubleshooting and operations of automated welding cells within a production facility, as well as implementing best practices and proactively assess welding/robotic applications.
What You'll Do:
Depending on experience: Mentor Automation Technician level I-III members as well as Weld Technicians
Ability to execute with proficiency all duties and responsibilities requirements of Automation technician III.
Follow all safety procedures and protocols while servicing or maintaining equipment.
Demonstrate advanced level proficiency in troubleshooting using electrical / mechanical prints.
Use electrical system knowledge and electrical schematics / prints to troubleshoot electrical components and circuits (Connecting circuit breakers, transformers, or other components in a junction box or panel). Perform tasks at an intermediate level with electrician supervision: Wiring harnesses, Drive systems, Relays, Boards Motors
Modify and perform intermediate programming tasks of robots in all robotic applications.
Perform basic offline programming using RoboCAD/Robot Studio. TCP Verification, I/O Simulation, Move Creation/Modification, Zone Setups.
Intermediate weld troubleshooting for all welding applications (drawn arc, GMAW, resistance welding, projection welding, Pneumatic systems, etc.).
Use the following equipment safely at an advanced level: Hand measuring tools, Multi meters, Amp meters, Welding current meter, Digital force gauge, Micro-Ohm meter
Fixture adjustments – minor shim moves on processes based off of manufacture details (with guidance from a Weld Maintenance Mechanic III or Manufacturing Engineer).
Understanding of shimming processes.
Setup and troubleshoot Poke Yoke systems and applications.
Automation Technician IV must demonstrate competency in (2) of the below specialties: PLC Programming, Intermediate PLC programming (add sensor & change sequence), Strong understanding of ladder logic and intermediate level ability to troubleshoot issues through a PLC, Program Panel View (HMI), Troubleshoot/ Setup I/O blocks, Search, cross reference, and edit a program, Troubleshoot HMI system, Load program, Replace components (i.e., logical module, screen, etc.), Replace system, set IP address, set system name, Troubleshoot Valve Stacks, Intermediate robot programming methods, Load ID, Gun Tuning, Adding system components (i.e., add valves/ I/O blocks)
Program robot offline (write routines)
Setup / troubleshoot issues with tool changers
Setup / troubleshoot issues with external axes
TCP creation and verification (experience with ABB Bullseye system is a plus)
Creating offset positions
Replace motors, resolvers, serial pulse coders
Intermediate Weld Troubleshooting
If needed, rebuild or reload schedules. Make changes as directed by Weld Engineers using RAFT
Emhart DA schedule changes as directed by Weld Engineers
Conduct preventive maintenance activities on specialty equipment
MIG weld schedule changes as directed by Weld Engineers
Cap / Electrode studies and weld validation
Calibrate squeeze force on spot weld guns
Troubleshoot Drawn Arc Stud Welding issues as well as basic programming
Troubleshoot/ setup projection welds
Working knowledge of Miyachi Weld Tester
**When and Where:
**Available Shifts:
1st shift
5:30am - 1:30pm M-F
2nd shift
1:30pm - 9:30pm M-F
3rd shift
9:30pm - 5:30am S-Th
Occasionally, this may require you to arrive early, stay late, or work on weekends, outside of our regular hours, to ensure we successfully meet customer needs, deadlines, or urgent requests.
What You Need to Have:
High School Diploma or equivalent (required)
Ability to obtain industrial truck and aerial platform licenses (required)
Excellent verbal communication skills (required)
Experience with Microsoft applications (i.e., word, excel, outlook, etc.)
Successful completion of Automation Technician II written and performance tests (internal candidates)
Successful completion of Automation Technician II written and performance tests (internal and external candidates)
Knowledge of PLC systems and Intermediate programming methods (required)
Industrial Maintenance / Machine Repair / Electrician Journeyman certification, or 2-year technical degree, or equivalent work experience (required)
Minimum 3 years of Weld Technician, Automation Technician, or equivalent experience (required)
Mechatronics certificate or journeyperson card ()
Associates degree in mechatronics, controls, maintenance technician ()
Minimum 10 years combined experience and education as an Automation Technician or Equivalent experience and education ()
Strong electrical and mechanical background in industrial and automated systems
Steel toed boots and hard hat required on site
Challenge Manufacturing is committed to working with and offering reasonable accommodations to job applicants with disabilities. If you need assistance or an accommodation due to a for any part of the recruitment process, please contact the respective Talent Acquisition Partner.
Challenge Manufacturing is an Equal Opportunity and Affirmative Action Employer. This company will provide equal opportunity to all individuals without regard to , , , , , , , , or veteran status. Information collected regarding categories as provided by law will in no way affect the decision regarding an employment application.
Challenge Manufacturing will not discharge or in any manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a forma complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with Challenge Manufacturing's legal duty to furnish information.
Due to customer requirements, it is prohibited by federal export control laws from transferring controlled information and technology to "Foreign Persons" except as specifically authorized by the U.S. government. In the absence of such authorization, access to controlled information or technology must be limited to "U.S. Persons." Accordingly, in order to comply with export control laws, the customer is required to verify a contractor's status as being either a "U.S. Person" or a " Foreign Person."
You should be proficient in:
PLC Troubleshooting Skills
Industrial and Manufacturing Engineering
Electrical Schematics
Troubleshooting Skills
CAD Software
Industrial Robot Programming
Troubleshooting Industrial Automation Equipment
Production Optimization
PLC Programming Experience
Electrical / Electronic Systems
Machines & technologies you'll use:
MIG Welder
TIG Welder
CNC Automation Solutions (Fanuc)
Automotive Vehicles
Robotic Welder
CAD Software
HMI
Industrial Robot (Kawasaki, Universal Robotics, Fanuc)
**Up to $4,500 sign-on bonusAttractive Relocation Bonus available for qualifying candidatesHighly competitive pay rates of up to $45 an hour based on skillsCutting-edge facility and impactful work
**
**Who We Want:
**Provide production support by performing setup, troubleshooting and operations of automated welding cells within a production facility, as well as implementing best practices and proactively assess welding/robotic applications.
What You'll Do:
Depending on experience: Mentor Automation Technician level I-III members as well as Weld Technicians
Ability to execute with proficiency all duties and responsibilities requirements of Automation technician III.
Follow all safety procedures and protocols while servicing or maintaining equipment.
Demonstrate advanced level proficiency in troubleshooting using electrical / mechanical prints.
Use electrical system knowledge and electrical schematics / prints to troubleshoot electrical components and circuits (Connecting circuit breakers, transformers, or other components in a junction box or panel). Perform tasks at an intermediate level with electrician supervision: Wiring harnesses, Drive systems, Relays, Boards Motors
Modify and perform intermediate programming tasks of robots in all robotic applications.
Perform basic offline programming using RoboCAD/Robot Studio. TCP Verification, I/O Simulation, Move Creation/Modification, Zone Setups.
Intermediate weld troubleshooting for all welding applications (drawn arc, GMAW, resistance welding, projection welding, Pneumatic systems, etc.).
Use the following equipment safely at an advanced level: Hand measuring tools, Multi meters, Amp meters, Welding current meter, Digital force gauge, Micro-Ohm meter
Fixture adjustments – minor shim moves on processes based off of manufacture details (with guidance from a Weld Maintenance Mechanic III or Manufacturing Engineer).
Understanding of shimming processes.
Setup and troubleshoot Poke Yoke systems and applications.
Automation Technician IV must demonstrate competency in (2) of the below specialties: PLC Programming, Intermediate PLC programming (add sensor & change sequence), Strong understanding of ladder logic and intermediate level ability to troubleshoot issues through a PLC, Program Panel View (HMI), Troubleshoot/ Setup I/O blocks, Search, cross reference, and edit a program, Troubleshoot HMI system, Load program, Replace components (i.e., logical module, screen, etc.), Replace system, set IP address, set system name, Troubleshoot Valve Stacks, Intermediate robot programming methods, Load ID, Gun Tuning, Adding system components (i.e., add valves/ I/O blocks)
Program robot offline (write routines)
Setup / troubleshoot issues with tool changers
Setup / troubleshoot issues with external axes
TCP creation and verification (experience with ABB Bullseye system is a plus)
Creating offset positions
Replace motors, resolvers, serial pulse coders
Intermediate Weld Troubleshooting
If needed, rebuild or reload schedules. Make changes as directed by Weld Engineers using RAFT
Emhart DA schedule changes as directed by Weld Engineers
Conduct preventive maintenance activities on specialty equipment
MIG weld schedule changes as directed by Weld Engineers
Cap / Electrode studies and weld validation
Calibrate squeeze force on spot weld guns
Troubleshoot Drawn Arc Stud Welding issues as well as basic programming
Troubleshoot/ setup projection welds
Working knowledge of Miyachi Weld Tester
**When and Where:
**Available Shifts:
1st shift
5:30am - 1:30pm M-F
2nd shift
1:30pm - 9:30pm M-F
3rd shift
9:30pm - 5:30am S-Th
Occasionally, this may require you to arrive early, stay late, or work on weekends, outside of our regular hours, to ensure we successfully meet customer needs, deadlines, or urgent requests.
What You Need to Have:
High School Diploma or equivalent (required)
Ability to obtain industrial truck and aerial platform licenses (required)
Excellent verbal communication skills (required)
Experience with Microsoft applications (i.e., word, excel, outlook, etc.)
Successful completion of Automation Technician II written and performance tests (internal candidates)
Successful completion of Automation Technician II written and performance tests (internal and external candidates)
Knowledge of PLC systems and Intermediate programming methods (required)
Industrial Maintenance / Machine Repair / Electrician Journeyman certification, or 2-year technical degree, or equivalent work experience (required)
Minimum 3 years of Weld Technician, Automation Technician, or equivalent experience (required)
Mechatronics certificate or journeyperson card ()
Associates degree in mechatronics, controls, maintenance technician ()
Minimum 10 years combined experience and education as an Automation Technician or Equivalent experience and education ()
Strong electrical and mechanical background in industrial and automated systems
Steel toed boots and hard hat required on site
Challenge Manufacturing is committed to working with and offering reasonable accommodations to job applicants with disabilities. If you need assistance or an accommodation due to a for any part of the recruitment process, please contact the respective Talent Acquisition Partner.
Challenge Manufacturing is an Equal Opportunity and Affirmative Action Employer. This company will provide equal opportunity to all individuals without regard to , , , , , , , , or veteran status. Information collected regarding categories as provided by law will in no way affect the decision regarding an employment application.
Challenge Manufacturing will not discharge or in any manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a forma complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with Challenge Manufacturing's legal duty to furnish information.
Due to customer requirements, it is prohibited by federal export control laws from transferring controlled information and technology to "Foreign Persons" except as specifically authorized by the U.S. government. In the absence of such authorization, access to controlled information or technology must be limited to "U.S. Persons." Accordingly, in order to comply with export control laws, the customer is required to verify a contractor's status as being either a "U.S. Person" or a " Foreign Person."
You should be proficient in:
PLC Troubleshooting Skills
Industrial and Manufacturing Engineering
Electrical Schematics
Troubleshooting Skills
CAD Software
Industrial Robot Programming
Troubleshooting Industrial Automation Equipment
Production Optimization
PLC Programming Experience
Electrical / Electronic Systems
Machines & technologies you'll use:
MIG Welder
TIG Welder
CNC Automation Solutions (Fanuc)
Automotive Vehicles
Robotic Welder
CAD Software
HMI
Industrial Robot (Kawasaki, Universal Robotics, Fanuc)