Kennametal
Machine Maintenance Technician Experienced-US
Kennametal, Rogers, Arkansas, United States, 72758
Machine Maintenance Technician Experienced-US
Location: Rogers, AR, US Shift: 3rd, 11pm - 7:30am, Sunday - Thursday Job Summary: Perform predictive/preventive maintenance analysis to anticipate and circumvent equipment failures, enhancing uptime and reducing costs. Key Job Responsibilities: Performs specialized technical tasks required to support operations (e.g., IT development, research support, skilled trade) Performs preventive maintenance and repairs on equipment and systems (e.g., mechanical, electrical) Evaluates and recommends equipment improvements to improve availability, capability, and yield Performs equipment failure analyses (including preventive and unscheduled maintenance) Troubleshoots and diagnoses equipment problems Prepares technical reports to document equipment modifications and equipment maintenance procedures Prepares for new/relocated equipment installations by sizing, wiring, piping, ventilation, etc. according to incoming equipment requirements Receive, rig, unload, transport, install, assemble, troubleshoot, and fine tune new/relocated equipment Troubleshoot and perform necessary repairs on existing equipment Assist engineers in identifying worn or damaged parts that may be needed to complete the repair Interface with and assist outside contractors, OEM's and Technology Process Support groups, in all attempts to install new and repair or upgrade existing processes Safely handle hazardous materials and hazardous wastes Interface with in-plant Computerized Machine Maintenance System to show status of work and time spent on job Complexity: Works with a moderate degree of supervision Works within standard operating procedures and/or scientific methods Education, Work Experience, Skills, Certificates: Necessary to perform the job at the minimum acceptable level and preferred: Minimum Level of Education (for Job): High School, Associates/Technical, Bachelor's Degree, Master's Degree, PhD Years of Relevant Work Experience Required: 1-3 Years Preferred Areas of Education, Certifications, and Skills: Requires vocational training or the equivalent experience and may require external certification but typically does not require a university degree Able to do basic math. Ability to read and understand equipment manuals, work orders, schematic and blueprints. Ability to use a personal computer and various software such as SAP MII. Ability to read and comprehend Schematics, Multi-Meter & Ammeter Utilization, 3 phase & Single phase motor control, PLC & Ladder Logic programming & understanding (AB SLC-500 & Micrologix, Control logix), Soldering, Mechanical, Power tool usage capability, Welding: Arc and/or TIG, Pipe fitting; Soldering / Threading, Power Transmission applications knowledge (Gearboxes, sprockets, & Belts), Pneumatics / Hydraulics. Ability to communicate verbally and in writing with plant personal, supervisors, and managers. Has working knowledge and skills to perform a defined set of analytical/scientific methods or operational processes. Applies experience and skills to complete assigned work within own area of expertise. Required Licenses & Certificates: (e.g., Driver's License, Accounting Certification, Citizenship, Engineering Certification) Must have successfully completed training for, and is certified or pursuing certification as a State Journeyman, appropriate to plant location, in electrical or machine maintenance OR has 2 - 5 years or more documented maintenance repair experience in a manufacturing environment. Total Span of Control and Authority: Role Reports to Manager Job Title: People Management: No Yes Direct Reports Job Title(s): Geographical Scope: North America Management Scope: None Relationships: Nature and purpose of interactions external & Internal External Relationships: Internal Relationships: Travel, Physical Requirements, Working Conditions and Equipment: Time spent traveling & physical requirements, working conditions, and equipment used if applicable Travel Required No Domestic Global % of Time Choose an item. (Required in U.S. Optional for other countries) Physical Requirements: Carrying/Lifting Climbing Crawling Kneeling/Stooping Driving Standing Sitting Walking Pushing/Pulling Working Conditions: Office Laboratory Plant Floor Various Shifts Overtime, Weekends, & Holidays Extreme heat/cold Heights/Elevated Platforms Confined Spaces Dust/Fumes/Gases/Chemicals Loud Noise Equipment: Computer/keyboard Safety Glasses Safety Shoes Hard Hat Power Tools Heavy Machinery Due to the nature of the operations at this facility, consideration as an applicant is limited to individuals who are either a US Citizen or a US Permanent Resident. An expression of interest from anyone who is not a US Citizen or a US Permanent Resident will not proceed for consideration as an applicant. Equal Opportunity Employer
Location: Rogers, AR, US Shift: 3rd, 11pm - 7:30am, Sunday - Thursday Job Summary: Perform predictive/preventive maintenance analysis to anticipate and circumvent equipment failures, enhancing uptime and reducing costs. Key Job Responsibilities: Performs specialized technical tasks required to support operations (e.g., IT development, research support, skilled trade) Performs preventive maintenance and repairs on equipment and systems (e.g., mechanical, electrical) Evaluates and recommends equipment improvements to improve availability, capability, and yield Performs equipment failure analyses (including preventive and unscheduled maintenance) Troubleshoots and diagnoses equipment problems Prepares technical reports to document equipment modifications and equipment maintenance procedures Prepares for new/relocated equipment installations by sizing, wiring, piping, ventilation, etc. according to incoming equipment requirements Receive, rig, unload, transport, install, assemble, troubleshoot, and fine tune new/relocated equipment Troubleshoot and perform necessary repairs on existing equipment Assist engineers in identifying worn or damaged parts that may be needed to complete the repair Interface with and assist outside contractors, OEM's and Technology Process Support groups, in all attempts to install new and repair or upgrade existing processes Safely handle hazardous materials and hazardous wastes Interface with in-plant Computerized Machine Maintenance System to show status of work and time spent on job Complexity: Works with a moderate degree of supervision Works within standard operating procedures and/or scientific methods Education, Work Experience, Skills, Certificates: Necessary to perform the job at the minimum acceptable level and preferred: Minimum Level of Education (for Job): High School, Associates/Technical, Bachelor's Degree, Master's Degree, PhD Years of Relevant Work Experience Required: 1-3 Years Preferred Areas of Education, Certifications, and Skills: Requires vocational training or the equivalent experience and may require external certification but typically does not require a university degree Able to do basic math. Ability to read and understand equipment manuals, work orders, schematic and blueprints. Ability to use a personal computer and various software such as SAP MII. Ability to read and comprehend Schematics, Multi-Meter & Ammeter Utilization, 3 phase & Single phase motor control, PLC & Ladder Logic programming & understanding (AB SLC-500 & Micrologix, Control logix), Soldering, Mechanical, Power tool usage capability, Welding: Arc and/or TIG, Pipe fitting; Soldering / Threading, Power Transmission applications knowledge (Gearboxes, sprockets, & Belts), Pneumatics / Hydraulics. Ability to communicate verbally and in writing with plant personal, supervisors, and managers. Has working knowledge and skills to perform a defined set of analytical/scientific methods or operational processes. Applies experience and skills to complete assigned work within own area of expertise. Required Licenses & Certificates: (e.g., Driver's License, Accounting Certification, Citizenship, Engineering Certification) Must have successfully completed training for, and is certified or pursuing certification as a State Journeyman, appropriate to plant location, in electrical or machine maintenance OR has 2 - 5 years or more documented maintenance repair experience in a manufacturing environment. Total Span of Control and Authority: Role Reports to Manager Job Title: People Management: No Yes Direct Reports Job Title(s): Geographical Scope: North America Management Scope: None Relationships: Nature and purpose of interactions external & Internal External Relationships: Internal Relationships: Travel, Physical Requirements, Working Conditions and Equipment: Time spent traveling & physical requirements, working conditions, and equipment used if applicable Travel Required No Domestic Global % of Time Choose an item. (Required in U.S. Optional for other countries) Physical Requirements: Carrying/Lifting Climbing Crawling Kneeling/Stooping Driving Standing Sitting Walking Pushing/Pulling Working Conditions: Office Laboratory Plant Floor Various Shifts Overtime, Weekends, & Holidays Extreme heat/cold Heights/Elevated Platforms Confined Spaces Dust/Fumes/Gases/Chemicals Loud Noise Equipment: Computer/keyboard Safety Glasses Safety Shoes Hard Hat Power Tools Heavy Machinery Due to the nature of the operations at this facility, consideration as an applicant is limited to individuals who are either a US Citizen or a US Permanent Resident. An expression of interest from anyone who is not a US Citizen or a US Permanent Resident will not proceed for consideration as an applicant. Equal Opportunity Employer