Clearance Jobs
Mechanical Engineering Position
You will evaluate mechanical engineering work performed by others to ensure compliance with engineering practices and specifications. You will plan and oversee the testing of mechanical systems to solve design and operational problems. You will create schedules and project milestones to facilitate timely project completion, including the direction of installation of equipment and performance of upgrades. You will exercise general systems engineering oversight including review of systems engineering processes. You will direct shipboard certification test efforts for ALRE systems. Requirements: Must be a US Citizen. Must be determined suitable for federal employment. Must participate in the direct deposit pay program. New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov Generally, current federal employees applying for GS jobs must serve at least one year at the next lower grade level. This requirement is called time-in-grade. Time-in-grade requirements must be met by the closing date of this announcement. Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326. Males born after 12-31-59 must be registered for Selective Service. This is a bargaining unit position. You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal. This position is covered under the Defense Acquisition Workforce Improvement Act (DAWIA). Certification in the Acquisition Functional Area and category assigned to the position is required within established category timeframes. This is a Financial Management Level II certified position per the National Defense Authorization Act (NDAA) 2012, Section 1599d. You must achieve this level within prescribed timelines. Certification requirements are in DoD Instruction 1300.26. This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time. Qualifications: Your resume must demonstrate at least one year of specialized experience at or equivalent to the GS-12 grade level or pay band in the Federal service or equivalent experience in the private or public sector. Specialized experience must demonstrate the following: Serving as a technical expert on ALRE Software/Systems Test Engineering performance criteria and test compliance to prepare comprehensive Test Directives which are distributed to all personnel involved in the project. Facilitating initial development and evaluation phase of a given program, coordinating with various divisions, agencies, and groups involved in the execution of a project. Establishing and scheduling start and completion dates for all phases of installation of AAG or EMALS equipment and upgrades. Arranging for effective utilization of deadloads or available aircraft, ensuring that all supportive services are aware of scheduled events. Providing instrumentation support as to whether data should be removed and processed after each test or whether more than one test may be run before the raw data and film coverage should be analyzed. Education: Applicants must meet the following basic education requirements of the Office of Personnel Management (OPM) Qualifications Standards Manual: Successful completion of a professional engineering degree. To be acceptable, the program must: Lead to a bachelor's degree (or higher) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); or Include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. Additional information: This position is covered by the Department of Defense Priority Placement Program. Additional vacancies may be filled by this announcement. A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments. During the application process you will have the ability to opt-in to make your resume available to hiring managers in the agency who have similar positions in the local commuting area. Depending on the hiring organization and the position being filled, job requirements (e.g., security clearance, travel, drug testing, financial disclosure filing, bargaining unit status, etc.) may vary. Other hiring managers filling similar positions may offer relocation expense reimbursement and/or may offer recruitment incentives for new employees, depending on funding availability and in accordance with policy. If you opt-in and are referred on a certificate, your resume will be available to other hiring managers for 180-days from the date the job announcement closes. Opting in does not impact your application for this announcement, nor does it guarantee further consideration for additional positions. Federal annuitant information: The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants. Policy information may be found at: PPP applicants will be placed at the FPL, if determined Well Qualified (WQ). To receive priority consideration, the FPL must be the same grade level or equivalent of the retained grade or the grade held immediately prior to separation. ICTAP Applicants: To be considered well-qualified and exercise selection priority as an ICTAP candidate, displaced Federal employees must satisfy all qualification requirements for the position and receive a rating in the highly qualified category (score 85) or higher. ICTAP candidates must provide copies of all of the following documentation at the time of application: 1) agency notice; 2) most recent performance appraisal; and 3) most recent SF-50 or notification of personnel action that includes position, grade level, and duty location. Applicants who do not provide this documentation will not receive consideration as an ICTAP candidate. Military Spouse Preference applicants will be placed at the highest grade for which they have applied and are determined Best Qualified (BQ). A BQ military spouse possesses knowledge, skills, abilities, and competencies comparable to others who meet the competitive referral criteria for the specific position.
You will evaluate mechanical engineering work performed by others to ensure compliance with engineering practices and specifications. You will plan and oversee the testing of mechanical systems to solve design and operational problems. You will create schedules and project milestones to facilitate timely project completion, including the direction of installation of equipment and performance of upgrades. You will exercise general systems engineering oversight including review of systems engineering processes. You will direct shipboard certification test efforts for ALRE systems. Requirements: Must be a US Citizen. Must be determined suitable for federal employment. Must participate in the direct deposit pay program. New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov Generally, current federal employees applying for GS jobs must serve at least one year at the next lower grade level. This requirement is called time-in-grade. Time-in-grade requirements must be met by the closing date of this announcement. Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326. Males born after 12-31-59 must be registered for Selective Service. This is a bargaining unit position. You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal. This position is covered under the Defense Acquisition Workforce Improvement Act (DAWIA). Certification in the Acquisition Functional Area and category assigned to the position is required within established category timeframes. This is a Financial Management Level II certified position per the National Defense Authorization Act (NDAA) 2012, Section 1599d. You must achieve this level within prescribed timelines. Certification requirements are in DoD Instruction 1300.26. This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time. Qualifications: Your resume must demonstrate at least one year of specialized experience at or equivalent to the GS-12 grade level or pay band in the Federal service or equivalent experience in the private or public sector. Specialized experience must demonstrate the following: Serving as a technical expert on ALRE Software/Systems Test Engineering performance criteria and test compliance to prepare comprehensive Test Directives which are distributed to all personnel involved in the project. Facilitating initial development and evaluation phase of a given program, coordinating with various divisions, agencies, and groups involved in the execution of a project. Establishing and scheduling start and completion dates for all phases of installation of AAG or EMALS equipment and upgrades. Arranging for effective utilization of deadloads or available aircraft, ensuring that all supportive services are aware of scheduled events. Providing instrumentation support as to whether data should be removed and processed after each test or whether more than one test may be run before the raw data and film coverage should be analyzed. Education: Applicants must meet the following basic education requirements of the Office of Personnel Management (OPM) Qualifications Standards Manual: Successful completion of a professional engineering degree. To be acceptable, the program must: Lead to a bachelor's degree (or higher) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); or Include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. Additional information: This position is covered by the Department of Defense Priority Placement Program. Additional vacancies may be filled by this announcement. A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments. During the application process you will have the ability to opt-in to make your resume available to hiring managers in the agency who have similar positions in the local commuting area. Depending on the hiring organization and the position being filled, job requirements (e.g., security clearance, travel, drug testing, financial disclosure filing, bargaining unit status, etc.) may vary. Other hiring managers filling similar positions may offer relocation expense reimbursement and/or may offer recruitment incentives for new employees, depending on funding availability and in accordance with policy. If you opt-in and are referred on a certificate, your resume will be available to other hiring managers for 180-days from the date the job announcement closes. Opting in does not impact your application for this announcement, nor does it guarantee further consideration for additional positions. Federal annuitant information: The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants. Policy information may be found at: PPP applicants will be placed at the FPL, if determined Well Qualified (WQ). To receive priority consideration, the FPL must be the same grade level or equivalent of the retained grade or the grade held immediately prior to separation. ICTAP Applicants: To be considered well-qualified and exercise selection priority as an ICTAP candidate, displaced Federal employees must satisfy all qualification requirements for the position and receive a rating in the highly qualified category (score 85) or higher. ICTAP candidates must provide copies of all of the following documentation at the time of application: 1) agency notice; 2) most recent performance appraisal; and 3) most recent SF-50 or notification of personnel action that includes position, grade level, and duty location. Applicants who do not provide this documentation will not receive consideration as an ICTAP candidate. Military Spouse Preference applicants will be placed at the highest grade for which they have applied and are determined Best Qualified (BQ). A BQ military spouse possesses knowledge, skills, abilities, and competencies comparable to others who meet the competitive referral criteria for the specific position.